SKU: 60884754665
dark form pothos

dark form pothos 20

Sale price$22.30 Regular price$24.78
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

dark form pothos 20Scindapsus treubii Dark Form is a rare and sophisticated tropical aroid adored for its velvety, near black foliage and understated elegance. A member of the Araceae family and native to the humid rainforests of Southeast Asia, this collectors favourite combines depth, texture, and minimalism in one striking plant. The leaves are thick, leathery, and deeply glossy, with a dark green hue that often appears almost black in soft light. The smooth surface

Scindapsus treubii ‘Dark Form’ is a rare and sophisticated tropical aroid adored for its velvety, near-black foliage and understated elegance. A member of the Araceae family and native to the humid rainforests of Southeast Asia, this collector’s favourite combines depth, texture, and minimalism in one striking plant.

The leaves are thick, leathery, and deeply glossy, with a dark green hue that often appears almost black in soft light. The smooth surface reflects a subtle metallic sheen, enhancing its luxurious, sculptural appearance. Its growth habit is compact and upright when young, later trailing or climbing as it matures — making it ideal for shelves, hanging planters, or moss poles.

Moody, resilient, and undeniably refined, Scindapsus treubii ‘Dark Form’ embodies modern tropical design — a plant that exudes quiet luxury and timeless appeal.


Scindapsus treubii ‘Dark Form’ – Care Guide

Light

Thrives in bright, indirect light, but its dark leaves tolerate lower light levels better than most tropicals. However, for steady growth and leaf size, provide consistent filtered brightness. Avoid direct sunlight, which can scorch the leaves or cause dull patches on their glossy surface.

Watering

Allow the top 3–4 cm of soil to dry out between waterings. Water thoroughly, then let excess drain away. Overwatering is the most common issue — Scindapsus species prefer to dry slightly before being watered again. In winter, reduce watering frequency.

Temperature and Humidity

  • Temperature: Prefers warmth between 20–30 °C; avoid temperatures below 15 °C.

  • Humidity: Enjoys moderate to high humidity (50–80%). While tolerant of average indoor conditions, higher humidity encourages lush growth and prevents crisp leaf edges. Mist occasionally or place near a humidifier for best results.

Soil and Potting

Use a well-draining, airy mix, such as compost blended with orchid bark, perlite, and coco coir. This provides excellent airflow and prevents the roots from staying too wet. Repot every 1–2 years in spring to refresh the substrate and allow for steady root expansion.

Feeding

Feed every 4–6 weeks during the growing season with a diluted, balanced liquid fertiliser or an aroid-specific formula. Over-fertilising can lead to salt build-up and leaf damage, so feed sparingly and consistently. Suspend feeding during the cooler months.

Pruning and Maintenance

Prune lightly to manage size or remove any older or damaged leaves. The plant can be trained to climb a moss pole or trellis for larger leaves or left to trail gracefully from a high planter. Wipe leaves occasionally with a damp, soft cloth to remove dust and accentuate their deep, glossy sheen.

Growth and Maturity

A slow to moderate grower, Scindapsus treubii ‘Dark Form’ typically reaches 60–90 cm in length indoors. Its compact growth habit makes it perfect for small spaces, while mature climbing plants develop larger, more elongated leaves with a leathery texture. Over time, it creates a rich, shadowy display that contrasts beautifully against lighter plants.

Common Issues

  • Yellowing leaves: Overwatering or poor drainage.

  • Faded colour: Insufficient light.

  • Brown edges: Low humidity or inconsistent watering.

  • Pests: Occasionally mealybugs or thrips; treat promptly with neem oil or insecticidal soap.


Background and Benefits

Native to the tropical rainforests of Borneo and Malaysia, Scindapsus treubii is an epiphytic vine that naturally climbs trees under the shaded forest canopy. The ‘Dark Form’ cultivar is celebrated for its velvety black-green leaves and elegant simplicity, making it a staple in rare plant collections and modern interior design.

In cultivation, this variety is valued for its resilience, tolerance to varying light levels, and ability to thrive with minimal attention. Like other Scindapsus species, it also functions as a natural air purifier, helping to remove airborne toxins while bringing a calming, moody elegance to indoor environments.


Quick Care Summary

Light: Bright, indirect light; tolerates low light
Water: Allow top 3–4 cm of soil to dry between watering
Temperature: 20–30 °C; avoid below 15 °C
Humidity: Moderate to high (50–80%)
Soil: Airy, well-draining mix – compost, bark, perlite, coir
Feed: Every 4–6 weeks in spring/summer
Growth: Climbing or trailing habit, 60–90 cm; thick, glossy dark green to near-black leaves

⚠️ Toxicity note: Contains calcium oxalate crystals and is toxic if ingested. Keep away from pets and children.


Styling Tip

Display Scindapsus treubii ‘Dark Form’ in a matte black, charcoal, or stone-toned planter to enhance its dark, moody elegance. It pairs beautifully with lighter tropicals such as Philodendron ‘Birkin’ or silvery species like Scindapsus pictus ‘Silver Hero’. For a sophisticated contrast, let it climb a moss pole or trail from a hanging basket where light can gently play across its glossy, nearly black leaves — a living accent of quiet luxury and contemporary tropical design.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 60884754665

    Discover Niche Categories That Outsell dark form pothos

    Top-Converting Item to Boost Your Average Order

    4.5 ★★★★★
    Based on 1104 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    L
    Verified Purchase
    L. Yu
    Bozeman, US
    ★★★★★ 4
    pretty good banana plugs
    Size: 5 Pack, Pattern Name: Banana Plugs
    i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR. alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed. what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action. i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure. i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there. i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better. anyway they seem constructed well - easy enough to install and they do work. thanks for reading
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on September 12, 2019
    A
    Verified Purchase
    AB
    Belleville, US
    ★★★★★ 5
    High quality and robust
    Size: 12 Pairs, Pattern Name: Banana Plugs
    Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on June 16, 2025
    W
    Verified Purchase
    William
    Whiting, US
    ★★★★★ 5
    Solid banana clips
    Size: 5 Pack, Pattern Name: Banana Plugs
    Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 25, 2026
    L
    Verified Purchase
    Leyland Cypress
    San Leandro, US
    ★★★★★ 3
    Get the right wire guage
    Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
    I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on October 15, 2012
    J
    Verified Purchase
    JBDoge
    Boise, US
    ★★★★★ 5
    Wish they came with instructions...
    They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers. I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part. Here are my instructions for installation: 1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring). 2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down 3) Strip your wire tips to 3/8 of an inch (or just slightly under) 4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end. 5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole. 6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug. 7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand. If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it. UPDATE: I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together... GET THESE!
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 8, 2012

    recommand products