SKU: 90051418582
variegated snow queen pothos

variegated snow queen pothos Snow Queen Pothos Single Starter Plant in a 1.5" Pot - Epipremnum Aureum 'Snow Queen' - Variegated Pothos

$23.07 $25.63
Save 10%
No.2 Bestseller on virtipatel.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

variegated snow queen pothos Snow Queen Pothos Single Starter Plant in a 1.5" Pot - Epipremnum Aureum 'Snow Queen' - Variegated PothosThe Snow Queen Pothos, also known as Epipremnum aureum 'Snow Queen' or simply the Variegated Pothos, is a popular and attractive houseplant known for its striking variegated foliage. The Snow Queen Pothos is characterized by its heart shaped leaves with creamy white to silvery gray variegation. The variegation varies in intensity, creating a beautiful contrast against the dark green background of the leaves. What do you get: A similar plant that is in

The Snow Queen Pothos, also known as Epipremnum aureum 'Snow Queen' or simply the Variegated Pothos, is a popular and attractive houseplant known for its striking variegated foliage. The Snow Queen Pothos is characterized by its heart-shaped leaves with creamy-white to silvery-gray variegation. The variegation varies in intensity, creating a beautiful contrast against the dark green background of the leaves.

What do you get:

A similar plant that is in the images in a 1.5" pot.

CARE:

Light: Provide bright, indirect light for your Snow Queen Pothos. It can tolerate lower light conditions but will exhibit the best variegation and growth in brighter, indirect light. Avoid direct sunlight, as it can scorch the leaves.

Temperature: Maintain a temperature range between 65°F to 80°F (18°C to 27°C). Avoid exposing the plant to cold drafts or sudden temperature fluctuations.

Humidity: While Snow Queen Pothos is adaptable to a range of humidity levels, it benefits from higher humidity. You can increase humidity by misting the plant, using a humidity tray, or employing a room humidifier.

Watering: Allow the top inch or two of the soil to dry out between waterings. Water thoroughly when you do water, and ensure proper drainage in the pot to prevent root rot. It's better to underwater than overwater this plant.

Soil: Use a well-draining potting mix, such as a standard indoor plant mix. Make sure the pot has drainage holes to prevent waterlogging.

NOTE: We prioritize the well-being of your plants throughout the delivery process, ensuring meticulous care from packaging to shipment. We promptly notify you once your package is dispatched and vigilantly monitor weather conditions. In the event of any delays necessitated by weather, we keep you informed. If your plant arrives with any damage, rest assured that we're here for you; simply reach out to us, and our dedicated team will provide assistance within 24 hours.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 90051418582

Discover Niche Categories That Outsell variegated snow queen pothos

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1785 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Louisville, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
L
Verified Purchase
Lisa Ryan
Battle Creek, US
★★★★★ 5
Great product
Color: Black, Size: 4 Panel-88''
Literally exactly what I was needing
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
G
Verified Purchase
Grumpy
Grantham, US
★★★★★ 5
It's good...
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
It's good....took about 45 minutes to put together. No issues. Looks great...made the wife happy....
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
N
Verified Purchase
NettyB Variety Shoppe
Omaha, US
★★★★★ 5
Durable non see through fabric
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This room divider is exactly what I need. It is very durable and easy to move around. You can’t see through the fabric. I love it. My reason for purchasing this divider is to use as a divider and as a backdrop holder. And it serves both purposes perfectly. It looks much better in person than on camera. It did have the spots on one side on all of them but in a few days they went away. It foldaway and tucked away easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 14, 2025
B
Verified Purchase
Brittany
New York, US
★★★★★ 4
Great product
Color: Black, Size: 4 Panel-88''
Love the look of this after it’s put together. It’s pretty sturdy and the connecting clips allow you to shape it different if you need it to fit in a corner. We use this at work so it’s great for the space we use it in. A little hard to store because it doesn’t fold up nicely because of the feet on it but I’m happy with it overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026

recommand products

Evenflo EveryFit 3-in-1 Convertible Car Seat
22.92
Evenflo EveryFit 3-in-1 Convertible Car Seat
20.40
Maxi-Cosi Siena CP 5-in-1 Modular Travel System
20.65
Maxi-cosi Siena Luxe Modular Travel System, Travertine
29.58
Maxi-cosi Siena Luxe Modular Travel System, Travertine
29.42