Pay in installments of $7.05 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 19 - Oct 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex aton m installation CYBEX Aton M SensorSafe Infant Car Seat with SafeLock BaseThe innovative technology behind the CYBEX Aton M and SafeLock Base with SensorSafe combination offers easy functionality in a safe and thoughtfully designed infant car seat. This car seat integrates important safety technology into the chest clip of the harness to alert when unsafe situations arise. The alerts are provided through a vehicle receiver and the caregivers smartphone to ensure safety for children in a range of unsafe situations. CYBEX
The innovative technology behind the CYBEX Aton M and SafeLock Base with SensorSafe™ combination offers easy functionality in a safe and thoughtfully designed infant car seat. This car seat integrates important safety technology into the chest clip of the harness to alert when unsafe situations arise. The alerts are provided through a vehicle receiver and the caregiver’s smartphone to ensure safety for children in a range of unsafe situations.
CYBEX Aton M SensorSafe Infant Car Seat with SafeLock Base Features
- SensorSafe Technology: Originally developed to help prevent the rising number of infant hot car deaths, SensorSafe will chime through the installed vehicle receiver to alert when a child is still secured in the back seat after the car has been switched off.
- Adjustable Headrest: Adjustable 11-position height adjustable headrest with a no-rethread harness for protection that grows with your child for optimal comfort and safety.
- XXL Canopy: Extendable XXL foldaway sun canopy with a UPF 50+ rating provides a cozy environment for naps on the go.
- Smart-tech harness chest clip with SensorSafe provides alerts when unsafe situations arise in the back seat
- Side-impact Protection absorbs up to 25% more impact forces in a collision* (*when compared to the same car seat without L.S.P. extended)
- 11-position height-adjustable headrest with no-rethread harness
- Energy absorbing shell helps reduce the forces felt by the baby in a collision
- Extendable XXL foldaway sun canopy with a UPF 50+ rating
- European belt routing provides safe installation without a car seat base
- Removable newborn insert provides support from 5 lbs. to 11 lbs.
- Travel system ready with CYBEX and other strollers using car seat adapters
- Included SafeLock™ Base features an anti-rebound design, a LATCH system and height adjustable load leg for extra stability and safety
- Designed and engineered in Germany
Specifications:
- Measurements: L 26 x W 17.3 x H 15.4 – 22.25 inches
- Weight: 10.9 lbs. (without base), 23.3 lbs. (with base)
- Use from Birth up to 30 inches tall and 35 lbs., following the directions in your user manual
- Carrier Weight: 10.9 lbs
- Base Weight: 12.4 lbs
- Usage Age: Birth to 35 lbs
- Child Height: Up to 30"
How SensorSafe™ Works:
Originally developed to help prevent the rising number of infant hot car deaths, SensorSafe will chime through the installed vehicle receiver to alert when a child is still secured in the back seat after the car has been switched off. This reminds the caregiver to act quickly, but if the child is still secured after several minutes an alert will be sent to the caregiver’s cellphone through the downloaded app. If the situation is still not remedied, the designated emergency contact will receive an alert with the GPS coordinates of the vehicle’s last known position. This state-of-the-art safety technology is designed so there is no need to reinstall each time you drive - just keep the receiver plugged into your car’s OBD port to drive with that extra peace of mind.
- Chimes through the installed vehicle receiver if child is still secured in the seat when the car is switched off
- Alerts through the caregiver’s cell phone if the child is left behind in the vehicle and then alerts the designated emergency contact if the situation is still not remedied
- Emergency contact receives GPS coordinates of the vehicle’s last known position
- Alerts through the vehicle receiver and caregiver’s smart phone when the child has unbuckled themselves while the vehicle is in motion
- Monitors the back seat temperature to alert through the vehicle receiver and the caregiver’s smart phone when the back seat appears to be too hot or too cold for the child’s comfort
- Provides warnings to the caregiver when the child may have been seated for too long and needs a break
- Receiver plugs directly into your car’s OBD port and syncs with the caregiver’s cell phone
- Only one install needed if receiver is kept plugged into vehicle’s OBD port
- Helps to prevent misuse by providing guidance on installation, how-to videos, FAQ’s, direct link to customer service and more through the SensorSafe app.
- App can monitor up to 16 chest clips on a single platform
- App download available for Android and IOS
- Anti-rebound design reduces car seat rebound movement by nearly 30%
- Highly visible indicators change color when the car seat and load leg are properly installed
- Height-adjustable load leg stabilizes the car seat and can reduce crash forces up to 40%
- One-hand release buttons for easy removal of the car seat from the base
- Dual Level Indicator ensures the infant car seat is reclined at the proper angle
- Unique belt tensioning system offers simple and secure LATCH and vehicle seat belt installation
Specifications:
- Measurements: L 26.3 x W 15.4 x H 13.9 inches
- Weight: 12.4 lbs.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 2
Usb-c passthrough started failing about a year into ownership.
This had the potential to be the perfect accessory for my M4 MacBook Air. It is very difficult to find dongles like this that support display passthrough via usb-c (meaning that if you have a usb-c display you can connect it to this and use the display). When it did work, I was able to power a triple monitor setup with my 2 port Macbook Air (with one display being driven by a displaylink adapter).
If this product had continued to work as advertised, is would be a 5 star review.
