SKU: 63551475468
nodes on monstera plant

nodes on monstera plant Variegated Monstera Albo Node (1 Node Cutting) (High Plus+ Variegation)

Sale price$26.11 Regular price$29.01
Save 10%

Pay in installments of $7.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

nodes on monstera plant Variegated Monstera Albo Node (1 Node Cutting) (High Plus+ Variegation)**High Plus+ Variegation Node (1 Node Cutting) *Rooting Hormone Pre Dipped: All nodes are pre dipped in an ideal monstera rooting solution to give the cuttings a jump start and make rooting easy at home. HEAT PACK?: Add Heat Pack (40hrs+) (*NOT NEEDED FOR APRIL NOVEMBER) ***Pictures show the general levels of variegation that can be expected at each variegation grade and do not show the exact cutting you will receive. Unfortunately pictures of exact

**High Plus+ Variegation Node (1 Node Cutting)

*Rooting Hormone Pre-Dipped: All nodes are pre-dipped in an ideal monstera rooting solution to give the cuttings a jump start and make rooting easy at home.

HEAT PACK?:  Add Heat Pack (40hrs+) (*NOT NEEDED FOR APRIL-NOVEMBER)

***Pictures show the general levels of variegation that can be expected at each variegation grade and do not show the exact cutting you will receive. Unfortunately pictures of exact cuttings cannot be sent since the cuttings are taken at time of shipping.***

This is "grower special" offering Variegated monstera nodes at very competitive prices compared what can currently be found online. Please read the description to understand what this listing entails. Variegated Monsteras can be tricky to root so it is not advised for beginners. The last picture shows one of the original mother plants.

**Due to the Rare/Limited nature of these cutting, Unfortunately: No Refunds, Replacements or Exchanges will be offered for cuttings that die or do not root in while in your care.**

"Why "Nodes" and not cuttings with the leaves still attached?
-By removing the leaf from the stem cutting, the plant begins to immediately focus on pushing out a new "main stem" weeks ahead of a leaf/stem cutting. It also reduces the surface area of the cutting meaning that its much easier to give the entire cutting a high level of humidity and reduces the transpiration out of the leaf and the possibility of stem rot.

The Nodes will be packaged in clear enclosed containers with lightly damp sphagnum moss to help cushion and keep the node fresh. Some nodes may be thicker/larger diameter, while some are younger and less thick. These containers can also be used to propagate the nodes. By poking some holes in the top and sealing it, the cuttings will benefit from higher humidity levels that are difficult to achieve in the home.

NOTE: ("No Variegation" Cuttings will include 2 Cuttings to increase the probability of one forming variegation in the future, but there are no guarantees of future variegation.)
Cuttings:
***Unfortunately pictures of the exact cutting you will receive cannot be sent as the cuttings are chosen and cut at time of shipping.***

Variegation Grades (Pictures Show the general levels of variegation for each grade):
 
1.) No Variegation: No Variegation shown. All of our monsteras come from the same mother plants and are the same variety but sometimes the plants form leaves that do not have any variegation. They are still a cutting off a variegated monstera and are genetically inclined to form variegation but may or may not. There is no way of knowing. NOTE: ("No Variegation" Cuttings will include 2 Cuttings to increase the probability of one forming variegation in the future, but there are no guarantees of future variegation.)

2.) Light Variegation: Some Variegation streaking shown in the stem.

3.) High Variegation: High Variegation shown in the stem.

4.) High Plus+ Variegation: Especially High Variegation in stem. May include high levels of marbling variegation, streaking or consistently large white portions

Rooting:
Care Tips will be included with the cutting. The most important part is that the cuttings receive high humidity (70%-90%). This can be achieved by regular misting or some kind of enclosed container such as the provided container the cutting is shipped in. It can either be rooted in potting mix, water or the spagnum. If the cutting dries out, the stem will begin to shrivel and becomes prone to stem rot.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 63551475468

Discover Niche Categories That Outsell nodes on monstera plant

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
Grantham, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Belleville, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Louisville, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
Lowell, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Carnegie, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products