SKU: 20186212965
automatic watering system for potted plants

automatic watering system for potted plants Spider Farmer 4 Self-watering System Kits

$21.27 $23.63
Save 10%
No.2 Bestseller on virtipatel.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

automatic watering system for potted plants Spider Farmer 4 Self-watering System KitsSpider Farmer 4 Pot Self Watering System Kits for Use in Indoor Grow Tents & Greenhouses : Spider Farmer self watering system uses gravity to automatically feed water from a generous 13 gallon reservoir directly to each pot base, ensures your plants stay perfectly hydratedno electricity needed, no daily checks required. Say goodbye to manual watering with this system that keeps your plants hydrated effortlessly : Using wick lines, plants absorb only

Spider Farmer 4-Pot Self-Watering System Kits for Use in Indoor Grow Tents & Greenhouses

  • 𝐇𝐀𝐒𝐒𝐋𝐄-𝐅𝐑𝐄𝐄 𝐀𝐔𝐓𝐎 𝐖𝐀𝐓𝐄𝐑𝐈𝐍𝐆 𝐒𝐘𝐒𝐓𝐄𝐌: Spider Farmer self-watering system uses gravity to automatically feed water from a generous 13-gallon reservoir directly to each pot base, ensures your plants stay perfectly hydrated—no electricity needed, no daily checks required. Say goodbye to manual watering with this system that keeps your plants hydrated effortlessly
  • 𝐏𝐑𝐄𝐂𝐈𝐒𝐄 𝐌𝐎𝐈𝐒𝐓𝐔𝐑𝐄 𝐂𝐎𝐍𝐓𝐑𝐎𝐋: Using wick lines, plants absorb only the water they need, ensuring a balanced watering system that prevents over or under-watering. This self-watering system is designed to keep your plants healthy with the ideal moisture levels
  • 𝐋𝐎𝐍𝐆-𝐋𝐀𝐒𝐓𝐈𝐍𝐆 𝐖𝐀𝐓𝐄𝐑 𝐒𝐔𝐏𝐏𝐋𝐘: Fill the 13-gallon reservoir once and enjoy up to 2 weeks of automatic watering! This 4-pack self-watering system will keep your plants happy and lush, even when you’re on vacation
  • 𝐀𝐃𝐉𝐔𝐒𝐓𝐀𝐁𝐋𝐄 𝐖𝐈𝐂𝐊 𝐋𝐈𝐍𝐄 𝐏𝐎𝐒𝐈𝐓𝐈𝐎𝐍𝐒: Designed to fit your growing needs, each fabric pot base features three sets of wick positions to fit different pot sizes. You can seamlessly switch between 1-2, 3, and 5-7 gallon grow bags, providing a versatile self-watering pot base for various plant needs and pot sizes
  • 𝐀𝐋𝐋-𝐈𝐍-𝐎𝐍𝐄 𝐒𝐄𝐋𝐅-𝐖𝐀𝐓𝐄𝐑𝐈𝐍𝐆 𝐊𝐈𝐓: Get everything you need in one powerful package: four self-watering bases, a 13-gallon water reservoir, five 5-gallon grow bags, wick lines, shut-off value box and water tubes. Just set it up and watch your plants thrive!
  • 𝐈𝐃𝐄𝐀𝐋 𝐅𝐎𝐑 𝟒𝐱𝟒 & 𝟓𝐱𝟓𝐅𝐓 𝐆𝐑𝐎𝐖 𝐓𝐄𝐍𝐓𝐒: Each base features a 15.6-inch diameter, perfectly designed to fit 4×4 and 5x5ft grow tents. The Spider Farmer 4-Pot Self-Watering System ensures efficient hydration for your plants, reducing manual watering and optimizing growth. Grow smarter, not harder!
  • Can support 4L of water per plant per week.
  • Keeps 4 plants watered for 3 weeks
  • Silent hydration for your indoor garden — keeps your plants nourished without disturbing your peace.
  • Tips:
    • For best results, lay the Self-Watering Fabric Pot Base, Shut-off Valve Box, and tubes flat on the ground, and always keep the folding bucket filled with water
    • It is recommended to clean the basin every two weeks to prevent root clogging
    • Recommended tent sizes: 120cm x 120cm/ 150cm x 150cm Grow Tent
    • Self-watering pots work best once the roots are well-developed. Seedlings have shallow roots that may not reach the moist soil, so it’s best to wait until they grow longer and stronger.
    • DIY Self-Watering System: Customize your watering needs by adjusting the number of wicks—more wicks, more water. Simple and flexible for every plant.
  • Package contents:
    4x Self-watering Fabric Pot Base
    1x 50L Folding Bucket
    5 X 5 Gallon Grow Bag
    1 X Silicone Tube (4M)
    1X Shut-Off Valve Box
    1X User Manual (Check More)

User Manual

Disclaimer

As with all drip or gravity-fed systems, occasional cleaning is required to prevent root or nutrient buildup. Performance may vary based on plant type, nutrient concentration, and environment.

 

1.What are the advantages of the Spider Farmer Self-watering system?

