SKU: 3446720043
my white princess philodendron

my white princess philodendron Philodendron 'White Princess' – Foliage Factory

Sale price$26.01 Regular price$28.90
Save 10%

Pay in installments of $7.22 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 16 - Oct 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

my white princess philodendron Philodendron 'White Princess' – Foliage FactoryPhilodendron 'White Princess' Philodendron 'White Princess' is a variegated Philodendron with green leaves, clean white markings and pink to reddish colouring on the petioles, cataphylls or occasional leaf tissue. These pink accents add warm colour to the green and white variegation, especially around new growth. The plant grows from a climbing stem with relatively close leaf spacing while young. As it matures, the stem becomes more visible and can be

Philodendron 'White Princess'

Philodendron 'White Princess' is a variegated Philodendron with green leaves, clean white markings and pink to reddish colouring on the petioles, cataphylls or occasional leaf tissue. These pink accents add warm colour to the green-and-white variegation, especially around new growth.

The plant grows from a climbing stem with relatively close leaf spacing while young. As it matures, the stem becomes more visible and can be guided upward with a small pole or support.

  • Colour detail: Green and white leaves with pink or reddish accents on stems, petioles, cataphylls or occasional leaf areas.
  • Leaf form: Narrow to oval blades on a stem that stays closely spaced while young.
  • Growth habit: Climbing Philodendron with a visible stem as it gains size.
  • Pot size: Best in a modestly sized pot with drainage and a breathable aroid mix.

Pink accents and white variegation

Philodendron 'White Princess' is part of the white-variegated climbing Philodendron group in cultivation. Indoor care should focus on warmth, filtered light, airflow and an open root zone.

Pink colour on Philodendron 'White Princess' can appear on petioles, cataphylls and occasional leaf areas. Some leaves may stay mostly green and white, while the pink to reddish stem details remain visible around the newer growth points.

Care for pink-accented White Princess growth

  • Light: Give bright filtered light. Harsh direct sun can brown the white sections.
  • Potting: Use a pot that fits the root system closely, with drainage holes and no excess wet mix around the roots.
  • Watering: Let the upper layer of substrate dry before watering again. Constant dampness can weaken the roots.
  • Substrate: Choose a free-draining aroid mix with bark, perlite or pumice, plus some moisture-retentive organic matter.
  • Humidity: Moderate to higher humidity helps new leaves release from the cataphylls with fewer tears.
  • Temperature: Keep warm, ideally 18–28 °C, with protection from cold draughts and chilled wet substrate.
  • Pruning: Cut back weak, nearly all-white growth to a healthier node if the plant keeps producing very pale leaves.

Leaf symptoms and likely causes

  • Brown marks on white tissue: Check for direct sun, inconsistent watering or dry air around unfurling leaves.
  • Fading pink on older sheaths: Colour can soften as tissue matures; check overall growth, firm stems and healthy roots instead.
  • Yellowing with soft stems: Inspect the root ball and lower stem for excess moisture. Improve drainage and reduce watering frequency.
  • Torn new leaves: Check humidity stability and let new growth release naturally from the cataphyll.
  • Fine pale speckling: Inspect for mites or thrips, especially around new leaves and petiole bases.

One low-variegation leaf is not a problem, but a long run of weak, nearly colourless leaves should be cut back to stronger growth.

Safety

Philodendron 'White Princess' is not pet-safe. If eaten, its calcium oxalate crystals can irritate the mouth, tongue and throat and may cause drooling or discomfort. Keep the plant, pruned leaves and fresh cuttings out of reach of pets and children.

Philodendron name and pink-accented growth

Philodendron belongs to Araceae. The genus name comes from Greek words meaning “loving” and “tree”, matching the climbing habit of many species. Philodendron 'White Princess' has green-and-white variegated leaves with pink to reddish accents on petioles, cataphylls and occasional leaf areas.

Philodendron 'White Princess' has pink stem accents, narrower leaves and clean green-and-white variegation.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 3446720043

Discover Niche Categories That Outsell my white princess philodendron

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
New York, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Los Angeles, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Massapequa, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
Pawtucket, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Dallas, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products