SKU: 39276203201
cybex eos

cybex eos CYBEX EOS Luxury Travel System CLOUD T I-SIZE with Gold Footmuff

$20.86 $23.18
Save 10%
No.2 Bestseller on virtipatel.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

cybex eos CYBEX EOS Luxury Travel System CLOUD T I-SIZE with Gold FootmuffPlease note: this item is not stocked in store and will be delivered in 3 5 working days. A 2 in 1 stroller with interchangeable cot and seat attachments, helping you keep your child supported in the best way from birth up to four years old. Features: The 2 in 1 Stroller Meet the 2 in 1 stroller made for every day with your little one. The Eos Lux makes life easier, so you can relax and enjoy every moment. The Eos Lux stroller changes as your baby

Please note: this item is not stocked in store and will be delivered in 3-5 working days.

A 2-in-1 stroller with interchangeable cot and seat attachments, helping you keep your child supported in the best way from birth up to four years old.

Features:

The 2-in-1 Stroller

Meet the 2-in-1 stroller made for every day with your little one. The Eos Lux makes life easier, so you can relax and enjoy every moment.

The Eos Lux stroller changes as your baby grows. Start off with a cot attachment, for comfort and shelter from birth. When your child starts sitting up, the cot can be transformed into a seat by swapping the fabric components on the frame, promising comfortable rides until they're four years old. The travel system allows a smooth switch from the car to the outside world. And large all-terrain wheels and front-wheel suspension make short work of bumpy ground. The Eos Lux: The 2-in-1 Stroller.

2-in-1: Cot to Seat

All you need for their first four years. First, your newborn can lie comfortably in a cot. Then when they grow big enough to sit upright, simply switch to seat mode by swapping the fabric parts on the frame.

Travel System Ready

One frame, three ways to ride. In addition to the cot and seat unit, you can attach an award-winning CYBEX infant car seat to the stroller frame. So you can take your little one from drive to stroll without waking them up.

All-Terrain Wheels

Puncture-proof tires and lockable front wheels deliver stability and smooth rides. Enjoy your stroll wherever you are - whether you're walking cobbled streets or on a family trip in the great outdoors.

Front Wheel Suspension

Keep the ride smooth for your sleeping baby, with front wheel suspension that minimizes shocks and shakes. Sand, grass or gravel paths - it can handle any off-road adventure.

One-hand Recline

When your child needs a rest, simply lower the backrest with one hand. Recline it fully for a comfortable ergonomic position for your child.

XXL Sun Canopy with Mesh Insert

Protect your child from outdoor weather with an XXL UPF50+ sun canopy. A mesh window lets cooling air flow freely.

Reversible Seat

Face your child towards you to share a happy moment, or face them forwards when they want to explore the world ahead. And if your child changes their mind, switching back around takes just a moment.

Spacious Shopping Basket

Carry up to 5 kg of whatever you and your baby need. Snacks, changing bags or groceries - this roomy basket can carry it all.

Adjustable Handlebar

A stroller has to be comfortable for the parent, too. Adjust the handlebar to your height to maintain proper posture, helping you maneuver the stroller like a pro.

Compatible with:

  • CYBEX infant car seats
  • Eos Lux Car Seat Adapter
  • Eos Lux Rain Cover
  • Gold Footmuff
  • Snogga 2
  • Summer Seat Liner
  • Snack Tray
  • Strollers Cup Holder
  • 2-in-1 Cup Holder

Specifications:

  • Age range: From birth to approx. 4 years
  • Child weight: Max. 22 kg

Unfolded Dimension

  • Length: 850 - 950 mm
  • Width: 610 mm
  • Height: 1160 mm
  • Weight: 11.6 kg

Folded Dimension:

  • Length: 400 mm
  • Width: 510 mm
  • Height: 920 mm
  • Weight: 11.6 kg

Included

  • Eos Lux frame including wheels
  • Convertible cot to seat unit
  • Cot S Lux
  • Optional CYBEX Gold Footmuff
  • 1x CYBEX Cloud T i-Size + Cloud T Base
  • Cot S Lux Raincover
  • Cot S Adaptor
  • Shopping basket
  • Bumper bar
  • Sun canopy
  • User guide
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 39276203201

Discover Niche Categories That Outsell cybex eos

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 1623 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Janeee
New York, US
★★★★★ 5
Fantastic speaker plug at a great price!
Size: 5 Pack, Pattern Name: Banana Plugs
This is a product that gets the job done effectively, and at a good price. Banana plugs are used to clean up speaker wire - you can generally screw in speaker wire, but banana plugs provide a nice interface that allows you to plug in and remove speaker wire as needed. These closed plugs do a good job terminating / hiding the wire. They fit very well into various components and amps that I own. INSTRUCTIONS to install / use them: * Remove around 1" - 2" of the white casing to expose the red and white individual speaker wires * Strip each wire so ~1/2" metal is showing * Make sure the plug end is screwed in tightly (this does not need to come out) * Unscrew the base of the plug from the other end * WithOUT twisting the metal wiring, insert the wire (match wire color with plug color; start with either one) from the bottom of the plug until the metal sticks out the top * Have ~1/4" metal hanging past the plug * take the wiring and drape it down the sides of the plug (just the smooth side, do NOT cover any of the screw threading or it will be very hard to close it) * Spread the draped wiring around the plug as evenly as possible (makes it easier to screw in later) * Screw the two ends of the plug back together (the side with the draped wiring will go inside the plug) * If you get stuck while screwing it back in, unscrew and adjust the wiring * Repeat for the other side, and you're done!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2019
L
Verified Purchase
L. Yu
Cuba, US
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR. alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed. what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action. i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure. i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there. i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better. anyway they seem constructed well - easy enough to install and they do work. thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
A
Verified Purchase
AB
Natrona Heights, US
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
W
Verified Purchase
William
Birmingham, US
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
L
Verified Purchase
Leyland Cypress
Lowell, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012

recommand products

VECELO 65" Tall Plant Stand Indoor with Grow Lights
22.83
Rattan Indoor Plant Stand, Small, Natural
25.01
Swiveling Tiered Plant Stand
21.22
Plant Stand – Black Metal with Enamel Design – 14-inches
23.34
Buy Dwarf Jade Miniature Pre-Bonsai Trees
27.16