Pay in installments of $6.88 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
firestick succulent dogs Firesticks - Euphorbia TirucalliPlant Description The Firesticks Euphorbia (Euphorbia Tirucalli) is a succulent shrub known for its unique and eye catching appearance. It features upright, slender, cylindrical stems that resemble pencils or sticks. Under ideal conditions, the stems can grow as tall as 6 to 8 feet or even higher. While the stems are typically green, they take on a vibrant red or coral hue in direct sunlight, creating the "sticks on fire" effect. The stems are covered
Plant Description
The Firesticks Euphorbia (Euphorbia Tirucalli) is a succulent shrub known for its unique and eye-catching appearance. It features upright, slender, cylindrical stems that resemble pencils or sticks. Under ideal conditions, the stems can grow as tall as 6 to 8 feet or even higher. While the stems are typically green, they take on a vibrant red or coral hue in direct sunlight, creating the "sticks on fire" effect. The stems are covered with small, deciduous green leaves that fall off as the plant matures.
Growing Conditions
- Sunlight: Firesticks need full sunlight to develop their bright color.
- Soil: Plant in well-draining soil, allowing the soil to dry out completely between waterings to prevent root rot.
- USDA Zones: Best suited for USDA hardiness zones 10 and 11, as this plant cannot tolerate frost or freezing temperatures.
- Handling Precaution: The white sap produced by the plant when cut or damaged can irritate the skin and is toxic if ingested. Handle with caution.
Size and Shaping
Maintaining the size and shape of Firesticks Euphorbia is simple:
- Pruning: Prune with care, especially when managing the plant's size. Wear protective gear, as the plant's sap is toxic and can irritate the skin.
- Shaping: Proper pruning helps maintain its form and encourages healthy growth, keeping it an attractive feature in your garden.
Occasional Blooms
On rare occasions, Firesticks may produce small, inconspicuous yellow or greenish blooms at the stem tips. Though these flowers are not the primary decorative feature of the plant, they can add an interesting touch.
Uses for Firesticks - Euphorbia Tirucalli
This drought-tolerant succulent is perfect for xeriscaping, rock gardens, or adding vibrant accents to your garden. Its low-maintenance nature and striking appearance make it an excellent choice for both indoor and outdoor decor. Use it to bring a pop of color and vertical interest to desert and arid landscapes, rock gardens, and pots.
History
Native to Africa, the Firesticks Euphorbia is part of the Euphorbiaceae family. Over time, it has gained global popularity for its ornamental value, becoming a sought-after choice for landscape designers due to its striking look.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 4
Good product, expensive price, poor adhesive
Premium packaging for a premium device. Useful for IR remote signal delivery with extra functions on the side. Price though is luxury for it’s use. Used this for a Logitech Harmony hub control of an non-smart electric fireplace. Setup is a breeze but only if you’re tech savvy. Highly recommend to watch the YouTube video for information on all it’s application. There a many other cheaper devices similar to this available on Amazon that I could have used for the same application. If you have a need for multiple control within the same vicinity of other devices, this may be more useful for you. However, if you plan on utilizing an IR repeater/extender for only a single device and would like to save some money, don’t buy this one. This device works quite well though. Have had no issues achieving the effect needed. Only four stars due to the poor adhesive on the emitter attachment. As stated earlier, I used this on an electric fireplace with a glass surface. I used the attachable emitter to the front glass sensor where the IR receiver was located on the fireplace. After only one day, the emitter attachment fell off even though I made sure the glass was thoroughly cleaned prior to adhering it. Otherwise a good product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2019
★★★★★ 5
Denon avr ir remote port works great with sewell products
I bought a new entertainment center with glass doors and wasn't getting good signal range with the door closed. Plus i couldnt get a good of line site, since this cabinet was shorter than the orginal, and the location for my avr was further to the left than before and now my line of sight to the receiver was blocked from other parts of the room due to high couch back.
I tried a couple different cheap $10 devices that used stick on transmitters/receiver buttons but they were clumsy and didn't provide me a total solution for my room layout.
