Pay in installments of $5.44 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 20 - Sep 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
lockup herbicide label Lebanon ProScape 0-0-7 Fertilizer with LockUp Broadleaf Herbicide — 40 lbClean up broadleaf weeds and strengthen your turf with ProScape 0 0 7 LockUp. Target visible weeds while delivering potassium that helps your lawn handle heat, foot traffic, and dry spells. Spread the granular weed control in minutes and keep your yard looking even, green, and ready for weekend plans. Key Features 0 0 7 analysis: Feed essential potassium to support stronger blades and better stress tolerance. Selective broadleaf control: Tackle common
Clean up broadleaf weeds and strengthen your turf with ProScape 0-0-7 LockUp. Target visible weeds while delivering potassium that helps your lawn handle heat, foot traffic, and dry spells. Spread the granular weed control in minutes and keep your yard looking even, green, and ready for weekend plans.
Key Features
- 0-0-7 analysis: Feed essential potassium to support stronger blades and better stress tolerance.
- Selective broadleaf control: Tackle common lawn weeds without harming established turf when used as directed.
- Post-emergent action: Treat weeds you can see for faster visual improvement.
- Granular convenience: Cover large areas evenly with a standard broadcast or drop spreader.
- Phosphorus-free formula: Stay within local P restrictions while you improve lawn resilience.
- Versatile use: Use on most cool- and warm-season lawns around your home or shop.
Applications
Apply to established turf when weeds are actively growing. Hit problem patches or treat the whole lawn for a consistent finish. For best results, apply to slightly moist grass so granules stick to weed leaves, then follow label timing for watering and mowing.
Specifications
- Product type: Granular lawn fertilizer with selective broadleaf weed control
- Nutrient analysis: 0-0-7 (potassium for stress and color)
- Form: Uniform spreadable granules
- Application equipment: Broadcast or drop spreader
- Use sites: Residential and commercial turf (established lawns)
- Coverage: Varies by rate; see label for guidance
Check your spreader settings on a small test area, then make a steady pass pattern to avoid stripes. Always read and follow all label directions for timing, reentry, and watering.
Restricted-use product notice: Contains federally regulated pesticide active ingredients. Follow all EPA label directions. Applicator is responsible for compliance with state and local regulations.
What Do the Numbers 0-0-7 Mean?
Every fertilizer label shows three numbers — the NPK ratio. They list the percentage of three nutrients in the bag, always in this order: Nitrogen (N), Phosphorus (P), and Potassium (K).
- Nitrogen (N) drives leafy top-growth and deep green color.
- Phosphorus (P) builds strong roots and helps new seed, sod, and transplants get established.
- Potassium (K) toughens plant cells for stress tolerance — heat, cold, drought, foot traffic, and disease resistance.
This bag is 0-0-7 — meaning roughly 0% nitrogen, 0% phosphorus, and 7% potassium by weight. Zero nitrogen and zero phosphorus means no top-growth surge and no mowing spike — this product's main job is broadleaf weed control (via the LockUp herbicide), with a light potassium feed to help your lawn handle summer stress.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 27 reviews
Sort
Product Reviews
★★★★★ 5
Affordable and reliable!
Color: Silver
This is an awesome Espresso machine!!!! Small footprint, and frothing has no match!!! I really enjoy making coffee with it and I strongly recommend it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Very impressed, perfect shot of espresso with exceptional creme, compact, excellent value.
Color: A-Silver, Color: A-Silver
I am **very** impressed with this sleek, espresso machine. The Casabrews 5418 PRO is phenomenal and such a great value.
The pros and cons are very well set out by Neo Pam in her review of December 8, 2025.
The machine heats up almost instantaneously and brews a perfect shot and double shot of espresso. It is very easy to use and clean and the instructions are helpful. I really like the compact size.
Note that I drink almost exclusively espresso so I make no comment on the steamer other than to say I tested it and it produces copious amounts of very hot steam. Be careful in pushing the wand back--it gets very hot.
This was a great purchase and I enjoy it every morning!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
★★★★★ 5
Fast and Easy! Great Taste!
Color: A-Silver
This is my first espresso machine. The first thing you should know is to select the right beans -- especially if you choose the bottomless portafilter (optional, but recommended.) I bought a bag of Starbucks non-espresso dark roast beans, and it couldn't get to the espresso pressure in the bottomless filter; those beans are too oily for espresso. Their dark roast espresso beans work great, though.
Here's why this is the best Casabrews machine (in my opinion.) The "Flash heat" tech is ready to brew FIVE SECONDS after hitting the power button (feels more like 3.) There are machines that take anywhere from 30 seconds to about 20 minutes to heat up. I don't know about you, but I don't like waiting. This same tech is ready to froth milk 5 seconds after brewing. You can't froth at the same time, but you're already potentially on your daily limit of caffeine while your "friends" are still waiting for their clunky machines with double boilers to warm up..!
