Pay in installments of $7.22 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 16 - Jul 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
shiny snake plant MoonshineDracaena (Sansevieria) trifasciata 'Moonshine' Dracaena trifasciata 'Moonshine' is a light toned snake plant with broad, upright leaves and a soft grey green surface. The leaves rise from the base in firm, lance shaped fans, with faint horizontal markings and a narrow darker edge. Its colour gives the plant a calm appearance while keeping the strong structure of a snake plant. This cultivar has light grey green foliage on firm vertical leaves. The
Dracaena (Sansevieria) trifasciata 'Moonshine'
Dracaena trifasciata 'Moonshine' is a light-toned snake plant with broad, upright leaves and a soft grey-green surface. The leaves rise from the base in firm, lance-shaped fans, with faint horizontal markings and a narrow darker edge. Its colour gives the plant a calm appearance while keeping the strong structure of a snake plant.
This cultivar has light grey-green foliage on firm vertical leaves. The smooth surface catches light in simple pots, while growth comes from a rhizome below the substrate. New leaves appear from the base and slowly increase the density of the clump.
Light leaves with a fine green edge
- Leaf colour: Light grey-green blades give the plant a cool, bright look.
- Leaf edge: A fine dark green margin outlines the leaves and sharpens the light-toned foliage.
- Growth base: New leaves rise from the rhizome and slowly fill the pot.
- Indoor shape: Upright, lance-shaped leaves give height from a compact base.
- Flowering: Mature plants may occasionally produce pale, fragrant flower spikes in settled indoor conditions.
How Moonshine grows in a pot
Dracaena trifasciata is native from southern Nigeria to western Central Tropical Africa and Tanzania, where it grows in seasonally dry tropical conditions. Its firm leaves store water, while the rhizome needs a clear drying phase between waterings. Air around the rhizome is especially important after watering in cooler indoor conditions.
'Moonshine' keeps the firm sword-leaf form of the species, while the light foliage makes dust, splash marks and handling damage easier to notice. New leaves may emerge very light and then settle into a cooler grey-green tone as they mature. In bright indirect light, the leaves usually stay firm and evenly coloured.
The plant usually grows slowly indoors. A snug, stable pot is appropriate because the rhizome does not need a large volume of damp mix around it. When several new shoots have filled the pot or the container begins to deform, move it into a slightly larger pot with fresh, open substrate.
Care for light grey-green foliage
- Light: In bright indirect light, leaves stay firm and the grey-green colour remains clear. In dimmer rooms, growth slows and the pot dries more gradually.
- Watering: Water after the mix has dried deeply. Soak evenly, drain fully and let the lower pot dry again before repeating.
- Substrate: A free-draining mix with pumice, lava rock, coarse sand or fine bark keeps the rhizome aerated after watering.
- Pot choice: Choose a pot with drainage holes and enough weight to balance the leaves. Empty decorative cover pots after watering.
- Temperature: Keep it in steady indoor warmth, ideally around 18–27 °C. The root zone should stay warm after watering.
- Humidity: Average household humidity is enough. Normal room air is adequate for this cultivar.
- Feeding: Feed lightly during active growth with a diluted balanced or cactus fertiliser. Slow rhizome-based growth needs modest nutrition.
- Repotting: Repot when the plant has filled the container or the substrate has lost structure. Increase pot size carefully so the new mix dries predictably.
- Propagation: Divide rooted clumps to keep the light cultivar look consistent. Leaf cuttings can root and may produce growth that does not match the parent plant.
Marks and stress on light leaves
- Soft bases: Inspect the substrate line, rhizome area and cover pot. Soft tissue near the base usually means the lower plant stayed wet too long.
- Wrinkled leaves: Check the root system as well as dryness. Root damage can make leaves wrinkle even when the pot has been watered.
- Brown tips or edges: Review watering consistency, mineral buildup, old knocks and temperature dips. Trim only dry tissue if needed.
- Marked foliage: Wipe leaves gently with a soft damp cloth. The light surface shows dust and water spots quickly.
- Weak new growth: Move the plant closer to bright filtered light and check that the pot size matches the root system.
Placement around pets
Keep Dracaena trifasciata 'Moonshine' away from pets and small children who may chew the leaves. Snake plants contain saponins, which can cause nausea, vomiting or diarrhoea in cats and dogs if ingested. A raised, stable position also helps keep the light leaves free from knocks and bite marks.
