Pay in installments of $5.79 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 21 - Oct 26
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
clek liing car seat stroller compatibility Clek Liing Infant Car SeatLiing sets a new standard for infant car seat safety with a simple, secure installation in every seating position. Designed to protect from day one, it features an energy absorbing metal load leg, a two piece shell with EPP foam for enhanced side impact protection, and Cleks rigid LATCH base with up to seven recline positions, adjustable after installation to support safe, open airways. At under 17 inches wide, Liings narrow profile makes 3 across
Liing sets a new standard for infant car seat safety with a simple, secure installation in every seating position. Designed to protect from day one, it features an energy-absorbing metal load leg, a two-piece shell with EPP foam for enhanced side-impact protection, and Clek’s rigid-LATCH base with up to seven recline positions, adjustable after installation to support safe, open airways.
At under 17 inches wide, Liing’s narrow profile makes 3-across seating possible without compromising safety. The lightweight design, one-handed quick release, and zip-off, machine-washable fabric make everyday use effortless—whether transferring from base to stroller or keeping things clean.
All Liing models are free of brominated and chlorinated flame retardants; the Mammoth collection contains no added flame retardants. Liing is proudly designed, engineered, and made in Ontario.
Liing Features: (features-in priority)
- The adjustable metal load leg provides anti-rotation and energy-absorbing features, which reduce crash forces by up to 40%.
- The rigid-LATCH system provides an effortless, secure installation using your vehicle’s built-in LATCH anchors.
- The belt-tensioning system provides an easy seat belt installation method that feels every bit as secure when installing in seating positions where LATCH is unavailable.
- The recline angle is easy to adjust as your child grows, without having to uninstall the base! With up to 7 recline positions and a trusty bubble indicator, you can ensure your baby is at the proper angle every time – regardless of how flat or sloped your vehicle seat is.
- Designed with a European belt path, the carrier can be securely installed in a vehicle or aircraft without the base.
- The 2-piece energy-absorbing EPP-lined shell provides maximum side-impact protection and cooling air circulation.
- Compatible with many of the top strollers you love, when using the correct adapters.
- The 3-position, SPF 100+ adjustable sun canopy provides almost full coverage from the sun, with a mesh peekaboo window for airflow and visibility into the car seat.
- Designed with an easy-to-remove and washable cover because life happens.
- Additional Information:
- 3-across seating is possible.
- 9-year expiration
- Recyclable through Clek's Car Seat Recycling Program
- Conforms to all applicable Federal Motor Vehicle Safety Standards.
- Certified for use in aircraft
- Made in Canada (using domestic and imported components).
Dimensions (L x W x H):
- Product dimensions/weight – 27.75 in. x 16.9 in. x 27 in. - 27 lb
- Packaging dimensions/weight – 31 in. x 20 in. x 18 in. 36 lb.
Included in the box:
Manual and base
Liing Stroller Compatibility:
- Baby Jogger City Mini, City Mini GT, City Select, City Select LUX
- Babyzen YOYO2
- Stokke YOYO3
- Bugaboo Bee, Butterfly, Ant, Donkey, Fox, Lynx
- Bumbleride Era, Indie, Indie Twin, Speed
- Joolz Geo, Hub, Aer2
- Stokke Scoot, Trailz, Xplory
- UPPAbaby Cruz, Minu, Vista
- Thule Urban Glide, Sleek
- Silver Cross - all
- Peg Perego YPSI, Agio Z4
- BOB Revolution Flex 3.0, Allterrain
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 9 reviews
Sort
Product Reviews
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound.
By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.
You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).
I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.
So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.
If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before.
I originally did all the above myself, so that's my experience and so your mileage may vary.
I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.
I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.
WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.
Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Essential Tool for Effective Sound Deadening Installation
The Car Sound Deadening Roller Metal Installation Tool is a must-have for anyone looking to enhance their vehicle's acoustics. Designed to aid in the application of soundproofing materials, this roller ensures a smooth and efficient installation process.
Key Features:
Ergonomic Design: The tool features a comfortable handle that allows for extended use without causing hand fatigue.
Durable Construction: Made with high-quality materials, it withstands the pressures of installation, ensuring longevity.
Efficient Application: The roller helps in evenly pressing sound deadening materials onto surfaces, reducing air bubbles and ensuring a tight bond.
Whether you're a DIY enthusiast or a professional, this tool simplifies the soundproofing process, leading to a quieter and more comfortable ride.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2025
★★★★★ 5
Great Quality and Easy to Use
This sound deadening roller set is a must-have for installing car insulation materials The metal wheels are durable and roll smoothly making it easy to apply pressure for a strong bond The different sizes are perfect for working in tight spaces and larger areas ensuring a professional finish
The ergonomic handles provide a comfortable grip and allow better control during installation The rollers apply even pressure without damaging the material making the process much faster and more efficient
This product offers great value for money excellent functionality and is easy to use If you are installing sound deadening material in your car this set is a great choice Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2025