（1）Gravity-Fed Watering System: No Electricity Required, Zero Energy Consumption

Our automatic watering system operates without any power or main water pressure. It relies on gravity to provide a continuous water supply. To ensure optimal performance, please keep the Self-Watering Fabric Pot Base, Shut-off Valve Box, and all silicone tubes flat on the ground. Additionally, ensure that the folding bucket is always filled with water for a consistent flow.

By leveraging gravity, our system effortlessly delivers water to your plants as needed, ensuring they stay hydrated without the hassle of manual watering.

（2）Supports Up to 130 lbs: Robust Base for Heavy-Duty Plant Containers

Engineered for strength, the system’s base is designed to support up to 130 lbs, making it ideal for larger or heavier pots. Whether you’re managing a large garden setup or working with dense soil and substantial plants, this system offers the stability and durability needed for long-term performance.

（3）Accommodates Up to 7-Gallon Fabric Pots

Versatility meets capacity. Our self-watering kits is compatible with self-watering plants pots up to 7 gallons, providing ample space for root development and plant growth. This flexibility makes it suitable for a wide range of plants, from vegetables and fruits to ornamental flowers and shrubs.

（4）Engineered for Durability: Built to Last for Years of Repeated Use

Constructed from premium-grade materials, this system is designed to withstand the rigors of continuous use. Resistant to wear and tear, it ensures reliable performance across multiple growing seasons, offering long-term value and reducing the need for replacements.

（5）Complete Watering Solution: Includes Reservoir, Self-Watering Pots Bases, Cotton Rope, and Grow Bags

The kit offers a comprehensive solution for self-watering, featuring a water reservoir, self-watering pot bases, efficient wick lines for controlled moisture distribution, and durable 5-gallon fabric grow bags. This all-in-one package provides everything you need for quick setup and optimal plant hydration.

（6）Innovative Reservoir Plate: Prevents Algae Growth and Water Buildup

The integrated reservoir plate elevates your fabric pot above standing water, preventing stagnation and reducing the risk of algae formation. This thoughtful design promotes a healthier root environment and decreases maintenance, helping to extend the system’s lifespan while ensuring optimal plant health.

2. What size tents are suitable for matching 2 / 4 pcs Self-watering Kits?

2 pcs Self-watering Pots Base System Kit: 3×3’/4×2′ Grow Tent
4 pcs Self-watering Pots Base System Kits: 4X4’/ 5X5′ Grow Tent

3.50L Water Reservoir Duration for Different Setups

Knowing how long a filled 50L water bucket will last is essential for proper plant care. Keep in mind that actual duration may vary based on the type of plants and their growth stages. Here’s a general guideline for our self-watering system:

2-Pot Setup:
A full 50L bucket typically lasts about one month for two self-watering fabric pots, providing consistent moisture for healthy growth.

4-Pot Setup:
In a four-pot configuration, the same 50L reservoir will last around two weeks. This is great for ensuring multiple plants receive adequate hydration while reducing maintenance.

Note:
Different plants have different water needs. Monitor them regularly to adjust for optimal moisture levels.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 20186212965

Discover Niche Categories That Outsell automatic watering system for potted plants

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 687 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Ricky stein
Draper, US
★★★★★ 1
Don’t buy
Set name: K2 SE Combo, Set name: K2 SE Combo
This printer is pretty awesome. Here is the biggest catch to it. We have spent hundreds of dollars on the app and or validating what we could buy between buying filament and everything else. This thing does not connect properly. It is very technical if you are not smart. This is a terrible thing to buy. I’m a very educated person and so are the other 3 to 4 people in my household that have all tried to use this thing it will not let you change individuals to print off it and even the amount of money you spend to buy credit credits and or other items that you want to purchase in the store do not print properly. This sucks don’t buy it even though this equipment is awesome. This is the worst thing I wish I’d never bought. I do not say this in the test and or ignorance I have studied. I have read up. I’ve looked at forums. I’ve been on Reddit. Everyone says this creatality is extremely difficult and we have definitely found this out firsthand. I would definitely return this, but I think my window has closed. It sucks when you buy a product and you have it for like 2 to 3 weeks before you get to use it but then your window to return it is closed. The app does not match what is online and or if you have more than one person that wants to print, you cannot share unless the other person is logged out and even if the person is logged out, it does not always match the same, so for example, I have tons of money and credit on my account, but it will not let me print out certain apps and or creations then it tells me that it will work on our item that we have purchased, but then it’ll say it does not work. It will not print. 3-D printer is a scam. It sucks. It has great potential but this is not the one for you. Don’t waste your money too much money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
E
Verified Purchase
Elton Smith
Natrona Heights, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Lexington, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Lowell, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Omaha, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025

recommand products

Hoss Garden Seeder
21.17
Geranium Seeds
22.15
Peach Geranium Pelargonium Seeds for Planting – Heirloom Non-GMO Organic Garden Seeds, High Germination
26.73
Hand Push Seeder Planter With 7 Nozzles, Manual Seed Drill And Spreader For Gardens, Row Planting Machine, Handy For Corn Soy Peanut Cotton Soybean,
29.81
Geranium Seeds 'Horizon Star'
26.07