The name behind Dracaena trifasciata
The accepted botanical name for the species is Dracaena trifasciata, while Sansevieria trifasciata remains the older name still widely used in houseplant retail and care information. The genus name Dracaena comes from the Greek drakaina, meaning “female dragon”, historically linked to red resin in some dragon tree relatives. The species epithet trifasciata means “three-banded” or “marked with three bands”, referring to the banded foliage pattern associated with the species.
Dracaena trifasciata 'Moonshine' has soft grey-green leaves, faint markings and slow basal growth in an upright clump.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 13 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Good product, poor directions.
Color: Black, Size: B-88''W-4 Panel
The quality of the product was better than most at this price. The directions could have been much better even though I have an engineering background.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 1, 2025
★★★★★ 4
Nice partition for my basement
Color: Beige, Size: B-102''-3 Panel
This 3-panel room divider showed up well-packaged with all the parts and even a little tool for putting it together. The instructions were easy to follow, and while one person can definitely assemble it, having two makes it quicker and less frustrating.
It does exactly what I needed—gives quick, easy coverage in an open area. I'm using it in my basement to hide the furnace and water heater, and it works great for that. It looks nice overall, but I picked the beige fabric (which is really more of a tan), and the black frame makes it stand out more than I’d like. A white or lighter frame would’ve blended better. Not sure that I would use it anywhere besides the basement
It’s lightweight and pretty sturdy. The wheels make it easy to move, but it does get a bit wobbly, and the panel clips need to be readjusted every time you roll it somewhere new. Still, for the price, it’s a solid buy. I’m happy with it and planning to order another one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2025
★★★★★ 5
Fantastic
Color: Beige, Size: A-132''W-6 Panel
I am perennially in the process of rearranging, reorganizing, getting ready for yard sales, changing the functions of various rooms, moving everything out of a room to do a deep clean, etc, which means that there is always SOME part of my house, if not the entire thing, that is a disaster zone. Having someone knock on my door triggers a "duck and cover" reflex because it's so embarrassing for anyone to see that I live like this. (I *feel* like I don't, really, because I know that all the various stages are all temporary, but when there's always something temporary going on, it might as well be permanent, you know?)
So THANK HEAVENS for a room divider that is not only large enough to divide my uncomfortably long den in half the long way so I can shove all the messy parts up against the back wall -- that is not only simple and attractive and neutral and (this is important) NOT BLACK because I have multiple pets and anything black in this house will be pet-hair-colored within 20 seconds -- that not only has **SIX** panels for lots of options of how I want to divide the space/s -- but is also on WHEELS.
Someone out there really does love me, it's true!
The panels are stable *enough* - I'm not going to lie and say that nothing is going to knock them over, because I have some balance issues, and I also have cats, and both of those circumstances has resulted in a mess on at least one occasion. But in the cats' defense, they've never dealt with a room partition that didn't hang from the ceiling before; and in my defense, I just grabbed the first thing I could reach on the way down. Not the product's fault in either case.
Assembly was a little dicey as I am currently in **bilateral** (oh yes, that's fun) wrist braces, so I had to give up until I had help. But I think if you're able-bodied, you shouldn't have any difficulty.
The only down side is, now that I've hidden away all the mess so I can break out the holiday decorations, you know what happens next, right?? That's right... the PERMA-MESS ZONE. Oh no.
Oh well.
Full item name: Room Divider 132''W Wall Divider for Room Partition (Heavy Duty Base) 6 Panel Partition Room Dividers, Freestanding Room Divider Screen Separation W/Wheel Folding Privacy Screen Panel Space Separator
(six panels, beige)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 1, 2025
★★★★★ 3
Difficult assembly, doesn’t fold well, looks good fully open
Color: Grey, Size: B-88''W-4 Panel
The instructions for this divider are very inadequate. After having to redo parts of the assembly, I have finally assembled it. The divider itself seems very nice when it is fully open, however it is not possible to fold it well as all the bars with the wheels go in various directions making it impossible to fold it neatly. And it has a large footprint. It is possible that I did not assemble it fully well because of the lack of adequate instructions. I am not even sure if I will keep it because I need to fold out of the way when nothing in use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026