I've used mine daily since late November. If you have hard water, you will have to descale more often (I've done it once so far.) In my case, I use a Kangen filter on the 11.5 (alkaline) setting. This causes faster buildup, but the taste is worth it, and I've always used 11.5 pH for all coffee--drip and Keurig.
I use 17.5g of those Starbucks beans -- different beans may require different amounts. If you overfill the basket, you will get more steam and dripping. If you underfill it, you won't hit espresso pressure and it will taste weak and sour due to underextraction. I prefer tending toward overextraction. This could cause some bitterness, but that's easily-fixed by adding a few pinches of salt (I use Himalayan Sea Salt) or some almond milk. The punch and complexity are worth it, though -- it's the SOUL of the beans! ⚡😍🤩💪🏼
I've also used preground espresso, but it won't be quite as strong. That works fine with the pressurized double basket that comes with this machine -- but it won't reach pressure with the bottomless basket. The long-ground grains have lost their potency. I drink this if it's already early evening or later--so I could actually SLEEP!
Two things you'll want to get right away are a WDT tool (a bunch of needles like a long comb) and a "knock box" (where you tap the filter to remove the leftover coffee puck.) I 3D-printed a knockbox from Thingiverse.com Make sure you select enough infill and 4 walls because it'll have to take a lot of abuse. It also helps to have a dosing funnel (also 3D-printed from there.) Any concerns about food grade stuff is addressed by either buying PET-G food grade filament or wet-sanding (which I opted for.) The WDT tool breaks up the coffee clumps, and you'll want to stir it down and into the arcs of the filter to prevent sputtering, uneven flow, and bad espresso.
I also have a 3D-printed distributor--but many consider it unnecessary. I like it because it helps to center the grinds and then I tamp it down (I got an aftermarket tamper--one that has ridges; it works better than the flat ones.) I have a flat metal tamper, too. I just don't use it.
Making a double takes about 5 minutes--starting from grinding beans, weighing, transferring, stirring, tamping, putting on the included puck screen and attaching the portafilter. After that, you just press the button. I always get 3 streams that consolidate into one, and good crema (a bit of foam.) I use a digital Etek scale (~ $10.)
On scale use... My Etek can measure volume. But there are TWO settings. One is for milk (slightly different density) and one is for water. The one for water is approximately the same as the gram unit setting--as water is 1 gram per milliliter. Make sure if you are leaving it on the milliliter setting that you are using the water one. It has a drop icon. The milk setting has a cup with an "M" on it. You will put too much coffee in if you try to measure it with the milk setting. I found that out recently, as I was not aware of the separate setting for milk. So LIVE and LEARN! 🤓📈📊
If the machine gets accumulated mineral deposits, I take a straightened paper clip and carefully (VERY) insert into the hole in the mounting plate. I then run 2-3 doubles without the portafilter. If it gets more far-gone, I use citric acid (1 tablespoon per liter of water.) You could buy some descaling powder from a dollar store, but I think citric acid is more economical. I use it on my Kangen machine which is why I had it. You will then want to run a few cycles of doubles through to get rid of any aftertaste. You might be tempted to use vinegar and water. I used that on my Keurig and I had to run probably 6 or more cycles to get the vinegar taste out; I don't recommend it!
Make sure you run some hot water through the frothing tube after each use -- and wipe it down to remove the milk before it gets too solidified. This is done by turning the dial all the way back to the left, having the machine on, and then turning it all the way to the right. After you see the flow is constant (not sputtering or uneven--I watch for about 5 seconds), turn the dial back to the far-left.
That's it! This machine has changed my morning routine. I eat grits and a fried egg with it so I don't bounce off into the stratosphere on a caffeine high. The taste is quite good. I very rarely drink drip coffee (or even use it or the Keurig for coffee) since having this resource.
Being away from home is hard, because it's hard to find good espresso -- especially at those licensed "Starbucks." Those are the ones that just pay to use their materials, but are not the genuine deal.
Let me know how yours works out, how it tastes, and if you have any questions! 💯
Note: I made the video before I started using other tools mentioned, above.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026
★★★★★ 5
A must buy for espresso lovers and limited counterspace
Color: Black
If you want an espresso machine but don’t want to go though the entire massive machines this is the perfect beginning and even moderate espresso maker for you! So much you can do with it, makes a great solid shot of espresso. No concerns so far and fast and easy to learn steps. Recommending this to all our friends and family that are interested
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
★★★★★ 5
Great value for your money!
Color: A-Silver
Yessss! Real espresso maker! Excellent brewing capacity. Easy to use. Made with great quality material. The machine comes with all the pamphlets & easy to read instructions which say to heat twice for extra hot coffee, but honestly the coffee comes out VERY hot & tasty without double-heating. Also comes carefully packaged to prevent damage during delivery. Great value for your money!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2026