SKU: 6855331286
snake's tongue plant

snake's tongue plant Buy Mother in Laws Tongue Phoenix, AZ | Sansevieria

Sale price$25.09 Regular price$27.88
Save 10%

Pay in installments of $6.97 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

snake's tongue plant Buy Mother in Laws Tongue Phoenix, AZ | SansevieriaThe Toughest Indoor Outdoor Plant for Phoenix Homes Mother in Law's Tongue Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and

The Toughest Indoor-Outdoor Plant for Phoenix Homes — Mother in Law's Tongue

Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword-leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners — it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and total neglect, making it the perfect choice for busy Scottsdale homeowners, Mesa rental properties, Gilbert office lobbies, and Chandler covered patios where other plants give up.

Mother in Law's Tongue Plant Details

Attribute Detail
Scientific Name Sansevieria trifasciata (syn. Dracaena trifasciata)
Common Names Mother in Law's Tongue, Snake Plant, Sansevieria, Saint George's Sword
Mature Height 2–4 feet
Mature Width 1–2 feet (clumping, spreads by rhizomes)
Growth Rate Slow to moderate — 2–4 new leaves per year
Sun Full sun to deep shade. Tolerates any light condition.
Water Very low. Extremely drought-tolerant. Overwatering is the #1 killer.
USDA Zones 9–12 (Phoenix is Zone 9b–10a — protect from hard frost below 32°F)
Soil Well-draining required. Adapts to Arizona caliche soils with added sand or gravel.
Foliage Evergreen — stiff, upright sword-shaped leaves with green-yellow variegation
Bonus NASA-proven air purifier — removes formaldehyde, benzene, and xylene

Mother in Law's Tongue Uses in Phoenix Landscapes

Covered Patios & Shaded Entryways

Mother in Law's Tongue is the top pick for Phoenix covered patios, north-facing entries, and shaded courtyards where most plants struggle. The upright, architectural form adds clean modern lines to outdoor living spaces in Scottsdale, Paradise Valley, and Chandler. Group 3–5 plants in matching pots for a designer-look patio border, or plant directly in a shaded landscape bed along a covered walkway.

Indoor Accent & Office Plant

Snake Plant is one of the few plants that actually thrives in air-conditioned indoor environments. Place it in a bright window, a dim hallway, or a fluorescent-lit office in Mesa or Tempe — it performs in all conditions. Its air-purifying qualities make it a smart choice for bedrooms, home offices, and commercial lobbies across the Phoenix Valley.

Modern Desert Container Plantings

The bold vertical leaves of Sansevieria look striking in sleek concrete, ceramic, or metal planters. Use a single large specimen as a patio focal point, or line up matching containers along a Gilbert pool fence or Peoria outdoor kitchen. Container planting also makes it easy to move indoors during rare hard freezes.

Low-Maintenance Ground Cover & Border

Planted en masse in a shaded landscape bed, Mother in Law's Tongue creates a dense, low-water ground cover that never needs mowing. Space 12–18 inches apart for a filled-in border within 2 seasons. Works beautifully under Desert Museum Palo Verde trees or along shaded property walls.

Best Time to Plant Mother in Law's Tongue in Phoenix

Spring (March–May) is the ideal planting window. Warm soil and long days fuel rapid root establishment. Fall (October–November) is the second-best option. Avoid planting outdoors in winter — Sansevieria is frost-sensitive and should be protected or brought inside when temperatures drop below 32°F.

How to Plant Mother in Law's Tongue

  1. Dig wide, not deep — 2x the root ball width, same depth. Sansevieria has shallow rhizome roots.
  2. Ensure drainage — break through any caliche layer. Add coarse sand or perlite if soil holds water.
  3. Backfill with native soil — a 50/50 mix of native soil and coarse sand is ideal for in-ground planting.
  4. Spacing — 12–18 inches apart for a border or mass planting; 2+ feet for standalone specimens.
  5. No water basin — Sansevieria prefers to dry out quickly. Skip the soil ring.
  6. Gravel mulch — 2 inches of decomposed granite. Avoid organic mulch that traps moisture against the base.

Watering Mother in Law's Tongue in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Water once, deep soak, then let soil dry completely before watering again (5–7 days).
  • Months 1–3: Every 10–14 days in warm months.
  • Months 4–12: Every 2–3 weeks. Let the top 2 inches of soil dry between waterings.
  • After Year 1: Every 3–4 weeks in summer; monthly or less in winter. Outdoor plants in shade may need no supplemental water in winter.

