SKU: 66356143068
swedish plus tested car seats cybex

swedish plus tested car seats cybex Avionaut Stardust Swedish Plus Tested Car Seat – Baby Boutique UK

Sale price$25.79 Regular price$28.66
Save 10%

Pay in installments of $7.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

swedish plus tested car seats cybex Avionaut Stardust Swedish Plus Tested Car Seat – Baby Boutique UKAvionaut Stardust Swedish Plus Tested Car Seat Rear Facing Only (40105cm) The Avionaut Stardust is a premium rear facing car seat designed to deliver the highest levels of safety, comfort and practicality from birth up to 105cm (approximately 4 years). Engineered in Europe and Swedish Plus Tested, the Stardust focuses on what matters most keeping your child in the safest possible travel position for as long as possible. Unlike many rotating car seats

Avionaut Stardust Swedish Plus Tested Car Seat – Rear Facing Only (40–105cm)

The Avionaut Stardust is a premium rear-facing car seat designed to deliver the highest levels of safety, comfort and practicality from birth up to 105cm (approximately 4 years).

Engineered in Europe and Swedish Plus Tested, the Stardust focuses on what matters most — keeping your child in the safest possible travel position for as long as possible. Unlike many rotating car seats that later turn forward-facing, the Stardust is purpose-built as a rear-facing only seat, ensuring optimal protection for your child’s developing neck and spine.

For everyday convenience, the seat features a smooth 180° rotation towards the vehicle door, allowing parents to easily place their child in the seat without awkward lifting or twisting.


⭐ Key Features

⭐ Rear-Facing Only from Birth to 105cm
Designed exclusively for extended rear-facing travel — the safest way for babies and toddlers to travel in the car.

⭐ Swedish Plus Tested Safety
One of the most demanding crash tests in the world, specifically measuring the forces placed on a child’s neck in a frontal collision.

⭐ 180° Door-Side Rotation
Smooth side rotation makes it easier to lift your child in and out of the seat while maintaining a rear-facing position.

⭐ One-Hand Operation
A single button allows parents to control both the rotation and recline adjustment, making everyday use effortless — even with your hands full.

⭐ ISOFIX Installation with Support Leg
Integrated ISOFIX connectors and support leg ensure a secure and stable installation every time.

⭐ In-Store Fitting & Demonstration Available
Visit our Preston store for expert advice and professional car seat fitting.

⭐ 10 Year Warranty
Long-term peace of mind from one of Europe’s leading car seat safety brands.


💸 USE CODE 5FIVE — Save 5% Today Only


Designed for Maximum Safety

The Avionaut Stardust has been developed as a dedicated rear-facing seat because rear-facing travel significantly reduces the forces placed on a child’s head, neck and spine during a collision.

By focusing purely on rear-facing protection, the seat avoids the compromises often found in multi-stage rotating car seats.

Safety Features

  • Rear-facing only: 40–105cm

  • Swedish Plus Test approved

  • R129 / i-Size compliant

  • ISOFIX installation with support leg

  • Integrated anti-rotation frame for stability

  • Advanced side impact protection

  • Energy-absorbing seat shell

  • Memory foam headrest for enhanced protection


Comfort & Everyday Practicality

While safety leads the design, the Stardust also prioritises comfort for growing children and ease of use for parents.

Thoughtful Comfort Features

Memory Foam Headrest
Absorbs impact forces while adapting to the shape of your child’s head for additional protection and comfort.

Integrated Ventilation System
Airflow channels help maintain a comfortable temperature during longer journeys.

Adjustable Recline Positions
Allows you to easily adjust the seat as your child grows.

Ergonomic Seat Design
Supports correct posture for babies and toddlers.

Extra Legroom for Growing Children
The integrated anti-rotation frame creates more space for little legs, making extended rear-facing travel more comfortable.

Newborn Insert Included
Provides a secure and supportive fit for smaller babies from 40cm.


Why Parents Choose the Avionaut Stardust

Parents choosing extended rear-facing often want one thing above all — maximum safety without compromise.

The Avionaut Stardust is designed specifically for this purpose. By eliminating forward-facing modes and focusing entirely on rear-facing protection, the seat delivers outstanding safety performance backed by the Swedish Plus Test.

Combined with intelligent features like one-hand rotation, memory foam protection and breathable comfort fabrics, the Stardust offers a safe and practical travel solution from your baby’s first journey home through to around four years old.

 

Why Rear-Facing Only Car Seats Are Safer Than 360° Seats

When choosing a car seat, safety is always the most important factor. While 360° rotating car seats are popular for their convenience, rear-facing only car seats are specifically engineered to provide the highest level of protection for babies and young children.

Here’s why many safety experts recommend keeping children rear-facing for as long as possible.


Better Protection for the Head, Neck and Spine

In a frontal collision — the most common and most severe type of crash — a rear-facing seat supports your child’s head, neck and spine as one unit.

Because babies have proportionally larger heads and developing neck muscles, this support is critical. A rear-facing seat spreads crash forces across the entire back of the seat shell, dramatically reducing strain on the neck.

Forward-facing seats, or seats designed to later turn forward, place more pressure on a child’s neck during impact.


Designed Without Compromise

Many 360° rotating car seats are designed to perform multiple roles — rear-facing, forward-facing, and sometimes booster modes. While convenient, this means the seat must compromise between different positions.

Rear-facing only seats are engineered with one single purpose: maximum rear-facing protection.

This focused design often allows for:

  • Stronger seat structures

  • Optimised impact protection

  • Better support for a child’s body during a crash

  • Improved ergonomics for extended rear-facing travel


Swedish Plus Test Approval

Some rear-facing only seats, like the Avionaut Stardust, are approved under the Swedish Plus Test — widely considered the toughest car seat crash test in the world.

The Swedish Plus Test specifically measures the forces placed on a child’s neck in a frontal collision. Seats that pass must demonstrate extremely low neck load values, confirming they provide exceptional protection.

Very few seats achieve this certification.


Extended Rear-Facing for Longer

Safety experts recommend keeping children rear-facing until at least 4 years old whenever possible.

Rear-facing only seats make this easier because they are designed specifically for extended rear-facing use, often offering:

  • More legroom for growing toddlers

  • Better recline positions

  • Improved comfort for longer journeys


Convenience Without Compromising Safety

Rear-facing only seats can still be practical for everyday use.

Many models now include 180° door-side rotation, allowing the seat to turn towards the car door so parents can easily lift their child in and out — without ever turning the seat forward-facing.

This means families can enjoy easier access while still maintaining the safest travel position.


The Bottom Line

While 360° car seats offer flexibility, rear-facing only seats prioritise safety above everything else.

By focusing solely on rear-facing protection, these seats provide some of the highest levels of crash protection available for babies and toddlers.

For parents who want the safest possible option from birth through toddler years, a dedicated rear-facing seat like the Avionaut Stardust Swedish Plus Tested is an excellent choice.

The rear facing swedish plus tested stardust is made to order, please allow upto 2 weeks for delivery. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 66356143068

Discover Niche Categories That Outsell swedish plus tested car seats cybex

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 9 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
hearmeout
Belleville, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Phoenix, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Chelsea, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Louisville, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Bozeman, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products