SKU: 6757933576
automatic timer for watering plants

automatic timer for watering plants Automatic Hose Timer with Rain Sensor

Sale price$22.37 Regular price$24.85
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

automatic timer for watering plants Automatic Hose Timer with Rain SensorThis Hose Timer not only detects when it rains to prevent your irrigation system from coming on unnecessarily, but it also allows three separate watering schedules to be set up for specific days, so you can put your feet up! This Timer is the perfect accessory for any irrigation or sprinkler system set up in your yard. The Timer helps to conserve water and ensures you NEVER forget to water your garden again. It is easy to use and quick to set up with

This Hose Timer not only detects when it rains to prevent your irrigation system from coming on unnecessarily, but it also allows three separate watering schedules to be set up for specific days, so you can put your feet up!

This Timer is the perfect accessory for any irrigation or sprinkler system set up in your yard. The Timer helps to conserve water and ensures you NEVER forget to water your garden again.

It is easy to use and quick to set up with interval programming options. 

Features

+ Large, clear LED display screen.

+ The timer has a manual on/off watering feature, which allows you to water manually in between your set schedule. 

+ Rain sensor built into the top of the timer, which will cancel your watering schedule if you are experiencing wet weather.*

+ The LED screen will turn off when not in use to prolong the battery life. 

+ You can set the watering session to run for any time between 1 second and 99 minutes.

+ Watering frequency can be set from as little as every hour, up to 15 days. 

Installation

Insert 2 x AA alkaline batteries (not included) by opening up the cover on the back of the unit. Once inserted, press the cover down until flush with the timer casing to ensure a watertight seal.
Please note, rechargeable batteries should not be used as their lower voltage output may affect the timer's ability to open and close the internal valve. 

The Timer comes with a standard 3/4" thread to fit any standard faucet.

Set up

After the batteries are inserted into the timer unit, a default screen will appear. Press the ‘SETUP/OK’ button and configure timing using the ‘UP (^)’ and ‘DOWN (v)’ buttons. Then, once the correct times are entered, press the ‘SETUP/OK’ button to confirm and move on to the next setting.

To turn the timer off, press and hold the 'ESC/OFF' button for 3 seconds or until 'OFF' shows up on the screen. To reactivate, press and hold the 'ESC/OFF button again.

Recommendations

  • Check the battery indicator before going away on vacation. It is a good idea to put new batteries into the Timer in case the battery runs flat while you are away OR, alternatively, have someone available to check on the Timer while you are gone. Do not use rechargeable batteries. 

  • Do not submerge the Timer under water.

  • When expecting freezing temperatures, remove the Timer from the faucet and store inside to prevent water from freezing inside the unit.

  • Check the included tap filter every so often to ensure no blockages occur. To do this, unscrew the Timer from the tap and remove the washer to clean the filter inside. 

 *Rain sensor will only work if the Timer is out in the elements, should the Timer be sheltered from the weather, it will not work efficiently.

WARNING: When going away from home for long periods of time, we recommend reducing the water pressure at the tap. In the event of product failure, this will reduce overall water loss. Hoselink will not be held liable for water damage or loss due to product failure.

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 6757933576

Discover Niche Categories That Outsell automatic timer for watering plants

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 403 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Draper, US
★★★★★ 5
Solenoid replacement
Size: 96158T-2PCS
No changes were needed, fit exactly as the oem. Happy Happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 10, 2025
S
Verified Purchase
SOmeone
Lake Worth, US
★★★★★ 1
Did not work.
Size: 96158T-2PCS
I went to double check that I can read but it says 35hp-275hp and it sure didn’t work on my 200ho mercury so I do not recommend. If you’re on a time crunch don’t push your luck buy OEM like I am doing right after this review.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
J
Verified Purchase
James
Fort Morgan, US
★★★★★ 5
Great Banana Plugs
Size: 6 Pairs / 12 pcs
I recently purchased these FosPower banana plugs to tidy up my speaker wiring, and they’ve been a significant improvement over bare wire ends. Installation is straightforward: strip the wire, loosen the two tiny set screws, slide the wire in, tighten everything down, and then screw the barrel back on. Once assembled, the connection feels secure and tight, making it much easier to swap gear around and reducing the risk of stray strands causing a short. The standout feature of this design is the dual set-screw clamp. It firmly grips the speaker wire without relying on the outer collar to “crush” it in place. I’m using 12-gauge wire, and it holds well for my setup. Initially, the plugs may fit snugly in some binding posts. Once seated, there’s no wobble, but it might take a bit of extra push the first time. The set screws are small, so a bit of precision is needed. Use a small flathead screwdriver and don’t over-tighten them. Overall, these plugs feel well-made, look clean once installed, and fulfill their purpose as banana plugs: making speaker connections quick, neat, and reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
T
Verified Purchase
Todd C Blake
New York, US
★★★★★ 5
Great Banana Plugs!
Size: 6 Pairs / 12 pcs
These FosPower banana plugs work very well. I have used dozens of these great FosPower banana plugs over the years, and they definitely work as advertised. When comparing apples to apples (or bananas in this case....lol), all Banana plugs work virtually the same way, and these banana plugs are no different. Strip speaker wire, unscrew banana plug cover, loosen speaker wire retaining screw(s), insert speaker wire, tighten speaker wire retaining screw(s), screw on banana plug cover, and wallah, a secure/conductive speaker/amplifier wire connector is created. Albeit, some banana plugs require the speaker wire to be splayed over a hollow post, and then they are held down by a screw-on retainer/cover. However, I much prefer these FosPower dual retaining screw type of banana plugs for their speaker wire holding ability. I always use high quality 14 gauge OFC speaker wire with these FosPower banana plugs, and they work perfectly together. I have used these FosPower banana plugs with many different speaker and amplifier brands over the years, including Klipsch, Pioneer, Polk, Denon, Dayton Audio, and Fosi with no problems at all. They just work, and work well. I have never had a FosPower banana plug break, release the speaker wire or short out, in all of the years that I have used them. Yes, these FosPower banana plugs do fit rather tightly into the connectors, at first, on a lot of speaker and amplifier brands/models. However, after the initial "squeeze" the banana plugs will lossen up, and become easier to install and remove. However, they still retain their great holding ability even after the initial squeeze. In order to overcome this initial "tightness," I usually just stick the FosPower banana plugs into a connector of an old portable amplifier, before assembling them, in order to squeeze them before inserting them into their final speaker or amplifier destinations. This is especially useful when working in tight places, where there is not much room to work in order to push the FosPower banana plugs into their tight connections firmly. Overall, I highly recommend these FosPower banana plugs. I am currently using them all over the house and shop for home theater and music listening (and testing projects). Just be aware of the tight fit in some speakers and amplifiers. Also, the 2 very tiny speaker wire retaining screws can be a challenge sometimes. Just use a good standard blade jewelers screwdriver, and be careful not to remove the retaining screws all of the way or over-tighten them. Once these things are mastered, using these FosPower banana plugs becomes second nature. Have fun!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 28, 2024
S
Verified Purchase
Steve M Vedder
West Palm Beach, US
★★★★★ 5
Great Product
Size: 6 Pairs / 12 pcs
These banana plugs have worked perfectly, no matter what gauge I have run in them, they work great. Easy assembly and great quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026

recommand products