Drip Irrigation

Place 1 emitter (0.5–1 GPH) 6 inches from the base. Sansevieria is far more likely to die from overwatering than underwatering. If leaves turn mushy or yellow at the base, you're watering too much. When in doubt, skip a cycle. Indoor plants in pots should be watered only when soil is completely dry — typically every 2–4 weeks.

Can Mother in Law's Tongue survive outdoors in Phoenix year-round?
Yes, in most of the Valley. It thrives outdoors in covered, frost-protected areas. During rare hard freezes (below 32°F), either cover the plant with frost cloth or move containers indoors. In most Phoenix winters, it handles outdoor conditions just fine.

Is Snake Plant toxic to pets?
Yes, Sansevieria is mildly toxic to dogs and cats if ingested. It typically causes nausea and vomiting. If you have curious pets, place the plant on an elevated surface or choose a pet-friendly alternative.

How do I propagate Mother in Law's Tongue?
The easiest method is division — separate the rhizome clumps when repotting. You can also propagate from leaf cuttings placed in well-draining soil, though this takes 2–3 months to root. Division gives you an instant new plant.

Why is my Snake Plant not growing?
In Phoenix, the most common reasons are overwatering (causes root rot) and too much direct summer afternoon sun (causes leaf burn). Move to bright indirect light or morning sun, reduce watering, and growth should resume in spring.

You May Also Like

  • Elephant's Ear — bold tropical foliage for shaded Phoenix patios and entryways.
  • Flapjacks — another tough succulent with dramatic paddle-shaped leaves that pairs well with Snake Plant.
  • Blue Elf Aloe — a compact, colorful aloe that thrives in the same containers and landscape beds.
  • Ponytail Palm — an architectural indoor-outdoor plant with similar indestructible qualities.
  • Firestick Euphorbia — adds vivid color contrast next to Snake Plant's green-yellow foliage.

How Many Mother in Law's Tongue Do I Need?

Snake Plant clumps stay narrow, just 1 to 2 feet wide, and spread slowly by rhizome, so it is planted in groups for a border, a mass bed, or matching containers. Space plants 12 to 18 inches apart and they knit into a filled border within about two seasons. Use this table to size a shaded bed or border run.

Border / bed length Spacing 12 in Spacing 18 in
10 ft 10 plants 7 plants
20 ft 20 plants 14 plants
Container cluster 3 to 5 plants per large pot for instant fullness

Mother in Law's Tongue Season-by-Season in Phoenix

  • Spring (Feb to Apr): Best planting window. Warm soil and long days push 2 to 4 new upright leaves and any rhizome spread for the year.
  • Summer (May to Sep): Thrives in heat under cover or bright shade. Direct west afternoon sun can scorch the leaves, so give it morning sun or filtered light. Monsoon humidity is fine as long as the soil drains and the base dries out between waterings.
  • Fall (Oct to Nov): Good secondary planting season. Growth slows as nights cool.
  • Winter (Dec to Jan): This is the one weak spot. Sansevieria is frost-sensitive and leaves turn mushy below about 32F. Cover with frost cloth on freeze nights or grow it in pots you can pull under cover or indoors.

At a Glance

✔ Drought-Tolerant   ✔ Evergreen   ✔ Low-Maintenance   ✔ Pool-Friendly (Low-Litter)   ✔ Fire-Wise   ✔ Deer & Rabbit-Resistant   ✔ Spineless

Plant It With

  • African Spear: a cylindrical Sansevieria cousin that layers texture in the same shaded bed.
  • Elephant's Ear: bold broad foliage for a tropical, shaded-patio pairing.
  • Flapjacks: paddle-shaped succulent that contrasts the upright sword leaves.
  • Ponytail Palm: another tough, sculptural indoor-outdoor plant with the same care needs.

Is Mother in Law's Tongue Right for Your Yard?

