3m pothead 3M Performance Pressure HVLP Atomizing Head Refill Kit 26820, Red, 2.0, 10 pack

3m pothead 3M Performance Pressure HVLP Atomizing Head Refill Kit 26820, Red, 2.0, 10 pack3M Performance Pressure HVLP Atomizing Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure feed applications using the 3M Performance Spray Gun, offering like new spray performance with the change of each nozzle. What makes the 3M Performance Spray Gun system different is the technology inside the quick

3M™ Performance Pressure HVLP Atomizing Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure-feed applications using the 3M™ Performance Spray Gun, offering like-new spray performance with the change of each nozzle.

What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomizing head – it's like getting a brand-new spray gun every time you swap the nozzle. Get the pattern control, atomization and transfer efficiency you expect from a premium spray gun – all while helping to drive more consistent spray performance across each job, every day.

3M™ Performance Pressure HVLP Atomizing Head Refill Kits are available in sizes 0.9, 1.1, 1.4, 1.8 and 2.0 atomizing heads for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats.

The replaceable nozzles are used exclusively with the 3M™ Performance Spray Gun system and attach to a supply hose for continuous, bulk spraying from a pressure pot or pressure tank. The atomizing heads attach to the 3M™ Performance Spray Gun whip hose and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.

Specifications:

• 2.0 mm atomizing head nozzle size (Red)
• Disposable pressure atomizing head nozzle type
• 10 atomizing heads per pack
• Fluid Inlet – ¼” NPS (BSP)
• Nozzle rotates for vertical and horizontal spraying
• Quick-change nozzles in sizes 0.9, 1.1, 1.4, 1.8 and 2.0 for spraying a wide range of industrial and automotive coatings
• Nozzles attach to the spray gun and whip hose easily without the need for additional tools
• Like-new spray performance with each new atomizing head
• Excellent pattern control, atomization and transfer efficiency
• Use exclusively with the 3M™ Performance Spray Gun
• Recommended air inlet pressure is 18 psi (1.24 Bar) for pressure feed
• Required atomizing air volume is 13 cfm
• Weight – 8.7 oz (per 10 pack)
• Part Number 26820, 3M Stock # 7100271256 (Previous 3M Stock # 60455114748), UPC 00051131268203

Nozzle Recommendation Chart - Pressure

(Starting points only, refer to Paint Manufacture for recommendation on fluid tip size.)

Information:

3M Performance Spray Gun HVLP - Industrial Quick Start Guide

3M Performance Spray Gun HVLP - Technical Data Sheet

3M Performance Spray Gun HVLP - Spray Gun Manual

3M Performance Spray Gun HVLP - Tips & Tricks

Please note that the 0.9 mm (26809), 1.1 mm (26811), 1.4 mm (26814) and the 1.8 mm atomizing heads (26818) are sold separately in 10 packs as well.  The spray gun and nozzles should not be immersed in cleaning solvents or gun washers.  The maximum recommended operational air inlet pressure of this HVLP spray gun is 18 psi.  For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual.