SKU: 91939712290
anthurium crystallinum common name

anthurium crystallinum common name Anthurium crystallinum 'Crystal Hope' – Iridescent Veins Hybrid

Sale price$18.89 Regular price$20.99
Save 10%

Pay in installments of $5.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

anthurium crystallinum common name Anthurium crystallinum 'Crystal Hope' – Iridescent Veins HybridAnthurium crystallinum Crystal Hope Compact growth, dark velvet leaves and bright white venation define Anthurium crystallinum Crystal Hope. The leaves face outward from the crown, so the pale veins remain easy to see even while the plant stays relatively neat in a pot. The plant pairs outward facing leaves and pale venation with thick epiphytic roots that need an airy pot setup. Its crown presents the leaves outward and keeps the plant tighter than

Anthurium crystallinum ‘Crystal Hope’

Compact growth, dark velvet leaves and bright white venation define Anthurium crystallinum ‘Crystal Hope’. The leaves face outward from the crown, so the pale veins remain easy to see even while the plant stays relatively neat in a pot.

The plant pairs outward-facing leaves and pale venation with thick epiphytic roots that need an airy pot setup. Its crown presents the leaves outward and keeps the plant tighter than many large velvet Anthuriums.

Defining features of Anthurium crystallinum ‘Crystal Hope’

  • Compact habit: The cultivar stays tighter than many larger crystallinum-type plants.
  • Outward-facing leaves: The blades are held so the vein pattern is visible from the front and sides.
  • Dark green surface: Mature leaves harden to a deep green, velvety finish.
  • Crystalline white veins: Pale veins create a sharp contrast across the cordate blades.
  • Thick epiphytic roots: The root system needs oxygen around the pot rather than dense, wet soil.

Growth in a compact pot

Anthurium crystallinum ‘Crystal Hope’ forms a tidy crown with leaves that expand outward from the centre. A close-fitting pot helps the root zone dry at a sensible pace, while a chunky substrate keeps moisture moving around the thick roots.

New leaves are soft while expanding and can mark or crease if the air is very dry. Once hardened, the blade becomes darker and the vein pattern looks clearer, especially in bright filtered light.

Care for Anthurium crystallinum ‘Crystal Hope’

  • Light: Give bright indirect light. Strong direct sun can scorch velvet leaves, especially while they are still soft.
  • Water: Water evenly, then allow the upper part of the substrate to dry slightly before the next watering.
  • Substrate: Use a chunky mix with bark, coco chips, perlite and a small moisture-retentive fraction. The roots should never sit in compacted soil.
  • Humidity: Around 60–75% humidity helps the leaves expand without sticking or creasing.
  • Temperature: Keep it warm, ideally 20–27 °C, with no cold draughts around the pot.
  • Repotting: Move up only when the root system needs space. Oversized pots can stay wet too long around the lower roots.

Issues on Anthurium crystallinum ‘Crystal Hope’

  • Smaller new leaves: Often follow root disturbance, low humidity or irregular watering during leaf expansion.
  • Brown margins: Dry air, mineral build-up or repeated drying can mark the fine leaf edge.
  • Root decline: Dense, old or collapsed substrate can stay wet and reduce oxygen around the roots.
  • Speckled new growth: Inspect new leaves for thrips or mites if fresh blades open with scars or pale marks.

Safety around Anthurium crystallinum ‘Crystal Hope’

Anthurium crystallinum ‘Crystal Hope’ contains calcium oxalate crystals and should be kept away from pets and small children. Chewing the plant can irritate the mouth and throat, and sap from damaged tissue can irritate skin or eyes.

Patent and botanical background

The genus name Anthurium comes from Greek words for flower and tail, referring to the spadix. Anthurium crystallinum Linden & André was published in 1873 and is accepted as a species native from Panama to Colombia. The Latin epithet crystallinum means crystal-like or resembling crystal. ‘Crystal Hope’ was patented in 1995 and described as a controlled cross between two crystallinum breeding selections, LV-36 and LV-40, developed in Cartago, Costa Rica by Claude Hope.

Dark velvet blades stay close to the crown, with white veins held clearly across each leaf.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 91939712290