Snake Plant is ideal for covered patios, north entries, shaded courtyards, and indoor rooms anywhere in the Valley, in fast-draining soil or a pot where the roots dry out between waterings. It is not a fit for an exposed west-facing bed in full afternoon sun, a low spot that stays wet, or a frost-exposed location you cannot cover in winter. It is also mildly toxic to pets if chewed, so keep it out of reach of curious dogs and cats.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 6855331286

Discover Niche Categories That Outsell snake's tongue plant

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
CPT RSV
Omaha, US
★★★★★ 5
Expensive Look Without The Expense!
Size: Medium, Color: Black, Size: Medium, Color: Black
Sizing: If you’re a true large like me and close to but less than fifteen pounds overweight, normal length and with a 44” chest, buy a medium and use the shirt to inspire you to lose the beer belly. If you have similar dimensions but are overweight by up to thirty pounds, get the large. Materials: The mediums are manufactured to 70% synthetic, 30% linen—which is a great mix, as is doesn’t have to be ironed after it’s washed and hung to dry, nor does it have to be ironed every time you get up from a chair. I’ve had many 100% linen shirts and sure, they look great after you spend thirty minutes ironing them, just to look like a crumpled up newspaper after you get out of your car. My experience with linen shirts is what brought me here. Unboxing the shirt: I threw it on an ironing board the moment I unbagged it. I tried the Synthetic setting on the iron—it wasn’t enough. I then tried the Wool setting and set the steam setting to constant medium to high. It worked great. I didn’t have to press down at all, just lightly glided the iron across wrinkled areas of the shirt. Within five minutes, the shirt looked like a hundred-dollar shirt. The material is light, yet feels heavy to the touch and breathes very well in the heat. The hidden buttons give a clean, modern look that allows the shirt to be worn with anything from shorts and sandals to dress slacks and shoes in a club. I like to wear these shirts, untucked with a pair of jeans and western boots. This shirt is very comfortable, fits nice and is extremely versatile.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
N
Verified Purchase
Nick
Whiting, US
★★★★★ 4
Great for the price
Size: Medium, Color: Grey
Nice and light material. Looks good. Suitable for hot temperatures and casual attire. The only thing I've noticed so far that isn't so great, is that the buttons are rather cheap and the middle part broke out on a few of them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
H
Verified Purchase
Hypercussion
Boise, US
★★★★★ 5
Impressive solution for the price
Configuration: 3-pack, Style: without eero Plus
I'm a network engineer snob who won't hesitate a single second to give most of the home router and wifi junk sold today a terrible review when it's warranted. After having two router/wifi solutions made by that company that starts with Net and ends with Gear fail on me in less than 6 months, I was about ready to spend a few grand on a Ubiquiti solution and wire up my home for access points and cameras. Then a colleague and friend of mine suggested this eero mesh system as a lower cost/effort option. I'm not a fan of plug and play stuff and was skeptical but figured I could return it if not happy. I have to say I'm pretty impressed. The set up was almost too easy. Just download the eero app to your phone, plug a device in and connect the 2.5g port to your router and the app will walk you through it all. Most importantly, it worked really well when solutions like this from other vendors don't forcing you to connect a cable and manually set up. At first I didn't like that there isn't any ability to give the 2.4ghz and 5ghz networks different SSIDs (I had my previous router set up this way and changing this would have meant climbing up a ladder and reconfiguring several Ring cameras) but eero let's you change the name of the Guest Network to anything you want so this was an easy work around. As others have mentioned download the Wifiman app and shortcut and start scanning your house after you install the main router/wifi device. When you find spots that the signal drops below GOOD quality (-70dbm) drop another unit in between the first and where the signal dropped to poor quality. I bought the 3 pack thinking I'd need it to cover a 6,000 sq ft home. However one device was provided good coverage for most of my house and two provided either excellent or good signal strength everywhere inside and even outside on my patio and driveway. I only have one device on the first and second floors and both floors as well as the basement are all receiving good/excellent signal quality. I could have definitely saved $100 and gone with a two pack but I'm ok with having an extra device as a back up or if someone else in the family needs it (keep in mind any of these devices can act as a standalone router/wifi solution) or even to temporarily extend WiFi farther out into my yard in fair weather for outdoor gatherings etc.. Overall I'm impressed. The dashboard and tools/analytics included with the app are more than adequate for home users. You can even set up alerts for new devices connecting to your network. The GUI is modern and responsive and not like some of the traditional router vendors who still support an antiquated web login that takes forever to connect, lags between function and times out frequently. Time will tell if this is reliable but as mentioned a friend and colleague who owns his own network solution business told me he installs these in homes where the cost and wiring of a Ubiquiti or similar solution is prohibitive and he's never had an issue with their performance and reliability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
