SKU: 35096033058
baby stroller travel

baby stroller travel Bugaboo Butterfly 2 Stroller

$23.00 $25.56
Save 10%
No.2 Bestseller on virtipatel.com >

Pay in installments of $6.39 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

baby stroller travel Bugaboo Butterfly 2 StrollerThe Bugaboo Butterfly 2 Travel Stroller is expertly designed for modern parents who crave simplicity and mobility without sacrificing comfort for their growing baby. This ultra compact stroller folds in just one second into a sleek, portable form that fits overhead compartments on most airplanes, making it the ultimate companion for city errands and international adventures alike. With a roomy ergonomic seat and an intuitive one hand fold, the

The Bugaboo Butterfly 2 Travel Stroller is expertly designed for modern parents who crave simplicity and mobility without sacrificing comfort for their growing baby. This ultra-compact stroller folds in just one second into a sleek, portable form that fits overhead compartments on most airplanes, making it the ultimate companion for city errands and international adventures alike. With a roomy ergonomic seat and an intuitive one-hand fold, the Butterfly 2 offers freedom on the move and relaxation for your child from birth to four years.

Beyond its convenient fold, this innovative stroller offers multiple recline angles, a supportive footrest, full suspension, and large wheels to ensure a smooth ride over any terrain. It features a sun canopy with UPF 50+ protection, generous underseat storage, and a convenient seat-back pocket. Made with durable, PFAS-free water-repellent fabrics, bio-based materials, and recycled aluminum, it's Bugaboo's lowest CO₂-emitting stroller yet. As with all Bugaboo products, the Butterfly 2 is crafted with care, rigorously tested, and built to last—because every trip should be safe, sustainable, and joyful.

Bugaboo is a pioneering brand focused on designing high-quality strollers and baby products to support families on the move. Known for their innovative, stylish, and sustainable designs, Bugaboo strollers are crafted for comfort and ease of use, ideal for active parents. With a commitment to eco-friendly practices, they use recycled materials in their products, aiming to minimize environmental impact while delivering functionality and convenience. Bugaboo's products are designed to help parents explore the world effortlessly with their little ones. Explore Bugaboo at ANB Baby for premium strollers and accessories made for modern family life.

Bugaboo Butterfly 2 Travel Stroller Features

Ultra-Compact One-Second Fold

Folds in just one second for quick storage in overhead bins or tight spaces—ideal for travel. This ingenious mechanism transforms the stroller into a portable, durable package that fits perfectly in overhead airplane compartments. Simply press the fold button and watch it collapse into an incredibly compact size with no complicated steps or fumbling with straps.

Air Travel Ready & IATA-Compatible

IATA-compatible dimensions make it suitable as carry-on luggage on most airlines. Parents who frequently travel by air consistently praise the Butterfly 2 for fitting perfectly in overhead compartments. The one-second fold is a genuine game-changer for travel with young children.

Ergonomic Seat with Multiple Recline Positions

The spacious, softly padded seat reclines fully and upright, supporting infants through toddlers. The redesigned seat offers more space and comfort than the original Butterfly, with flatter recline angles that provide better support for growing babies. Your child can rest comfortably during naps or stay upright to take in new sights and surroundings.

Car Seat Compatible Travel System

Compatible with various infant car seats including the Bugaboo Turtle Air Shield by Nuna, using adapters (sold separately). This creates a seamless travel system that lets you move from car to stroller without waking your baby for a flexible, convenient solution.

Full Suspension & Large Wheels

Equipped with 5.5" front and 6" rear wheels and full suspension to absorb city bumps for a smooth ride. The enhanced wheel design provides better grip and resistance in various conditions, from smooth pavement to cobblestone streets. Navigate city streets effortlessly with improved maneuverability and stability on any terrain.

Sun Canopy with UPF 50+ Protection

Extendable sun canopy with peek-a-boo panel provides excellent sun protection and airflow. Superior protection for your child from harmful UV rays while maintaining ventilation and visibility.

Generous Storage Solutions

Underseat basket holds up to 17.6 lbs (8 kg) with an extra seat-back pocket for small essentials. No need to travel light—keep diapers, snacks, and personal items within easy reach wherever you go.

Sustainable & Eco-Conscious Design

Crafted using bio-based materials, recycled aluminum, and shipped with biofuels for a reduced carbon footprint. The Butterfly 2 represents a 37% reduction in CO₂ emissions compared to the original Butterfly model, making it Bugaboo's lowest environmental footprint stroller to date. Premium quality and environmental responsibility go hand-in-hand.

Durable & Rigorously Tested

Engineered to withstand over 2,485 miles of use, built to last well beyond industry safety standards. Every stroller is manufactured in an award-winning factory with safe and fair working conditions and tested beyond industry standards for superior durability and safety.

Stylish Vegan Leather Grips

Ergonomic, 100% vegan leather handlebar grips enhance control with a luxe touch. Premium materials throughout provide comfort and durability for years of use.

One-Hand Adjustable Footrest

Easily customize comfort as your child grows with intuitive one-hand adjustment. The improved footrest provides better support and customization compared to the original Butterfly model.

Why Choose the Bugaboo Butterfly 2?

  • Genuine one-second fold that works every time for busy parents
  • Perfect fit for overhead airplane compartments for frequent travelers
  • Lightweight at 8 kg (17.6 lbs) yet sturdy and stable for all terrains
  • Spacious, ergonomic seat with multiple recline positions for comfort
  • Smooth ride with full suspension and larger wheels for better handling
  • Ample storage both underseat and in backseat pocket for essentials
  • Easy to push and maneuver in city environments and crowded spaces
  • Sleek, modern design that complements any lifestyle
  • Environmentally conscious manufacturing and sustainable materials
  • PFAS-free water-repellent fabrics for easy cleaning and durability
  • 4-year warranty when purchased directly from Bugaboo.com
  • Tested beyond industry standards for safety and durability

Perfect For

The Bugaboo Butterfly 2 is ideal for frequent travelers, families with limited storage space, city dwellers who navigate public transportation, parents who value premium design and sustainability, anyone seeking a lightweight stroller without compromising comfort, multi-child families who need a flexible travel solution, and those planning extended family visits and vacations.

Shop related products: All Strollers | Bugaboo Collection | See Entire Bugaboo Collection

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 35096033058

Discover Niche Categories That Outsell baby stroller travel

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
hearmeout
San Leandro, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Omaha, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Massapequa, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Birmingham, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Massapequa, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products

All Natural Bug Spray
29.31
Curios Snail Stained Glass Plant Pot Decoration Orange
22.43
Anti Bug Spray - Outdoor 4 oz – US Organic
22.08
BONIDE 428 EIGHT Garden & Home Insect Killer 32 oz
27.90
Women's Grdening Gloves - Lightweight & Durable
25.48