Discover Niche Categories That Outsell anthurium crystallinum common name

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
CH
Dallas, US
★★★★★ 5
Reliable network speed tests and smb speeds
Got this on prime day for about $20 USD. For the price and quality it was definitely worth! Works perfectly and as you would expect. No driver installations or dropped connections so far, just plug and play. Sleek design, gets a little warm (which is expected) but not hot at all. Tested on compatible internal network speeds which showed to be reliable and fast Hardware tested on: - base m4 mac mini connected via usb c ugreen 2.5g adapter - over cat7 ethernet cable (overkill but cat6/cat5e under 100meters/328ft should be enough) - 2.5g ethernet switch - 2.5g port on nas iperf3 tests: - iperf3 tests from base m4 mac mini to another 2.5g device on a 2.5g switch - shows average bitrates of ~2.35 Gbits/sec smb tests from a usb3 connected to base m4 mac mini: - only took ~2mins to transfer 31.31 GB for 11 files in varying sizes - which on average came out to around a transfer rate of 2.087gbps - which is about 260.88 Megabytes per second - i'd imagine this would even be slightly faster for files directly on the mac but wanted to test with a real scenario - probably closer 290-300 Megabytes per second for files stored on the device rather than usb3 have not had a need to test this on mobile yet but iphones with the 10g usbc (and probably just usbc in general) should be fine i'm sure if you're looking into buying one of these you already know all this but some things to keep in mind. your mileage may vary based on your cable length and runs/environment surrounding your network/cables for any electromagnetic interference. but generally as long as you have 2.5gb compatible ports and cabling and you should be good to go!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 11, 2025
P
Verified Purchase
pvinthebay
Bozeman, US
★★★★★ 5
Solid USB-C Upgrade for 2.5GbE - Good Value and Performance - Good for Mac Users
I’ve been using this Ugreen adapter for a 6 months now and it’s become one of my go-to accessories. If you have a device like the M1 MacBook Pro or Mac Mini that’s limited to 1Gb Ethernet, this adapter is a great way to unlock faster speeds, especially if you’re upgrading your home or office network to 2.5GbE. I have everything connected to a 10Gb switch after I upgraded my Synology NAS and needed a way to improve access to it for storage. Setup was truly plug and play, just connect the Ethernet cable to one end, plug the USB-C into your device, and you’re good to go. I noticed an immediate improvement in transfer speeds when moving large files to my NAS. This is perfect for anyone working with media or large data sets where Wi-Fi just doesn’t cut it. I was initially capped at 200MB/s. It more than doubled when I used the adapter to 200MB/s At around $20, it’s excellent value when compared to higher-end adapters that cost much more but often deliver the same result. It’s compact, feels well made, and I’ve had zero issues with performance or stability. It does get slightly warm during long transfers, but I haven’t seen any drop in connection quality or speed. If you’re trying to squeeze more speed out of your Mac Mini, laptop, or even a docked tablet, this is a solid upgrade. I keep mine on the desk and switch it between devices as needed. Highly recommended for anyone moving to a 2.5Gb network or needing faster wired performance.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 27, 2025
W
Verified Purchase
Wes Candela
Lexington, US
★★★★★ 5
MR. SULU… PREPARE FOR WARP SPEED. ENGAGE.
Rocket fast. Sleek, smooth design. Have another adapter from different company, which tends to fail when utilizing more than 1.5 GB. It just decides to downshift the first gear. This adapter does not. Speeds are scary. SpeedTest results are fun, watching the gauge being download teat and swing radically to the right. Pinned. Speeds coming in at 2,327 mb/s uploads at 2,150 mb/s (depending on time of day. Great for streaming content from laptop 4K, Dolby Vision Dolby Atmos, no problems… smooth no hiccups
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
R
Verified Purchase
ROGER S.
Los Angeles, US
★★★★★ 5
Great speed, connection sometimes blocked but there is a solution.
I wanted to take advantage of my 3gb fiber connection, and the best way was to connect my Mac M1 via Ethernet. This looked like a good solution. It started pretty good. I could almost max out my 2.5gb port on my switch. Then a strange thing started happening. At odd, but consistent, intervals, my connection would stop and say it was 'blocked'. If I waited, it would come back to active. If I switched Thunderbolt ports, it would come back instantly. Annoying. After a couple of days trying different ports, cables, DHCP vs static IP, and WiFi working flawlessly, I figured it was something in the Mac. Many Google searches directed me to the Thunderbolt Bridge. Apparently, this feature is to directly connect two Macs together IP for a high-speed connection. But it has been known to cause my issue. I removed the Thunderbolt Bridge service (I can add it back later if needed), rebooted, and have been working great for over a day now. Hopefully, this might help someone in the future.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
S
Verified Purchase
S. A. Hughes
Port Orchard, US
★★★★★ 4
Installation instructions are flaky, but unit works well when installed
I bought this because I wanted a simple way to upgrade an old tower PC to support 2.5gig Ethernet and I thought it would be easy. Well, it wasn't. The user manual that came with the unit had instructions to download drivers. After a lot of work, I found them, but the files were empty. Then I noticed that a new USB device, a CD rom drive, had been added to my PC. I unplugged the adapter and went into device manager and deleted the device and its files. When I plugged the unit back in, it was recognized as a NIC and started working. The unit runs at 2.5gig and seems to work well but I keep wondering if, the next time I have to unplug it, it will go back to looking like a CD drive. Oh, I did not need drivers. The unit is installed automatically under Windows 10.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026

recommand products