Works fantastic with a denon x1800 receiver (and many other models). It works directly with the denon's ir remote port in the back of the avr port. The solution is actually quite simple.
Plug a stereo 3.5 mm male to male plug in the denon ir port in the back of the avr and and the other end to the orange emitter box(puck). The pics are about the size of an oreo double stuff cookie Tuck the orange box/puck away whereever and plug the power in. The box doesn't need to seen or be pointed towards anything. It's location is only limited by the length of your stereo cable and access to AC power
Put the blue box puck anywhere in the room where you have general line of sight to it from where you will be using your remote, and plug power in. In my case, its sitting on top of one of my tower speakers. From there it clears the back of the couch and can see from the family room, eat-in kitchen area, and the kitchen beyond.
Done.
I didn't need or use any of the included emitter or transmitter cables, though if you dont have a denon, or other brand avr with an ir port to plug into , or also want to hide the blue puck ( in which case attach the included sensor cable), you'll need them. But for denon users with an ir port, you just use the two pucks and their usb power adapters. Simple.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
★★★★★ 1
Worked good then died at six months (Updated)
Worked good for a couple of months, then started to develop a lag between when you pressed a button on the remote, and when the TV would respond. If I moved the speaker blocking the TV’s IR receiver, and pointed the remote at it, it worked perfectly. Add the IR blaster back in and the delay returns. The delay kept getting longer and longer, sometimes 5 to 10 seconds. Then it just died. Would not pass any IR signals, even though the receiver and emitter both had power. Tried rebooting, changing communication channels to no avail. Out of Amazon return window. Manufacturer wants you do go through a troubleshooting process for warranty that is too complicated and time consuming. Customer Service Rep at Sewell send me a warranty replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2025
★★★★★ 5
Nice Product and Customer Service
I ordered this BlastIR Wireless Pro IR Repeater from Sewell to replace a wired version of an IR repeater from another company. We have moved our TV on to a wall location and are in the process of hiding all the wiring out of sight behind walls and/or in a cabinet. We still have some wires to go, but this product has enabled us to eliminate the IR wiring all together. It's a real improvement in both looks and performance over the cheaper, wired version we originally tried.
The BlasterIR's Receiver is the component that faces the room and receives the IR signal from our remote controls. It's small enough to fit in the space between our sound bar and the bottom of the TV. It's range is great for our room size (about 22' long and 18' wide) and picks up the remotes signal from a side angle that's almost parallel to the TV itself. The receiver is powered through one of the USB ports integrated into the TV (although the device itself supports either a USB or regular plug-in option). I haven't used them yet but Sewell appears to have provided a few options to help with affixing the IR devices in their final positions including some adhesive pads and a magnetic pad option as well.
I'm still playing around with the permanent placement of the IR Blaster Emitter. It sits inside a closed cabinet and faces the concealed cable box receiver, router and DVR components. It retransmits the various IR signals it receives from the IR receiver by blasting that signal to anything it faces. I just placed it in the cabinet about 5" away from the devices I wanted to control, plugged it in and it worked with no other set up.
So far the BlastIR is working seamlessly and with much better function response time than the cheaper IR version we'd tried at first. The lag time between when a button is pressed on the remote control and the action taking place on the device I'm communicating with is minimal. The emitter itself is plugged into an outlet on a surge protector powering the other in-cabinet devices, although it too could be powered via the provided USB connection if desired.
As a note, we did experience a shipping issue during our ordering process. The order it self was processed quickly and shipped in a timely manner. However, there was an issue with our actual receipt of the product and the USPS who reported it delivered to our mailbox when in fact it had not been. Regardless, we reached out to Sewell directly and they quickly resolved the issue for us with no problems and in a timely manner. I would recommend both this IR Blaster Pro product as well as Sewell as a trusted company itself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021
★★★★★ 3
Does NOT Transmit Through Walls
Quick and easy setup! Works great within the room. However, will not work effectively between walls (i.e. - AV closet to living room).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026