But after maybe a year of VERY sporadic use (I use this maybe once a week because my MacBook Air is not often docked) the usb-c passthrough is already failing. On a display I use every day with a different machine (a 16" MBP that has enough ports to not need any adapters) and the display and cable work perfectly fine there so I can only assume that it is this specific adapter which is failing. If I insert the connector several times, sometimes I can get it to work but my success rate just keeps dropping. There was no other reason to spend this much on an adapter that without usb-c passthrough offers just 3 usb-a ports like most much cheaper adapters. So to say I am disappointed is an understatement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 4
Expensive, but it works
The good parts:
Yup, this works with DP alt mode, single cable use works for most devices I tried (steam deck, laptop, odin mini 2) even without the hub powered through the power in on the hub, I even got it working without external power to either the hub or my small usb-c monitor. However, some devices like my phone likely didn't give enough power for it to work without another power source. On my phone it worked for some usb devices without external power, but the dp alt mode didn't do work. DP alt on my phone works just fine with external power connected to the hub. Powering it with a small but powerful power bank worked fine, but lower power power banks might not keep up especially if the monitor isn't getting it's own power. It only takes a watt or two of power for the hub itself from some quick and dirty measurements charging my laptop through the pd-in on the hub.
As for the rest of it, the three usb 3 ports means you should be enough to get by for any use case, though you may need more dongles or adapters to get the type of connections you need, but quite usable as-is for a lot of purposes.
Basically it does what it says, there really is no other hub currently that can do pd alt mode, only big docks which need power supplies.
The ok parts:
*When it isn't powered* I noticed that with a monitor already plugged in, plugging it into a device would lead to the monitor not being initialized. But plugging the hub into the device first before connecting the monitor worked. No issue when it was powered. You can use this to get display out and charge with a Nintendo switch, but if it's not powered through the pd-in it probably wont switch to TV mode and output video, not sure if that's because of power or software reasons.
This is a nitpick, but if you care about the feel or aesthetic it's noticeably bland. The case is plastic and there seems to be no weighting on the inside, it's very light, which can feel cheap but it's not like adding weights would functionally make it better, the case also has a bit of a harsh feeling where it's joined, but it does feel solid and durable enough. It's clearly function over form, just barely meets the minimum bar imo.
The bad part:
You already saw, but the price is a bit steep for a hub (at $80). I'd love to see it at 60 or even 40 instead, I hope more similar hubs pop up for competition.
In summary:
It does what it says, if you know you want this and what it is then get it, I feel like it shouldn't cost this much, but it's quite usable and for now it's the only option for a DP alt mode hub.
Minus a half star each for subpar presentation and price 4/5
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 4, 2024
★★★★★ 5
Great for AR Glasses
This USB hub has been great for me! It's taken me so long to finally find a stable setup to allow using my XREAL Air glasses, peripherals, and charger at the same time. I've used this both with my phone and ROG Ally and I have not once had a problem. I even found that my ROG Ally manages to get the full supported PD of 65W, as long as I power the hub with a 100W PD charger. That said though, using a 65W PD charger is still more than adequate to charge the device while using various peripherals and a USB-C display.
Previously I used USB-C hubs with HDMI out and another device to merge the HDMI output with a USB-A connection into a single USB-C cable that I use for my AR glasses. This setup worked, but would increasingly stutter/freeze the longer I used it forcing me to constantly unplug and re-plug it in. In trying to find a solution that didn't split and merge back the display signal with USB data/power, this hub was the only one I found that wasn't thunderbolt 3/4.
I will say that I wish the cable to the host device was either longer and less rigid, or shorter with an optional extension cable. An ethernet port would have also been nice, but using up one of the USB-A ports with a USB ethernet adapter works if needed. Plus, if I wanted ethernet with it, then a dock would probably have been a better option over a hub anyway.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2023
★★★★★ 5
One of the only dongles that supports a usb-c display (alt mode) AND Power Delivery!
If you are like me and have laptop that only has a couple of usb-C ports (one of which has to be used for charging), but want to free up a port, this is the ONLY dongle I have found that does the job flawlessly AND affordably. The dongle has a usb C port. for power delivery as well as a second usb C that not only supports data, but has the necessary specs to support a usb C monitor (via DP alt mode).
This is only dongle I have come across that has the necessary hardware to support a usb C monitor for less than 100 bucks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2024
★★★★★ 5
(Steam Deck Verified) Works like a charm on Dual QHD 2560x1440 (1440p)
This could be one of those reviews where I tell you how well this works for work Zoom Meetings and the Monthly TPS Excel reports. But my primary concern was the Steam Deck my secondary concern was being able to see more work. Luckily it worked for both.
The Steam Deck is capable of pushing to both 1440p monitors without any issues. I don’t have many AAA games, but if it helps: Hogwarts Legacy ran at full speed on auto detect (medium) graphics. No ghosting, no tearing, no lag. I tried No Man Sky for something with very high particle and blooming. Still ran like a champ. Mafia Definitive Edition runs like Estes Kefauver at a meeting of Murder Incorporated. If it runs on the Steam Deck this hub can push it… Remember my monitors are only QHD 1440p.
One laptop worked amazingly. 1440p Zoom Calls, Excel Spreadsheets as far as the eyes could see. BOTH EMAIL AND CHAT OPEN ON THE SAME SCREEN!
*Car salesman roof slap*
This baby has so many pixels.
The other laptop didn’t support video over USB-C nor Power Delivery. The USB hub worked very well as a USB hub though.
The USB ports are all fast and reliable. My USB 3.x devices have varying speeds. I don’t think any device measured the full through put, but given the equipment I have to work with (it could be the equipments fault) I am happy with a 4.8 out of 5.
Using the power delivery port on this hub will allow you to charge attached devices. Steam Deck charges, Laptops with USB-C Power Delivery charge. Laptops without power delivery will not charge.
The ports with pictures of keyboards, please plug your USB Keyboard and Mouse in these ports. These ports are USB 2.0. They will run slow if any other devices are plugged into them.
If your device does not support Thunderbolt, Alt HDMI, or Displayport over USB-C, You will not be able to use the video ports.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2023