SKU: 36717364116
britax marathon cow

britax marathon cow Britax Poplar S Convertible Car Seat Cowmooflage

$22.33 $24.81
Save 10%
No.2 Bestseller on virtipatel.com >

Pay in installments of $6.20 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 10 - Oct 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

britax marathon cow Britax Poplar S Convertible Car Seat CowmooflageReady to go with room to grow! The Poplar S convertible car seat takes the stress out of moving to the next car seat stage thanks to the patented ClickTight installation and slim SpaceSaver design. This convertible car seat accommodates up to 50 lbs when installed rear facing, allowing your child to ride rear facing longer. It easily switches to a forward facing car seat as your child grows, accommodating up to 65 lbs. ClickTight technology provides

Ready to go with room to grow! The Poplar® S convertible car seat takes the stress out of moving to the next car seat stage thanks to the patented ClickTight® installation and slim SpaceSaver™ design. This convertible car seat accommodates up to 50 lbs when installed rear-facing, allowing your child to ride rear-facing longer. It easily switches to a forward-facing car seat as your child grows, accommodating up to 65 lbs. ClickTight technology provides fully open seat belt paths that are clearly labeled and easy to access, and the automatic tensioner takes care of the tightening.

This baby car seat lets you easily adjust the 14-position no-rethread harness and headrest to help create the perfect fit. The removable infant insert helps to properly position infants 22 lbs and under. There are 2 additional premium inserts that help create refined comfort and a tailored fit. The ReboundReduce™ stability bar easily attaches to the car seat when installed rear-facing, helping to minimize movement in the event of a crash. Slim outside and spacious inside, this convertible car seat features 17-inch SpaceSaver™ technology designed to fit 3-across* without compromising on trusted Britax® safety and premium comfort. The rear-facing car seat includes a patented SafeCell® crumple zone and a V-shaped top tether to help manage crash energy. Carbon steel frame and belt paths provide strength and stability. The car seat cover fabrics are naturally flame-retardant with no added FR chemicals, and they’re safe to machine wash and dry time and again. *Britax cannot guarantee 3-across installation fitment in all vehicles

Recommendation – Britax strongly recommends:

Children ride rear-facing to the highest weight or height specified

Children should remain in a child seat with a 5-point harness until reaching the maximum weight or height allowed

The top tether be used at ALL times when installing the child restraint forward-facing.

Specifications

  • Product Dimensions: 20.5" x 17" x 23.5"
  • Harness Slot Heights: 8" - 17"
  • Buckle Strap Depths: 4" - 7"
  • Child Weight: 5-65 lbs
  • Rear-facing Harnessed Height: Less than 49"
  • Forward-facing Harnessed Height: Less than 49"
  • Rear-facing Harnessed Weight: 5-50 lbs
  • Forward-facing Harnessed Weight: 30-65 lbs
  • Seat Area Depth/Width: 11" / 12"
  • Shoulder Width: 14"
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36717364116

Discover Niche Categories That Outsell britax marathon cow

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 27 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Joseph E. Brackman
Omaha, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Boise, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Boise, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
G
Verified Purchase
Gigi
Alexandria, US
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
R
Verified Purchase
Ronald D Smith Jr
Port Orchard, US
★★★★★ 5
Perfect
Size: 16 Inch
Exactly what I ordered, took just a few minutes to assemble and mount the legs. Love that the bottoms can be manipulated to give a balanced stance.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2026

recommand products

Martin's Eraser Weed & Grass Killer Non-Selective Post-Emergent Herbic — HomeandGardenSupply.com
23.60
Anthurium (Forgetii x Red Crystal) x (SKG Pink Lemonade x Red Crystal) – HappiestPlants
27.73
Anthurium 'Crystal Mag'
23.39
Anthurium Amalia Elegans | Care Guide and Pro Tips - Delivery from Toronto across Canada
22.71
Anthurium (SKG Pink Lemonade x Papillilaminum (long x long bullate)) x – crystallinum & co
28.75