SKU: 6704239594
baby jogger infant insert

baby jogger infant insert TwinGo Carrier Infant Insert (for use with infants 7+lbs)

$22.08 $24.53
Save 10%
No.2 Bestseller on virtipatel.com >

Pay in installments of $6.13 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

baby jogger infant insert TwinGo Carrier Infant Insert (for use with infants 7+lbs)The Infant Insert is an innovative cushion placed inside the TwinGo Carrier to support newborns over 7+ lbs in an ergonomic position. The healthy hip and spine position can be achieved in the Fetal Position or Straddle Position. This accessory is intended for the Front Carry only. With two adults available, you can divide the TwinGo Carrier into two independent carriers for each adult to carry one baby on their front. The cushion is made of premium

The Infant Insert is an innovative cushion placed inside the TwinGo Carrier to support newborns over 7+ lbs in an ergonomic position. The healthy hip and spine position can be achieved in the Fetal Position or Straddle Position. This accessory is intended for the Front Carry only. With two adults available, you can divide the TwinGo Carrier into two independent carriers for each adult to carry one baby on their front. The cushion is made of premium soft foam and covered with 100% black cotton fabric.

Why do I need the Infant Insert? 

When full-term babies are 0-3 months, they have limited hip motion and short legs that cannot straddle the panel of the carrier. For these two reasons, the Infant Insert allows a baby to comfortably sit in the TwinGo as early as 7lbs in the Front Carry Position. Without the addition of the insert, you can start using the TwinGo in Front Carry Position at 10lbs (or when your baby can comfortably straddle the carrier from knee-to-knee). The average full-term baby can comfortably straddle the carrier from knee-to-knee around 3 to 4 months old.

When do I use the Infant Insert? 

Use the Infant Insert to support newborns starting at 7 lbs (3.2 kg) and up to the developmental stage when your baby's legs can naturally spread to straddle the panel of the TwinGo Carrier.

How do I use the Infant Insert? 

Before placing your baby in the carrier, slide the tail of the Infant Insert directly into the waistband; the label on the Infant Insert will touch your stomach. Bring your baby to your chest and place your baby's bottom on top of the round cushion. If your baby's hips have limited motion, he will sit in the fetal position. If your baby's hips have more advanced motion, he will spread his legs to straddle the cushion. Your Infant Insert will come with an instruction manual to illustrate these steps.

What if my newborn needs more head or neck support? 

If your baby has a long torso and requires additional neck and head support, you can either 1) roll the Sleep Hood behind your baby's neck and secure it in place with the extension straps or 2) you can add the TwinGo Panel Extender for a firm head support option.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 6704239594

