SKU: 92442222982
hauck 2 in 1 highchair

hauck 2 in 1 highchair Hauck Alpha Bouncer 2 in 1 - Stretch Grey

$26.96 $29.96
Save 10%
No.2 Bestseller on virtipatel.com >

Pay in installments of $7.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 25 - Aug 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

hauck 2 in 1 highchair Hauck Alpha Bouncer 2 in 1 - Stretch GreyThe Hauck 2 in 1 Alpha Bouncer comes with two functions: it can be used either as bouncer on the included frame or as highchair module for newborns on the Alpha+ wooden highchair (sold separately), allowing your baby to be at eye level and at the heart of the family from day one. The bouncer easily slides onto the side bars of the tilt proof highchair and can be used right away. As a result, your baby will be right next to you and at eye level,

The Hauck 2-in-1 Alpha Bouncer comes with two functions: it can be used either as bouncer on the included frame or as highchair module for newborns on the Alpha+ wooden highchair (sold separately), allowing your baby to be at eye level and at the heart of the family from day one.

The bouncer easily slides onto the side bars of the tilt-proof highchair and can be used right away. As a result, your baby will be right next to you and at eye level, strengthening your bond and making feeding easier. The 3-point harness helps keep your little one safe.

Thanks to the soft cover, the lateral padding and the removable sear minimiser, the Alpha Bouncer offers a safe and ergonomic lying surface – both as bouncer and as highchair module. The soft fabrics make your baby feel comfy at all times. The cover can be easily removed and washed.

Changing from highchair to bouncer mode is very simple: the bouncer can be removed from the wooden highchair with one action and easily slides onto the included frame. By bouncing along your baby’s natural movements, the Alpha Bouncer has a calming and relaxing effect.

FOR NEWBORNS - This snuggly bouncer allows you to use Hauck Alpha+ or Beta+ wooden highchair (sold separately) right from birth.

AT EYE LEVEL - Thanks to this soft bouncer with seat insert you can feed your baby in a back-friendly manner. At the same time, you little ray of sunshine can get all the attention needed at the centre of the family.

SIMPLY LOVELY - Thanks to the soft plush border and seat insert, your little one will feel safe and cozy at all times.

BOUNCER FRAME - Naturally, the Alpha bouncer can be used not only as highchair attachment, but also as fully-fledged bouncer by fixing it on the frame included. The natural movements will calm down your baby who will be more than happy.


     

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 92442222982

    Discover Niche Categories That Outsell hauck 2 in 1 highchair

    Top-Converting Item to Boost Your Average Order

    4.0 ★★★★★
    Based on 15 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    R
    Verified Purchase
    ReluctantConsumer
    Carnegie, US
    ★★★★★ 5
    Creality K1 SE - Prints great with stock settings - needs a side spool mount
    Set name: K2 SE, Set name: K2 SE
    I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on January 21, 2025
    G
    Verified Purchase
    Geoff
    Boise, US
    ★★★★★ 3
    Almost Good
    Set name: K2 SE
    The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 5, 2026
    J
    Verified Purchase
    Joshua McPheron
    Massapequa, US
    ★★★★★ 5
    Assembly Tricks And Tips.
    Color: Dark Grey, Size: 5 Seat
    All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 28, 2026
    C
    Verified Purchase
    Courtney
    Louisville, US
    ★★★★★ 5
    Would buy again!!!
    Color: Dark Grey, Size: 7 Seat
    ⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style! I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over. The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept! I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks. Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together. Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on September 8, 2025
    P
    Verified Purchase
    patrick
    Alexandria, US
    ★★★★★ 4
    An okay sectional
    Color: Dark Grey, Size: 5 Seat, Color: Dark Grey, Size: 5 Seat
    I want to give my honest review of this couch. One significant difference in the actual couch vs the photos here is the back of the couch is actually much thinner than in the photos. It’s made with metal framing that is very thin covered in fabric with no sort of padding. Also, the back of the couch does not angle back far. Which makes the couch pretty uncomfortable, as your back is up at almost a 90 degree angle. The quality of the couch overall is good. It was easy to assemble and I didn’t really run into any issues in that regard. Like others have said. The cushions are quite thin and also not super soft. The couch is also quite low to the ground, so if you’re looking for that oversized super soft couch, this probably isn’t the one. I do love the pull out bed/chaise which is super nice, ans the storage is great too. For the cost of the couch I think the quality and comfort are good. I don’t love it, I don’t hate it.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 8, 2026

    recommand products

    Philodendron Brasil Houseplant with Planter - Medium (4-7" tall) Lavender Planter
    26.67
    Philodendron domesticum variegated
    29.67
    Philodendron Mottled Dragon Variegated – TEG
    20.05
    ‘Green Congo’ Philodendron
    27.30
    Philodendron 'Lime Fiddle'
    24.62