SKU: 63322241348
planting boston pickling cucumber seeds

planting boston pickling cucumber seeds Heirloom Boston Pickling Cucumber Seeds | Grow Boston Pickling Cucumbers

Sale price$21.07 Regular price$23.41
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

planting boston pickling cucumber seeds Heirloom Boston Pickling Cucumber Seeds | Grow Boston Pickling CucumbersHeirloom Boston Pickling Cucumber (3g) Produces heavy and continual yields of fruits measuring 3 to 6 inches, perfect for pickling. The dark green, blunt ended cucumbers can also be used in salads! The average time to maturity is 57 days. Heirloom Boston Pickling Cucumber Planting Instructions Cucumbers are very sensitive to cold. They need warm soil and air, whether direct seeded or transplanted. Don't rush to plant too early. Seeds will not

Heirloom Boston Pickling Cucumber (3g)

Produces heavy and continual yields of fruits measuring 3 to 6 inches, perfect for pickling.

The dark green, blunt-ended cucumbers can also be used in salads! The average time to maturity is 57 days.

Heirloom Boston Pickling Cucumber Planting Instructions

  • Cucumbers are very sensitive to cold. They need warm soil and air, whether direct seeded or transplanted.
  • Don't rush to plant too early. Seeds will not germinate if soil temperature is below 50°F, and germinate only slowly at 68°F.
  • Direct seed 1 to 1 1/2 inches deep, either in rows (2 inches apart in rows 5 to 6 feet apart) or in hills (3 to 6 seeds per hill, hills spaced 3 to 5 feet apart).
  • Thin to 8 to 15 inches apart in rows or 2 to 3 plants per hill. Snip off plants when thinning to avoid disturbing the roots of nearby plants.
  • For early crops, use black plastic mulch and row covers or other protection to speed warming and protect plants.

     

    Direct Seed into Holes in Plastic

    Cucumbers seeded into black plastic usually produce larger yields, as well as earlier ones. For extra early crops, start plants inside 3 to 5 weeks before transplanting.

    Sow 3 seeds per pot in 2-inch pots. Thin to 1 or 2 plants per pot. Grow above 70°F during the day and above 60°F at night.

    Be careful when hardening-off plants not to expose them to cold temperatures. Plants with 1 or 2 true leaves transplant best.

    Transplant into black plastic mulch or warm garden soil after danger of frost has passed and weather has settled. Be careful not to damage roots when transplanting.

    If using peat pots, make sure they are saturated before transplanting and completely buried. If using row covers, remove when flowers begin to blossom to assure good pollination.

    For a continuous harvest, make successive plantings every 2 to 3 weeks until about 3 months before the first fall frost date. About 1 month before first frost, start pinching off new flowers so plants channel energy into ripening existing fruit.

    Most cucumbers have both male and female flowers. The male flowers blossom first and produce pollen, but no fruit. Cucumbers are heavy feeders and require fertile soil, nitrogen fertilizer, and/or additions of high-N organic matter sources. Pale, yellowish leaves indicate nitrogen deficiency. Leaf bronzing is a sign of potassium deficiency.

    To reduce pest and disease pressure, do not plant cucumbers where you've grown them in the last 2 years.

     

    Heirloom Boston Pickling Cucumber Harvesting Instructions

    Generally the time to harvest cucumbers is approximately 60 to 70 days from planting to harvest.

    Cucumbers can be picked at any time there is fruit, depending on the cucumber variety and use of the fruit. Cucumbers should be picked early in the morning and refrigerated immediately.

    The larger a cucumber gets, the more of its flavor is lost, becoming bitter and unpalatable. Cucumbers that have turned yellow are past their peak.

    Once the first cucumbers are ready to be harvested, cut the vine about a 1/2 inch above the fruit. Harvest all of the vegetables before maturity to ensure quality fruits and higher yields.

    During harvest time, cucumbers should be picked at least every other day, with daily harvesting being ideal.


    Saving Seeds

    Slice fruit lengthwise and scrape seeds out with spoon. Allow seeds and jelly-like liquid to sit in jar at room temperature for 3 or 4 days. Fungus will start to form on top. Stir daily.

    Jelly will dissolve and good seeds will sink to bottom while remaining debris and immature seeds can be rinsed away. Spread seeds on a paper towel or screen until dry.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 63322241348

    Discover Niche Categories That Outsell planting boston pickling cucumber seeds

    Top-Converting Item to Boost Your Average Order

    4.3 ★★★★★
    Based on 1343 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    S
    Verified Purchase
    sunshine
    Houston, US
    ★★★★★ 5
    Easy of use.
    Easy to use for edging driveway. I am not a professional and a senior who is learning to take care of my yard.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 16, 2026
    M
    Verified Purchase
    Movie Fan
    Cuba, US
    ★★★★★ 3
    Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
    Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on November 11, 2022
    C
    Verified Purchase
    Christopher
    Phoenix, US
    ★★★★★ 5
    Great edger for home use
    This WORX 12 Amp Electric Lawn Edger did exactly what I needed it to do. It was easy to use, had plenty of power for cleaning up the edges around my driveway and sidewalk, and gave the yard a much cleaner, finished look. I like that it is corded because I do not have to worry about batteries dying, and it has enough power for regular homeowner use. The first pass took a little extra time since the edges needed cleaned up, but once I got going, it worked great. Overall, this is a solid edger/trencher for the price, and I would definitely recommend it for anyone wanting cleaner lawn edges without dealing with gas.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 29, 2026
    R
    Verified Purchase
    rmkd
    Boise, US
    ★★★★★ 5
    Little work horse!
    I LOVE the look of an edged sidewalk. After a few calls to some local landscape companies, I couldn't find anyone with an edger. Crazy! So I bought myself this one! Super easy to put together and just as easy to use. My walk hasn't been edged for many years and was very overgrown. I was nervous that I wouldn't be able to run this thing, but this little work horse did the job for me and did it perfectly. It will be super easy to keep it edged now. Extremely happy with this purchase.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on June 1, 2026
    B
    Verified Purchase
    B. Colonna
    New York, US
    ★★★★★ 4
    Takes The Edge Off!
    This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on September 28, 2020

    recommand products