SKU: 68570233149
chilean succulents

chilean succulents Echeveria 'Lime and Chili'

Sale price$21.87 Regular price$24.30
Save 10%

Pay in installments of $6.08 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

chilean succulents Echeveria 'Lime and Chili'Echeveria 'Lime and Chili' are part of the Crassulaceae family. Their leaves are green and the tips can become pink and red. In the spring and summer, there can be flowers that range from coral to gold in color that appear. These unique, beautiful plants would make a wonderful addition to your garden. Care Tips Light: These plants require bright light but avoid direct sunlight most of the time so the leaves dont get damaged. Water: The watering method

Echeveria 'Lime and Chili' are part of the Crassulaceae family. Their leaves are green and the tips can become pink and red. In the spring and summer, there can be flowers that range from coral to gold in color that appear. 

These unique, beautiful plants would make a wonderful addition to your garden.


Care Tips

Light: These plants require bright light but avoid direct sunlight most of the time so the leaves don’t get damaged. 

Water: The watering method is very important to keep your plant healthy. It should not sit on the water, and an excess amount of water should be avoided. The best way of watering is using the soak and dry method. 

Soil: Only need to ensure that the content of granular soil is more than 50%. In general, you can use the ratio of charcoal soil, perlite and coarse river sand mixed, and then add some well-rotted organic fertilizer to the soil as a base fertilizer.

Potting: It is recommended to use ceramic pots. Ceramic pots have a certain degree of permeability. Clay pots lose water too quickly, and plastic pots tend to retain water for too long and permeability is poor. 

Temperature: Suitable temperature is 50-77°F (10-25°C). General indoor temperatures are appropriate.

Humidity: They grow well in average household humidity levels when grown indoors. Normal household humidity is good for this plant. 

 

Shipping & Handling

    • The 2 Inch Echeveria 'Lime and Chili' plants are shipped with the pot and soil
    • The 4 Inch and larger plants are shipped bare roots without the pot and soil:
    • You will receive a very similar plant to the one shown in the photos; shape and color may vary
    • Ship within USA & its outlying territories only
    • Please visit Order Processing & Shipping info page for additional details

     

    Care Instructions

    Please visit our Succulent Care info page for more details.

    To ensure the health of succulents, it is important to plant them in porous, well-draining soil. Succulents require little watering, but don't like to sit in wet soil. To create an adequate cactus mix, simply add pumice, perlite, or grit to cactus soil to provide the proper drainage.

    Make sure to leave drought periods between waterings to prevent the plant from water-logging.

     

    Weather Conditions

    • When ordering, be mindful that living succulents can be damaged by the cold weather.
    • If you live in an area that is below 40 degrees Fahrenheit, please add a shipping warmer to your order or consider purchasing plant until the weather is more suitable.
    • Shipping Warmer: 72+ Hours Heat Packs available for $1.7 each
      Shipping Notes
      • Free Standard Shipping on $100+ Orders to the USA.
      • Except Preorder products are shipped in 48 hours.
      • Delivery to the USA:
      1. Standard Shipping : 3-10 business days
      • If time is of the essence, please consider selecting expedited delivery for faster service.
      Exchange/Return Notes
      • We offer a 30-day return/exchange service after receiving.
      • Final sale items are not eligible for returns or exchanges.
      • To process your return/exchange, please contact us at [email protected]
      • Please click here for more details>>> Return & Exchange Policy
      SKU: 68570233149

      Discover Niche Categories That Outsell chilean succulents

      Top-Converting Item to Boost Your Average Order

      4.8 ★★★★★
      Based on 18 reviews
      Sort
      Highest Rating
      Newest First
      Oldest First
      Product Reviews
      A
      Verified Purchase
      AmazinFrank
      Waukegan, US
      ★★★★★ 5
      Very good product at a fair price
      Model: SLH20025
      Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on April 19, 2026
      E
      Verified Purchase
      Eric Caldeira
      Charlottesville, US
      ★★★★★ 5
      I wish I had Siless 20 years ago!!!
      Model: SLH20025, Model: SLH20025
      I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on September 21, 2025
      M
      Verified Purchase
      Mark Kadrich
      Boise, US
      ★★★★★ 5
      Works well and is easy to install.
      Model: SLH20025, Model: SLH20025
      I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on April 13, 2025
      J
      Verified Purchase
      Josh
      Natrona Heights, US
      ★★★★★ 5
      Great product. Best value i could find
      Model: SLH20025
      I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 6, 2026
      W
      Verified Purchase
      william scott
      Chelsea, US
      ★★★★★ 4
      Not simple, nor easy
      Model: SLH20025
      I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 18, 2025

      recommand products