D
Verified Purchase
D.S.
Whiting, US
★★★★★ 5
Bomb.com
Configuration: 3-pack, Style: without eero Plus
Not sure why this doesn’t have 5 stars from everyone! Got the three device set up and man this couldn’t have been easier to set up. This system is bomb, like I’m not sure how much easier of a setup people even want. Everything was basically plug-and-play, and the app walks you through it so smoothly it almost feels too easy. Performance-wise, it’s been amazing. The coverage is solid throughout the whole house, and the speeds are not just fast—they’re consistent everywhere on Wi-Fi, not just when you’re hardwired. I haven’t had any random drops or dead zones like I used to deal with. Compared to the Cox gateway, it’s not even close. They charge $15 a month to rent that thing and it doesn’t hold a candle to this setup—honestly kind of ridiculous. And the quality? Top tier. It honestly feels like an Apple product. From the packaging to the devices themselves, even the cords and the app—everything just feels super polished and premium. I’m actually glad Amazon acquired eero because you can see that level of refinement in the whole experience. My only complaint is the price tag. $400 is definitely not cheap. But when you break it down, Cox charges $15 a month to rent their gateway—that’s $180 a year. In just about two years, this system basically pays for itself, and you’re getting way better performance the whole time. Overall, 110% happy with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
Verified Purchase
314
New York, US
★★★★★ 5
Works very well. Very easy to set up.
Configuration: 1-pack, Style: without eero Plus
Previously just had the standard wifi router provided by ATT with fiber connection. It was fine really but some parts of the house lacked good signal. Purchased the 6 Pro E and put the ATT router in bridge mode, the Eero instructions on doing that were perfect and it worked. The 6 Pro E was up and running in minutes and did it's own software updated immediately. Was super easy to rename the network, set the password and permissions and every single device that was previously on the old router connected seamlessly on it's own without any intervention. I think possibly one 2.5GHz device may not have auto-connected but it connected just fine once I put it in pairing mode. We have a lot of devices, mixed 5ghz and 2.5ghz, and so far both networks broadcast fine and everything works. Also 5th Gen Echo Dots seamlessly boost the wifi signal and I already had those in nearly every room before getting the Eero 6 Pro E. Few things to note: I don't pay for Eero Plus subscription so I don't use any of the extra reporting features. New devices connect with what looks like a random code or with a manufacturers name, which usually does not help identify what it is. That can be a challenge when you're trying to figure out if it is something you just added or someone else who managed to get in passed the firewall. Googling the name that shows up does not always help figure out what it is. For some reason my iphone reconnects every few weeks as a "new device" with a name of "unknown device". This does not happen with my husband's iphone. This means that at any given time there is one active "unknown device" and several others that are inactive with that name. Looks like eventually they drop off the recently connected inactive list. Even if I rename it to something specific, after a few weeks it will reconnect as if it's brand new and I'll get an Eero notification that a new device has connected. It is frustrating to have to continually check the app to make sure it's just my own phone and not something intruding. The Eero devices have a Zigbee hub built-in but my recent purchase of motorized Alexa compatible shades with Zigbee motors had issues. They connected sort of, but were not functioning in the Alexa app even though both Eero and the shade manufacturer said they should work. Eventually I had to also buy 2 older 4th gen Echo's that also have a Zigbee hub built-in, only then would they be found by Alexa and then they started working in Alexa app with voice and scheduling. However, adding the old 4th gen echos created two more issues: While every single other device in my house on other floors away from the Eero 6 Pro can connect just fine because I have 5th Gen Echos in most rooms boosting the mesh coverage, for some reason, the 4th Gen Echo placed on the second floor could not connect to the 6 Pro E router on the first floor. I had to end up buying a second Eero 6 for the second floor to act as a booster up there as well. Only then did the second floor 4th Gen Echo connect to wifi and stay connected. That's very odd because everything else on the second floor and in the basement and detached garage had no issues connecting to either the wide array of 5th Gen Echos or to the main 6 Pro E on the first floor. The second new issue... the Eero devices are set to roam automatically which is the point of mesh coverage. However, the Zigbee shades hated that feature and would constantly bounce from the nearest 4th Gen Echo to the 6 Pro E and back. Each bounce made them "unresponsive" in the Alexa App. Eventually I had to turn off that roaming feature in the Eero app settings so that every device now connects to whichever Echo or Eero it sees first and then stays there. Defeats the purpose of having mesh but it was the only way to make the $2000 worth of "smart" shades actually work with the network and Alexa.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2025

recommand products