Pay in installments of $7.07 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
philodendron brandtianum soil Philodendron brandtianum – Foliage FactoryPhilodendron brandtianum Philodendron brandtianum is a climbing species with small, heart shaped juvenile leaves marked in strong silver grey between the veins. It can trail when young, but its natural habit is appressed climbing, with stems growing close to trunks or other vertical surfaces. Juvenile leaves stay smaller and strongly silver marked, with green showing around the veins and margins. Older climbing growth may produce larger, greener
Philodendron brandtianum
Philodendron brandtianum is a climbing species with small, heart-shaped juvenile leaves marked in strong silver-grey between the veins. It can trail when young, but its natural habit is appressed climbing, with stems growing close to trunks or other vertical surfaces.
Juvenile leaves stay smaller and strongly silver-marked, with green showing around the veins and margins. Older climbing growth may produce larger, greener leaves with a lighter silver pattern than the juvenile growth usually sold as a houseplant.
Philodendron brandtianum juvenile leaf pattern
- Leaf pattern: Heart-shaped juvenile leaves with strong silver-grey marking between the veins.
- Growth habit: An appressed climber that grows close to trunks and branches in habitat.
- Native range: Native to southern Colombia, northern Brazil and Bolivia.
- Biome: Recorded from the seasonally dry tropical biome.
Philodendron brandtianum adult leaf change
Philodendron brandtianum was published by K. Krause in 1913. The species is native to southern Colombia, northern Brazil and Bolivia.
The juvenile leaves are green, heart-shaped and overlaid with silver. Older climbing growth may become larger and greener, with less of the heavy silver pattern seen on juvenile leaves. On support, the plant can make a denser column of juvenile growth; left to hang, stems often stay thinner and leaves smaller.
Philodendron brandtianum support and leaf care
- Support: Use a slim pole, plank, or textured stake for its smaller leaves and close-climbing habit.
- Light: Give bright, diffused light to support denser growth. Direct sun can mark the thinner juvenile leaves.
- Temperature: Keep warm, ideally around 18–28°C, and avoid cold draughts or chilled windows.
- Watering: Let the top 25–40% of the pot dry before watering. This species tolerates slight drying better than a constantly wet root zone.
- Substrate: Use a loose mix with bark, perlite, and a moisture-holding organic base so fine roots get both air and even moisture.
- Humidity: Average indoor humidity is often tolerated, but higher humidity reduces dry tips and helps fresh leaves open smoothly.
- Repotting: Move up one pot size when roots fill the container, the mix dries very quickly, or the support needs a steadier base.
- Feeding: Feed lightly during active growth with a balanced houseplant fertilizer, avoiding strong doses on dry roots.
- Propagation: Propagate from stem cuttings with at least one node; rooted tips and sections with aerial roots establish fastest.
- Pruning: Trim long stems above a node to encourage fuller growth, then root the cuttings to thicken the pot.
- Semi-hydroponics: Suitable for mineral or semi-hydro setups if transitioned gradually and kept with airflow around the crown.
Philodendron brandtianum pattern and stem issues
- Weak silver pattern: Check light first. Very low light can make growth thinner and less defined.
- Crispy tips: Often linked to dry air, irregular watering, or salt buildup. Flush the mix occasionally and avoid overfeeding.
- Thin, stretched stems: Move the plant closer to bright filtered light and give it a surface to climb.
- Yellowing after watering: Inspect the roots and lower stem. Fine or compacted soil can stay wet long enough to cause root stress.
- Pests: Check leaf undersides, petioles and stem nodes for spider mites, thrips, scale or mealybugs, especially on dense growth.
Philodendron brandtianum is harmful if eaten and may irritate skin or eyes through sap contact. Keep it away from pets and rinse your hands after pruning.
Philodendron brandtianum etymology and description history
The genus name Philodendron comes from Greek roots meaning “tree-loving”. Philodendron brandtianum was described by K. Krause in Das Pflanzenreich in 1913.
Order Philodendron brandtianum online for silver-marked heart-shaped leaves on a compact climbing Philodendron.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 23 reviews
Sort
Product Reviews
★★★★★ 4
The basic set-up is relatively easy which was a big plus for me......
First let me start off by saying that I am not an audiophile. So, this review will not get into the weeds of the more complex settings this receiver is capable of. For example, the Dirac room measuring option. No way was I attempting to mess with that. Especially, after reading that some reviewers who actually have experience with Dirac found it could be confusing/difficult to set up. Besides I come from a previous Onkyo the TX-SR607 which had the AccuEQ Room Calibration similar to this receiver, so I used that instead with no issues. As far as hooking up the speakers it's pretty straight forward. If you have banana plugs, use them, seriously. I originally planned on using banana plugs but in order to save time I decided against that. But I wish I had taken the extra time to go with bananas because trying to thread the speaker wire into the speaker terminals is tedious, there not much room between the terminals and even me with my skinny fingers struggled a bit. Wish Onkyo designed their terminals side by side, but I think only Denon does that. Anyway, after all the speakers were connected (I'm currently using a 5.1.2 setup) and I connected my tv, Blu-ray player, CD player, etc., etc., I ran the AccuEQ Room Calibration, and I was good to go. I did change the some of the settings like speaker volume that AccuEQ has set but nothing major. I have noticed that I need to turn the volume up much higher on this Onkyo than on my previous one. What I mean by that is that on my previous Onkyo I would set the volume indicator at around 30-35 tops for movies. With this one it's more like 40-45, maybe how the volume is measured is different on this one. The sound is excellent for movies and music I have no complaints there. I have only tried a few of features so far like Airplay but will dig deeper into the manual (I downloaded from the internet) as time goes by. I will say as far as build quality is concerned it's not bad, but IMO my old Onkyo, a 2009 model, had the look and feel of a more expensive receiver. But it's what's inside that matters most so hopefully this one last as long as my previous Onkyo.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2024
★★★★★ 1
Sound unexpectantly blasted for no reason. It malfunctioned!
I spent hours between installation and set up! I had to return it. I turned on NET (network) to play Sirius Xm and the volume was low but after a few minutes the sound turned all the way up to maximum completely on its own? This happened at least two more times. I contacted ONKYO and was told it is clearly defective and that their is no solution to correct the problem, and that I should return it immediately! I purchased the newer model and am pleased with its performance! It’s unfortunate because the first one that had the issue with the sound really played nice, but having sound change its volume so suddenly to its full capacity was not what I expected, nor felt comfortable enough to keep as I said I was told to return it, which I did! My advice here would be to purchase the newer model, which seems to be much more stable in its performance, and the quality is excellent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Absolutely Love This Receiver
The Onkyo TX‑NR7100 has completely transformed my home theater. The sound quality is rich, detailed, and powerful, and the 9.2‑channel setup gives movies and music a level of immersion I didn’t realize I was missing. Dirac Live right out of the box is a huge win — the room correction made an immediate, noticeable improvement.
Setup was smooth, the interface is clean, and everything from streaming to switching inputs feels fast and reliable. It also plays perfectly with the rest of my system, and the THX certification really shows in how cinematic everything sounds.
I absolutely love this receiver. It’s one of those upgrades that makes you wonder why you didn’t do it sooner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so.
For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes.
But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices.
I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround.
Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them.
It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet.
This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could.
JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr.
Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy.
Update:
Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025