SKU: 44818387075
micro terrarium plants

micro terrarium plants Enclosed Paludarium Terrarium Micro Terrarium BIOLOARK MY-120H -150H MY-150H

$24.78 $27.53
Save 10%
No.2 Bestseller on virtipatel.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

micro terrarium plants Enclosed Paludarium Terrarium Micro Terrarium BIOLOARK MY-120H -150H MY-150HThese versatile microclimate enclosures are perfect for terrarium and mossarium scapes, offering a wide range of planting options for both aquatic and land dwelling plants. The MY series cup has a unique design with a curved top that allows water vapour to collect and fall down as droplets, which helps the plants grow well with less watering. Air holes on the side of the container ensure proper air circulation even when the lid is closed, as well as

These versatile microclimate enclosures are perfect for terrarium and mossarium scapes, offering a wide range of planting options for both aquatic and land-dwelling plants.

The MY-series cup has a unique design with a curved top that allows water vapour to collect and fall down as droplets, which helps the plants grow well with less watering.

Air holes on the side of the container ensure proper air circulation even when the lid is closed, as well as the inside of the container maintaining an appropriate humidity level for humidity-loving plants.

Combine with the DX03 LED Terrarium Lamp which not only provides warm and natural daylight-like illumination for optimal plant growth but also transforms your living or working space with a pleasant ambience. With variable air slits and additional fans for cooling, these terrariums ensure easy ventilation and an extended LED lifespan of up to 30,000 hours.  

NOTE: Plants or contents not included.

This item must be shipped by sea due to its size and weight, with an expected delivery time of up to 35 days. An express shipping option is available. Please email or message us for pricing.

Key Features and Important Notes:

  • Size: MY-120H - 12cm x 17.5cm (L*H). - 1.9 Litre.
  • Size: MY-150H - 15cm x 23.5cm (L*H). - 4.1 Litre.
  • Versatile container suitable for use as a terrarium or mini mossarium.
  • Allows for easy watering of plants through a small hole in the lid
  • To support the growth of plants and avoid too much moisture accumulation, the jar includes ventilation holes.
  • Ideal for growing plants that require high humidity levels
  • Offers adequate gas exchange through small holes in the upper part of the glass container body
  • Provides a unique and visually appealing option for plant enthusiasts and hobbyists
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 44818387075

Discover Niche Categories That Outsell micro terrarium plants

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 602 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
JBDoge
Phoenix, US
★★★★★ 5
Wish they came with instructions...
They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers. I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part. Here are my instructions for installation: 1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring). 2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down 3) Strip your wire tips to 3/8 of an inch (or just slightly under) 4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end. 5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole. 6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug. 7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand. If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it. UPDATE: I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together... GET THESE!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2012
R
Verified Purchase
R. Jackson
Bozeman, US
★★★★★ 1
'Monoprice' = Worst stereo banana plugs on T-H-E market.
Size: 5 Pack, Pattern Name: Banana Plugs
The absolute WORST in stereo banana plugs - HANDS DOWN. After installing stereos and components for over 30 years, I'd say I'm experienced. These banana plugs fail at EVERY part of the design. Allow me to explain... 1) Starting with the tips, they are loose off the bat and fit LOOSELY in either the stereo input studs or speaker input studs by their 'girth'. They do not firmly seat in any plug and for this setup, I'm using a nearly $2K setup all together. They 'rock' back and forth (when inserted) and thus create a non-permanent connection, again, seriously making these utter junk. I've seen some items you can get by with over the years, but these aren't even rock bottom. They are unusable! 2) Next, the banana plugs themselves comes as three pieces. No non loosening o-ring seal but a plastic colored want-to-be imitation for positive and negative notation. Why do these stupid things come in three pieces? - I simply can't tell you why. I do know they serve no specific piece to solving the puzzle of installation so why do they come in three pieces...? My speculation is they are cheap china knockoffs. 3) The 'way' in which you normally install the trimmed wiring internally with the 'two-piece' design permits you to firmly CRIMP and hold the unsheathed wiring; but these do not. The overlap/overlay of the exposed wiring can only be about 2/16's of an inch thus not much to create a proper connection with. This single fact eliminates these plugs as even worthwhile component add ons; period. If you can't achieve a good ground/wiring connection, these are a defeated purpose... 4) Because of the design of these, they have no room to crimp and screw on the cable so your forced to nearly break your fingers in an attempt to get the unsheathed wire to overlay the internal threading and twist them on with all your might. This in effect breaks nearly every wire thread internally and then they breaks off inside. Absolute garbage. These are total pieces of non-quality junk that did nothing but makes me waste 30 minutes on attempting to get them securely on and another 25 to locate my Amazon account, find this product in my order and ALARM anyone else from making the same mistake I made. Now, I find out I can't even get a return on these. Thanks Amazon. Thank you third party retailer. You just made me a very dissatisfied decade long customer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 17, 2016
A
Verified Purchase
Amazon Customer
Phoenix, US
★★★★★ 5
Nice quality
Had to return due to our mistake but the mechanic said it was good quality. Ordered the correct size and worked great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2025
K
Verified Purchase
katelyn traut
Belleville, US
★★★★★ 5
Perfect fit
Worked great for a 1965 mercury thunderbolt 150hp
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2025
L
Verified Purchase
Lawrence Brown
New York, US
★★★★★ 5
MerCruiser Replacement Parts
OEM quality MerCruiser Alpha 1 Gen1 replacement part. Everything you need and some things you don't because it's a universal kit that works for several models.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 19, 2025

recommand products

Rubber Tree Ring 3 Pack — Material Warehouse
29.65
Hardy Rubber Tree – Flora Fauna Farm
21.02
Pray for Us
25.46
Ctenanthe setosa 'Silver Star' 10"
28.98
36" Rubber Tree Ring
26.63