Discover Niche Categories That Outsell baby jogger infant insert

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
Henry
Phoenix, US
★★★★★ 5
Worth it
Size: 5 Quart, Style: 1 Pack
Expensive but good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
S
Verified Purchase
Sunny dhama
Battle Creek, US
★★★★★ 5
It Works! (Mustang 2016 ecoboost knocking noise)
Style: Modifier
I recently experienced a remarkable transformation in my 2016 Mustang Ecoboost, thanks to the LIQUI MOLY Oil Additive Cera Tec 3721. As someone with a passion for automobiles and a background as a software engineer, I'm always on the lookout for ways to improve my vehicle's performance. This product turned out to be a game-changer. One of the issues I had been facing with my Mustang was a persistent knocking noise, which can be quite concerning for any car enthusiast. After researching potential solutions, I decided to give LIQUI MOLY Cera Tec 3721 a try. And I must say, I was pleasantly surprised by the results. The primary reason I opted for this oil additive was its promise of ceramic wear and tear protection. As someone who values the longevity of my vehicles, I wanted to reduce engine friction and wear as much as possible. This product did exactly that. The moment I started using it, I noticed a significant reduction in engine noise, especially the knocking sound that had been bothering me. It provided a smoother engine performance, and the difference was noticeable. What impressed me even more was the impact on fuel consumption. As someone who loves to travel and has explored six states during my time in the USA, fuel efficiency is a key concern. LIQUI MOLY Cera Tec 3721 not only improved my engine's performance but also led to lower fuel consumption. This means fewer stops at the gas station and more miles of adventure. Moreover, being a mentor and research assistant, I appreciate the science behind this product. It's clear that LIQUI MOLY has put considerable effort into developing a high-quality additive that benefits both petrol and diesel engines. This is the kind of innovation that I believe will shape the future of the automotive industry. In conclusion, LIQUI MOLY Oil Additive Cera Tec 3721 has not only fixed the knocking noise in my Mustang but has also enhanced its overall performance. It's a product that aligns with my goal of staying at the forefront of technology and innovation in the IT sector, even when it comes to my car. I highly recommend it to anyone looking to improve engine performance, reduce friction, and achieve better fuel efficiency. It's a small investment with significant returns for your vehicle.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2023
R
Verified Purchase
Robert Higginson
Whiting, US
★★★★★ 5
Skeptical...... to Believer
Style: Modifier, Style: Modifier
I've waited awhile to write this review, to see how time effected my opinion. A little background, my daughter really wanted a 328i, so I went out and found a clean, single owner vehicle with a little over 100k on it. Its the family's first BMW, but as a mechanic I've seen and worked on them all. The BMW N52 engine seems overly complicated for what it does. Power output and economy are just average even though its got just about every bell and whistle including variable valve timing. One thing that struck me was how noisy it was. Kinda like a quiet sewing machine. I changed the oil to Mobil 1 0w/40 Euro blend and she drove it for 7k miles. During this time I read up on all the LL/01 oils for this car, so next oil change I used Castrol Edge, which is LL/01 certified. No difference. Car runs well, still sounds like a sewing machine. 7k more miles go by, and I learn about this CeraTec additive, and decide to give it a try based on all the good reviews. Yup, looks like a Orange Julius!! Well, I dump it it, and take it around the block. Engine seems a little quieter and smoother, but figure its my brain screwing with me. I slam the hood, and give my daughter the keys back, and off she goes. And here's where it gets interesting.... My 19 year old daughter doesnt know squat about cars. She a 100% gas it up and go girl. So about 2 weeks after the CeraTec goes in we are sitting at the dinner table and she says... " Oh Daddy, I forgot to thank you for tuning up my car". I ask her what makes her think I did? She replies that since the last service its much smoother idling at red lights and its quieter. (Remember, she's driven it for 7500 miles at this point) I asked her how could she tell, as the radio is always at least half volume. She says when its running and she's got the window down ordering at a drive -thru it used to go "tickity-tickity" ( her words)as it echo'ed off the building.. and now its silent. I go out and fire it up and roll down the window and stick my head out.... yup. Silent and verrry smooth. She also has average MPG constantly on display , and its improved about .65 mpg. So, if you add all that up, it seems to work. Liqui-Moly says its lasts 30k miles. I service the car every 7k, so we'll see if this all stays the same after a service, which is coming up soon. The car uses zero oil between services, so I cant comment on that. But from a smoothness, quietness point of view, if my daughter noticed it without me prompting her, I would say thats what made me a believer more than anything. Thanks Liqui-Moly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 1, 2019
R
Verified Purchase
Ricardo
Lowell, US
★★★★★ 5
Great product
Style: Modifier
Noticed a more smooth engine idle and less tick noise in my Tacoma. Is a win
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026
B
Verified Purchase
Brian Kolley
West Palm Beach, US
★★★★★ 5
My 2018 Mustang GT BBQ Tick went away but came back.
Style: Modifier
Update 1-26-2019: The BBQ/Typewriter tick came back this morning. So, I'd say that if you're trying to use the Ceratec to quiet the tick, it will work for a little while, but will eventually return. I don't think there's anything else that can be done to quiet the tick and it's a crap shoot if you get it serviced. In my case, it only ticks during warm up after the transition from high idle, and goes away completely once the entire engine is fully warmed up, so I'm just going to live with it. I'm still giving the Ceratec a 5 because it did reduce my friction enough for a small MPG improvement, so I believe it works as advertised and I'm not going to blame them for not silencing the tick. Update 1-20-2019: After a few days with only the one bottle poured in, my tick came back. Since one bottle is only 1/2 the recommended concentration for the 10 quarts in a 2018 Mustang GT, I bought another bottle and added it and the tick is now gone again. We'll see if it lasts. I can tell you that my fuel economy has improved. I have a little over 11,000 miles now and I always display my fuel economy meter and I use it. I've never reset my average fuel economy meter since the day I bought the car new. I've been pretty well stuck at 21.6 MPG for the last couple months. Since I've put in the Ceratec, my average fuel economy has increased to 21.8 MPG, so it's jumped 0.2 MPG in roughly 2 weeks. With over 11,000 miles included in the average, it takes a pretty significant improvement in friction to make that average move that much in that short a time. Even if my tick comes back again, I'm sold on Ceratec for the friction reduction alone. I'll update the review again if the tick comes back. Original Review: My 2018 Mustang GT developed the infamous BBQ/Typewriter tick immedaitely after my first oil change. I used Mobil One synthetic at 3500 miles on my first oil change. I did my 2nd oil change at 10K miles with Mobile One, but the tick was still present. After seeing people on YouTube having success eliminating their tick with Ceratec and after reading the one other review of a 2018 Mustang GT owner here on Amazon, I decided to try it. I ordered 1 bottle. It arrived on a Friday and poured it in immediately after I got home from work. It's an hour drive one way to work, so the engine was at operating temperature, where, in my case, the tick goes away. I only get it when the engine switches from high idle to normal idle after a cold start and the tick is quite loud for at least the 15 minutes it takes for me to get to the drive through where I get my morning coffee, where I can really hear the tick echoing off the wall. After pouring it in, I started the car and let it idle, but didn't really notice any change. I then took it for a drive and did some hard pulls to get the engine to rev under load to the red line. After that, I put the car in the garage until I drove to work on Monday. When I went to the drive through to get my morning coffee, there was no tick! It was gone! I listened real hard, but all I could hear was the normal direct injector pump noise. Then, after my hour long drive to work, I left car running and got out to listen. With the hood closed, it was quieter than at any time since I bought it. It was virtually silent. Even the DI pump noise was barely audible. The car also sounded and felt different during the drive to work. The engine seemed like it was smoother somehow. It might have been my imagination, but after the silence in my parking spot at work, I wouldn't be surprised if the engine did run smoother. At any rate, I only used 1 bottle to treat the 10 quarts of oil, which is half the amount the mfg says to use. So, I'll see how long it lasts, but it definitely worked even at half its normal concentration. I highly recommend it for anyone who has the 2018 Mustang GT tick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2019

recommand products

Baby Trend Kids Navigator PLUS 2-in-1 Stroller Wagon
20.92
Explore Cutting-Edge Gadgets and Game Haven – Momo Gadgets
20.93
Thule Urban Glide 3 Double Stroller
28.35
Evenflo Transformer Travel System and Stroller Wagon with LiteMax NXT Infant Seat with SS
27.16
Trio Trolly Stroller Wagon – Convertible & Foldable
25.43