Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex cabin size Cybex Gazelle S Stroller, Sky Blue (Taupe Frame)The CYBEX Gazelle S is the ideal first stroller that includes a removable shopping basket with an impressive additional carrying capacity of 25 lbs. Adapting to the changing needs of your family, the Gazelle S can easily convert from a single to a double stroller without additional adapters. Designed to support 20+ different configurations, the Gazelle S includes a near flat reclining reversible seat and is compatible with our Gazelle S Cot and all
The CYBEX Gazelle S is the ideal first stroller that includes a removable shopping basket with an impressive additional carrying capacity of 25 lbs. Adapting to the changing needs of your family, the Gazelle S can easily convert from a single to a double stroller without additional adapters. Designed to support 20+ different configurations, the Gazelle S includes a near-flat reclining reversible seat and is compatible with our Gazelle S Cot and all CYBEX Infant car seats for use from birth. Add the optional kid board (sold separately) to accommodate 3 children. Endless opportunities for your growing family!
As your family grows, convert the Gazelle S from a single to a double stroller with a second full size seat (sold separately) to allow two children to ride at the same time. Each Gazelle S seat can be used in parent-facing or forward-facing mode and can be attached on either the stroller’s upper or lower positions.
-
Easily converts from a single to double stroller without additional adapters, second seat unit sold separately
- Can fold with two seat units attached to the frame
- Unique one-pull, one-hand harness helps secure your child in seconds
- Independent reclining seat back & leg adjustments offer multiple configurations, allowing you to position your child for comfort
- Removable Shopping Basket provides extra storage up to 25 lbs.
Stroller Features
- Easily converts from a single to double stroller without additional adapters
- Folds with two seat units attached to the frame
- One-Pull Harness: Our user-friendly harness system makes securing your child in the seat a breeze with one simple pull – no fuss and extra handy if you’re doing it twice.
- Independent reclining seat back and leg adjustments offer multiple configurations, allowing you to position your child for comfort
- Supports 20+ configurations using Gazelle S Seat units, Gazelle S Cots, CYBEX infant car seats or the removable Shopping Basket
- Removable Shopping Basket provides extra storage up to 25 lbs.
- Extra-large, easy access lower basket for extra storage space while out on the go (30 lbs. max load)
- Premium design with a robust all-aluminum frame, leatherette handlebar and bumper bar, and high-quality fabrics
- All-wheel suspension with integrated frame shock absorption system provides a smooth ride over a variety of surfaces
- Streamlined fold for easy storage at home or in the car
- Extendable XXL sun canopy with mesh window and a UPF 50+ rating
- Large, reversible seat unit reclines to a near-flat position
- 50 lbs. weight capacity for each seat unit (second seat unit sold separately)
- One-hand, height-adjustable handlebar offers comfortable steering for all users
- Versatile 3-in-1 Travel System with the seat unit, Gazelle S Cot (sold separately), and any CYBEX infant car seat (sold separately) using the included adapters
- Stroller compatible with CYBEX, Maxi-Cosi® Mico 30 and Nuna PIPA™ infant car seats using the included adapters
Cot Features
-
Easy to carry and place on a stroller frame with a soft, ergonomic carry handle and memory buttons that make placement and removal from the frame achievable with one hand
- XXL sun canopy with a UPF50+ sun protection and mesh window for ventilation
- Cozy and spacious interior with soft foam cushion offers an ideal resting environment
What’s in the Box
The Cybex Gazelle S 2 Stroller includes:
- Stroller frame
- 1 x seat unit with bumper bar
- Shopping basket
- Rain cover
- Cup holder
- Car seat adapters
Specifications
- Stroller Dimensions: 41.9" L x 25.4" W x 42.7" H
- Folded Dimensions: 32.9" L x 25.4" W x 12.2" H (with wheels)
- Stroller Weight: 28.4 lbs
- Stroller Usage: From 6 months to 50 lbs.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1982 reviews
Sort
Product Reviews
★★★★★ 5
Solenoid replacement
Size: 96158T-2PCS
No changes were needed, fit exactly as the oem. Happy Happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 10, 2025
★★★★★ 1
Did not work.
