Pay in installments of $6.64 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 15 - Oct 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
sansevieria hallii Sansevieria halii 'Pink Baseball Bat' *Three Growing Points* – Kyle's PlantsSansevieria halii 'Pink Baseball Bat' A very attractive Snake Plant or Mother in Law Tongue with thick arched leaves with a pinkish cast. Not difficult to grow and is one of the few succulents that makes a good houseplant. It likes warm temps so shouldn't be exposed to temps below 50F. Like most Sansevieria it is shade tolerant, but give it good filtered light. This is a slow growing species. You will receive the plant shown in the first two images.
Sansevieria halii 'Pink Baseball Bat' A very attractive Snake Plant or Mother in Law Tongue with thick arched leaves with a pinkish cast. Not difficult to grow and is one of the few succulents that makes a good houseplant. It likes warm temps so shouldn't be exposed to temps below 50F. Like most Sansevieria it is shade tolerant, but give it good filtered light. This is a slow growing species.
You will receive the plant shown in the first two images. Plant shown in a 6.5" pot. Last image shows a mature plant.
Important Shipping Information
- PLANTS ARE SHIPPED BARE ROOT If you want me to send them in pots send me a message to discuss. Extra charges due to increased shipping costs will apply.
- Immediate Payment (eBay only) Sorry! I can no longer offer a delayed purchase option as the multichannel inventory management system I have started using requires this setting.
- No Delayed Shipping (eBay only) Once you pay I have to (and WILL) ship within 3 business days or eBay will lower my seller rating. I used to have a way to delay shipping but can no longer do this for the same reason as #2 above. Feel free to message me before buying to see if we can figure something out here, no promises though.
- Winter Shipping If you live in a cold climate consider including a 96 hour heat pack in your order during the cold months. I have them as a listing. Just add it to your order. If you don’t see them just message me.
Thank you!
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 8 reviews
Sort
Product Reviews
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound.
By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.
You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).
I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.
So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.
If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before.
I originally did all the above myself, so that's my experience and so your mileage may vary.
I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.
I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.
WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.
Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Essential Tool for Effective Sound Deadening Installation
The Car Sound Deadening Roller Metal Installation Tool is a must-have for anyone looking to enhance their vehicle's acoustics. Designed to aid in the application of soundproofing materials, this roller ensures a smooth and efficient installation process.
Key Features:
Ergonomic Design: The tool features a comfortable handle that allows for extended use without causing hand fatigue.
Durable Construction: Made with high-quality materials, it withstands the pressures of installation, ensuring longevity.
Efficient Application: The roller helps in evenly pressing sound deadening materials onto surfaces, reducing air bubbles and ensuring a tight bond.
Whether you're a DIY enthusiast or a professional, this tool simplifies the soundproofing process, leading to a quieter and more comfortable ride.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2025
★★★★★ 5
Great Quality and Easy to Use
This sound deadening roller set is a must-have for installing car insulation materials The metal wheels are durable and roll smoothly making it easy to apply pressure for a strong bond The different sizes are perfect for working in tight spaces and larger areas ensuring a professional finish
The ergonomic handles provide a comfortable grip and allow better control during installation The rollers apply even pressure without damaging the material making the process much faster and more efficient
This product offers great value for money excellent functionality and is easy to use If you are installing sound deadening material in your car this set is a great choice Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2025
recommand products
4'' Nursery Pot
22.41
Epipremnum Aureum 'Golden' Pothos | Happy and Easy Houseplants
29.69
San Pedro Cactus for Sale | Trichocereus Pachanoi
26.17
San Pedro Cactus
27.68
Trichocereus Pachanoi Common San Pedro PC Ornamental Grafting Cactus Cuttings and Potted Two 10-12" Trichocereus PC Ornamental Cuttings
20.59