SKU: 95055524946
dahlias seed to bloom

dahlias seed to bloom Dahlia 'After Dusk'

Sale price$24.06 Regular price$26.73
Save 10%

Pay in installments of $6.68 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

dahlias seed to bloom Dahlia 'After Dusk'Add a touch of elegance to your garden with this stunning waterlily form dahlia that features a rich burgundy hue and a soft, velvety texture. Its deep bronze green foliage also adds a unique charm to your outdoor space. Plant Height: 3' Bloom Size: 3" SPRING SHIPPING: from mid April through May FALL SHIPPING: from late October through mid November EARLY SHIPPING SERVICE FEE: $14 thermal protection + courier upgrade https: lilysgardenstore. com

Add a touch of elegance to your garden with this stunning waterlily form dahlia that features a rich burgundy hue and a soft, velvety texture. Its deep bronze-green foliage also adds a unique charm to your outdoor space.

Plant Height: 3'

Bloom Size: 3"

SPRING SHIPPING: from mid-April through May
FALL SHIPPING: from late-October through mid-November

EARLY SHIPPING SERVICE FEE: $14 thermal protection + courier upgrade
https://lilysgardenstore.com/products/early-shipping-request

Country of origin: Canada

Tuber Count: 1

Plant Type: Tender perennial (dig out after first frost for overwintering, or treat as an annual)

Light Requirement: Full Sun

Blooms: Summer to First Frost

Plant Spacing: 12-18"

Plant Staking: Highly recommended due to height 

Planting Information:

Dahlias are shipped as single tubers with minimum one eye guaranteed per tuber. If you are not able to plant the tubers upon arrival, store in a cool, dry, dark location.

Plant Dahlia's after the last Spring frost and soil has warmed to 15°C (60°F). Pick a well drained, rich, organic flower bed or planter to plant into. Loosen the soil to a depth of  30 cm (12")  before planting.  Add compost and all-purpose granular fertilizer to the planting area and mix well. Dig a hole and plant the tubers, keeping the stem(s) or sprouts upright. The top of the tubers, where the sprout emerge, should be positioned 3-6" below the soil surface when the hole is filled in. Fill in around the tuber, firmly pressing down the soil so it is even with the surrounding ground, and water well.  Make sure there are no air pockets in the soil.  If planting in a container, ensure there are adequate drainage holes.  

Tips:

- To get a jump start to the flowering season, you can plant the tubers in pots indoors 4-6 weeks before transplanting into the garden. Once the shoots appear, please provide ample light with indoor grow lights or south-facing window. 

- When the plants are 30 cm (12") tall, pinch off the top of the main stem.  This will stimulate branching producing more stems and flowers.

A common mistake when growing dahlias is to overwater tubers you have just planted.  Too much water at this early stage can lead to rot. Water once when you first plant the tuber, then wait until you spot the first sprouts before watering again.

To prevent disease, keep the foliage of dahlias as dry as possible. Water deeply once or twice a week, allowing the 2.5 cm (1") top of soil to dry out in between waterings. 

- Dahlia plants will benefit from supplemental organic water-soluble fertilizer every 3-4 weeks until September. Stop fertilizing in September to promote better overwintering of tubers.

- It is important to deadhead (remove wilted blooms) to encourage new buds, otherwise the plant will stop blooming and will focus its energy on seed production. Trim spent dahlia blooms with clean sharp garden scissors just above the point where the flower stem intersects with a leaf. 

- Cut blossoms liberally for indoor flower arrangements to encourage more branching and flower production. Despite a relatively short vase life, dahlias make gorgeous bouquets.

- Dahlias do not propagate reliably from seed, so if you'd like to keep and multiply your dahlia stock, make sure to dig up the tubers in fall.

- Dahlia tubers can be lifted for winter storage at any time, as long as the plant had been growing for over 120 days.

Overwintering:

- In fall, after the first frost has blackened the foliage, cut off all but 2 to 4 inches of top growth, and carefully dig tubers without damaging them. Allow to dry for a few days in a frost-free location, out of direct sunlight. Once dried, remove any excess soil, leaving 1 to 2 inches of stem. Store each clump of tubers in a ventilated box or basket. Fill the box with peat moss, clean wood shavings or vermiculite and place it in a cool, dry location. Saran wrapping individual tubers is also a great overwintering option, recommended by American Dahlia Society.

- Optimal temperature for overwintering is +4.4C-10C (40F-50F). Don't allow your tubers to freeze as they are extremely cold sensitive. If temperature is too warm however, they may start to sprout in storage.

- Maintaining proper humidity is crucial. If stored wet, tubers will mold and possibly rot. If they are stored too dry, they will shrivel up and may die. A little shriveling is perfectly normal and won't affect the viability of the tubers. 

- Check tubers periodically through winter for rotting and drying out. If the tubers appear shriveled, mist them lightly with water. If any start to rot, trim the rotted portion of the clump so it won't spread. The tubers are fragile, so be careful when handling them.

- When warm weather arrives, you can plant the overwintered tubers and begin the growing cycle again.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 95055524946

Discover Niche Categories That Outsell dahlias seed to bloom

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Grantham, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Massapequa, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
V
Verified Purchase
Val
Charlottesville, US
★★★★★ 5
True to Description
Color: Black, Size: 4 Panel
Love it!! I bought it for privacy while the nurse is dressing my dad. There were several colors black matched the decor . It blocked the sunlight and street lights. Durability and quality very good. Easy closure when not in use. Lightweight. No assembly needed
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
C
Verified Purchase
Clockworks
Houston, US
★★★★★ 5
Nice room divider!
Color: White, Size: 8 Panel
The white panels are a nice off-white color. shipped in perfect condition. Already assembled so set up was quick. We use them to separate a photo studio from the main entry. Easily covers a 6 Ft. opening to the room. They are a woven material with wood colored sticks to support the weave. They are about 6 Ft. tall at the top of the curved section but less at the hinged sections. Light and easy to set up and take down. We are straddling two different floors so the extended legs at the bottom make this easy. Not sure how to clean them but they look great so far!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2025
R
Verified Purchase
Rockermom
Louisville, US
★★★★★ 5
Instant Privacy
Color: Beige, Size: 8 Panel
Bought this to separate a ground level living area used as an office. Works well to cover visual clutter; allows a clean look when entering the front door. Comes fully assembled. Hinges are sturdy enough, as long as the panels aren’t stretched too far; have to allow some bend between them. For the price point, quality and functionality are satisfactory.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 22, 2025

recommand products