Size: 96158T-2PCS
I went to double check that I can read but it says 35hp-275hp and it sure didn’t work on my 200ho mercury so I do not recommend. If you’re on a time crunch don’t push your luck buy OEM like I am doing right after this review.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
★★★★★ 5
Great Banana Plugs
Size: 6 Pairs / 12 pcs
I recently purchased these FosPower banana plugs to tidy up my speaker wiring, and they’ve been a significant improvement over bare wire ends. Installation is straightforward: strip the wire, loosen the two tiny set screws, slide the wire in, tighten everything down, and then screw the barrel back on. Once assembled, the connection feels secure and tight, making it much easier to swap gear around and reducing the risk of stray strands causing a short.
The standout feature of this design is the dual set-screw clamp. It firmly grips the speaker wire without relying on the outer collar to “crush” it in place. I’m using 12-gauge wire, and it holds well for my setup.
Initially, the plugs may fit snugly in some binding posts. Once seated, there’s no wobble, but it might take a bit of extra push the first time.
The set screws are small, so a bit of precision is needed. Use a small flathead screwdriver and don’t over-tighten them.
Overall, these plugs feel well-made, look clean once installed, and fulfill their purpose as banana plugs: making speaker connections quick, neat, and reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Great Banana Plugs!
Size: 6 Pairs / 12 pcs
These FosPower banana plugs work very well. I have used dozens of these great FosPower banana plugs over the years, and they definitely work as advertised. When comparing apples to apples (or bananas in this case....lol), all Banana plugs work virtually the same way, and these banana plugs are no different. Strip speaker wire, unscrew banana plug cover, loosen speaker wire retaining screw(s), insert speaker wire, tighten speaker wire retaining screw(s), screw on banana plug cover, and wallah, a secure/conductive speaker/amplifier wire connector is created. Albeit, some banana plugs require the speaker wire to be splayed over a hollow post, and then they are held down by a screw-on retainer/cover. However, I much prefer these FosPower dual retaining screw type of banana plugs for their speaker wire holding ability.
I always use high quality 14 gauge OFC speaker wire with these FosPower banana plugs, and they work perfectly together. I have used these FosPower banana plugs with many different speaker and amplifier brands over the years, including Klipsch, Pioneer, Polk, Denon, Dayton Audio, and Fosi with no problems at all. They just work, and work well. I have never had a FosPower banana plug break, release the speaker wire or short out, in all of the years that I have used them.
Yes, these FosPower banana plugs do fit rather tightly into the connectors, at first, on a lot of speaker and amplifier brands/models. However, after the initial "squeeze" the banana plugs will lossen up, and become easier to install and remove. However, they still retain their great holding ability even after the initial squeeze. In order to overcome this initial "tightness," I usually just stick the FosPower banana plugs into a connector of an old portable amplifier, before assembling them, in order to squeeze them before inserting them into their final speaker or amplifier destinations. This is especially useful when working in tight places, where there is not much room to work in order to push the FosPower banana plugs into their tight connections firmly.
Overall, I highly recommend these FosPower banana plugs. I am currently using them all over the house and shop for home theater and music listening (and testing projects). Just be aware of the tight fit in some speakers and amplifiers. Also, the 2 very tiny speaker wire retaining screws can be a challenge sometimes. Just use a good standard blade jewelers screwdriver, and be careful not to remove the retaining screws all of the way or over-tighten them. Once these things are mastered, using these FosPower banana plugs becomes second nature. Have fun!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 28, 2024
★★★★★ 5
Great Product
Size: 6 Pairs / 12 pcs
These banana plugs have worked perfectly, no matter what gauge I have run in them, they work great. Easy assembly and great quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
recommand products
Kokedama Kit Succulent
29.00
Rare Succulents
29.35
DIY Glitzy Succulent Planter Kit – In Succulent Love
26.76
Live Succulents Plants Bulk Plant Tray (50 Pack), Indoor Houseplants, in Cactus and Succulent Soil Mix, Kit Gifts by for Pets, Black
28.99
Black Rose Succulent Drop In – Purple Rose & Co
29.36