SKU: 91020343483
mccoy hanging planter

mccoy hanging planter Early McCoy Pottery Hanging Planter (c.1920s) – Rush Creek Vintage

Sale price$22.00 Regular price$24.45
Save 10%

Pay in installments of $6.11 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 29 - Sep 3

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

mccoy hanging planter Early McCoy Pottery Hanging Planter (c.1920s) – Rush Creek VintageOur early McCoy hanging pottery planter is a real workhorse all year long, showing off your houseplants or summer blooms, inside or out. The pot has three raised rings around the rim and a leaf and berry design on the front and back, with a brown and green matte glaze finish. There are three holes for hanging the planter near the rim, plus small feet on the bottom to balance the pot if you choose to use it as a "sitter" and not hang it. Rustic and


Our early McCoy hanging pottery planter is a real workhorse all year long, showing off your houseplants or summer blooms, inside or out.

The pot has three raised rings around the rim and a leaf and berry design on the front and back, with a brown and green matte glaze finish. There are three holes for hanging the planter near the rim, plus small feet on the bottom to balance the pot if you choose to use it as a "sitter" and not hang it.

Rustic and earthy with understated elegance, this lovely art pottery is early McCoy at its best. Popular during the Arts and Crafts movement, it remains highly collectible today. What a great piece of pottery history to own!

The Nelson McCoy Sanitary and Stoneware Company was established 1910 in Roseville, Ohio. For more information on vintage and antique McCoy art pottery, visit the McCoy Pottery website.

** For more Vintage Home Decor, click here!

Listing Includes

- ONE vintage McCoy pottery hanging basket planter with hooks and chain; leaf and berry motif (as shown)

Item Condition

In very good preloved condition for art pottery nearly 100 years old. Overall wear consistent with age and use. Mild surface scratches, marks and crazing present. No visible chips or structural cracks noted. There are three glaze pops/pin marks inside the bottom from where the pot sat on the pins in the kiln for firing. The interior shows accretions and lime build up from previous potted plant, which can be removed by new owner. Chain and hooks included, showing oxidation, discoloration and light rust.

(We typically do not clean or polish vintage items to preserve original patina.)

Item Details

- Materials: earthenware, matte glaze, metal chain/hooks

- Color: medium tan brown, faded teal green, cream

- Dimensions: 7.25" W (widest point) x 4.5"H; top rim is 5.5" W

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 91020343483

Discover Niche Categories That Outsell mccoy hanging planter

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
kpdrumswritessings
Dallas, US
★★★★★ 5
real time and energy saver, as well as $
Size: 16AWG Wiring Harness-2 Leads
If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2024
M
Verified Purchase
Miguel
Port Orchard, US
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
M
Verified Purchase
Marina De Leon
Cuba, US
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
D
Verified Purchase
Dan from Georgia
Belleville, US
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
N
Verified Purchase
Nate Higgers
Carnegie, US
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026

recommand products