SKU: 37353211144
anthurium waterburyanum

anthurium waterburyanum Anthurium warocqueanum × waterburyanum – Hybrid Queen-Type Velvet

Sale price$19.82 Regular price$22.02
Save 10%

Pay in installments of $5.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

anthurium waterburyanum Anthurium warocqueanum × waterburyanum – Hybrid Queen-Type VelvetAnthurium warocqueanum waterburyanum Long, narrow velvet leaves shape Anthurium warocqueanum waterburyanum from the start. The blades develop a deep green surface, pale venation and a hanging growth direction that needs open space around and below the pot. The cross combines the elongated foliage associated with Anthurium warocqueanum with the Ecuadorian Anthurium waterburyanum parent. Indoors, the plant should sit where new blades can open and harden

Anthurium warocqueanum × waterburyanum

Long, narrow velvet leaves shape Anthurium warocqueanum × waterburyanum from the start. The blades develop a deep green surface, pale venation and a hanging growth direction that needs open space around and below the pot.

The cross combines the elongated foliage associated with Anthurium warocqueanum with the Ecuadorian Anthurium waterburyanum parent. Indoors, the plant should sit where new blades can open and harden without pressing against shelves, glass or nearby pots.

Long velvet leaf features

  • Elongated foliage: The leaves have a narrow, hanging shape with a soft velvet surface.
  • Pale vein pattern: Light veins run through the blade and become clearer as the leaf matures.
  • Downward leaf movement: The leaves need room below and around the pot as they lengthen.
  • Soft expanding blades: New leaves can crease or mark if they touch hard surfaces while unfurling.
  • Epiphytic root behaviour: Thick roots need a loose, airy substrate with steady but never stagnant moisture.
  • Space-sensitive growth: Open placement helps the long leaves expand without rubbing or folding against nearby surfaces.

Long-leaf growth and indoor placement

The leaf shape makes placement important. A shelf edge, plant stand or open bench can give the blades space to extend as they grow. If new leaves press against a wall or neighbouring plant, the soft velvet surface may crease before it has hardened.

The root zone should be open and oxygen-rich, similar to other velvet Anthurium with epiphytic tendencies. A heavy, compact mix keeps too much water around the roots and can weaken the crown before leaf symptoms become obvious.

Care for Anthurium warocqueanum × waterburyanum

  • Placement: Give the leaves physical space below the pot and avoid narrow shelves where new blades can press against hard surfaces.
  • Substrate: Choose a chunky Anthurium mix with bark, coarse mineral material and fibres that prevent the root zone from compacting.
  • Humidity: Higher humidity helps long new leaves unfurl without sticking, tearing or drying at the edges.
  • Water: Keep the substrate evenly moist but airy, with a slight dry-down at the top before the next watering.
  • Light: Use bright filtered light. Direct sun can scorch long velvet leaves and dry the tips.
  • Temperature: Keep the plant warm and protect it from cold drafts, cold water and cold wet substrate.
  • Feeding: Feed lightly during active growth and keep the root zone flushed if salts collect in the mix.

Problems with long velvet leaves

  • Creased new leaves: Long soft blades can crease if they rub against shelving, glass or other plants during expansion.
  • Brown tips and margins: Dry air, irregular moisture or root stress can brown the edges of the elongated leaves.
  • Loose crown: A wobbling base can point to root loss in a dense or overly wet mix.
  • Scorch marks: Strong sun can leave pale dry patches on the velvet surface.
  • Pests: Thrips, spider mites and mealybugs can hide along the midrib, petioles and undersides of long leaves.

Safety for Anthurium warocqueanum × waterburyanum

Anthurium is not safe for pets or children to chew. The plant contains calcium oxalate crystals, which can irritate the mouth, throat, skin and eyes after contact with sap or damaged tissue.

Botanical name background

The genus name Anthurium comes from Greek roots for “flower” and “tail”, referring to the spadix. Anthurium warocqueanum T.Moore was published in Florist and Pomologist in 1878 and is a Colombian epiphytic species.

Anthurium waterburyanum Croat & Scherber. was published in Aroideana 48(3):255 in 2025, in a revision of Anthurium section Cardiolonchium from Carchi Province, Ecuador.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 37353211144

Discover Niche Categories That Outsell anthurium waterburyanum

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
James Tepper
Natrona Heights, US
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so. For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes. But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices. I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround. Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them. It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet. This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could. JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
B
Verified Purchase
Brian M.
Draper, US
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr. Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy. Update: Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025
A
Verified Purchase
Amazon Customer
Cuba, US
★★★★★ 5
Great for UTV rear light install!
Size: 16AWG -10FT 2Pin DT
I had a set of 3” Nilight pod lights with wiring harness to install as rear lights on my Ranger 570 SP. The Nilight harness with relay was great! But it was too short to keep the relay and fuse in the front compartment on the pulse panel. These were the perfect solution! The extensions are plugged in under the tunnel to each of the individual light leads from the Nilight harness. And there was just enough length to run behind the seat back, up the driver side roll bar, and to each light. (Had about 1’ too much for passenger side light, so should be fine for full-size Ranger too.) Now have a weatherproof, factory quality installation with no splices or solder joints. The only mods I had to make for the entire install (not related to these extension cables) were: 1) Cutting the ring lugs off and adding waterproof heat shrink butt splices to Polaris pulse plug, and 2) Buying a factory-style Carling L1 illuminated switch to replace the round switch provided. (This is a direct plug and play too since the Nilight switch wiring has 1/4” faston connectors.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2024
M
Verified Purchase
Marshall Quinn
Charlottesville, US
★★★★★ 5
Exactly what I needed
Size: 16AWG -10FT 2Pin DT
This was perfect for me. I had two lights bars in my rear bumper and needed to extend the harness to my fuse block. Great value
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 19, 2026
C
Verified Purchase
Charles G
Phoenix, US
★★★★★ 5
10 foot long
Size: 16AWG -10FT 2Pin DT
Worked great. Plugged in with no problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026

recommand products