SKU: 95492266010
diy plant moss pole

diy plant moss pole Demi D-Shaped Moss Pole Kit | Engineer-Designed in UK | Mythos3Design Basic Kit - 2 sections - Base

Sale price$24.19 Regular price$26.88
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

diy plant moss pole Demi D-Shaped Moss Pole Kit | Engineer-Designed in UK | Mythos3Design Basic Kit - 2 sections - BaseDesigned to be easy for everyone to get into moss poles, with no fiddly assembly. Drip cap comes as standard. Perfect for plant parents just starting out with moss poles, this pole requires no assembly, just slot in new sections and fill with moss as your plant grows. This kit also comes standard with our SlowDrip caps to help make your moss poles more self watering. Engineer Designed & Made in the UK We created Mythos3Design because we were

Designed to be easy for everyone to get into moss poles, with no fiddly assembly. Drip cap comes as standard.

Perfect for plant parents just starting out with moss poles, this pole requires no assembly, just slot in new sections and fill with moss as your plant grows. This kit also comes standard with our SlowDrip caps to help make your moss poles more self-watering.

Engineer-Designed & Made in the UK

We created Mythos3Design because we were frustrated with ugly, scraggly moss poles from garden centres that fall apart. Every pole is engineer-designed to be both aesthetic and well-engineered, then carefully printed and quality-checked by us before it reaches your plants.

  • Full moss pole kit with drip cap as standard. No assembly required!
  • Diamond design in popular colours
  • Slot together for easy assembly (made by an engineer so you don't have to be one).

Top moss pole features

  • Extendable, self-watering moss pole kit with drip cap
  • Zero assembly, perfect for beginners
  • Self-watering with drip cap.

Top moss pole benefits

  • Easy-to-use fully stocked moss pole kit
  • Buildable and extendable
  • Maximising moss volume in this small but mighty kit.

Product specification

The basic kit includes:

  • 3-prong base
  • 2 sections, for an effective moss pole height of 44 cm (17.4")
  • SlowDrip cap, capable of holding about 250 ml of water
  • Pin for cleaning the SlowDrip cap

Diamond face trellis, with clear semi-circular back (half-moon).

This pole can be extended as your plant grows, simply add another section every time you run out of space!

The clear plastic sheet that covers the back of the pole helps seal in moisture, allowing your pole to stay humid longer between waterings. This pole is designed to be easy to put together, and as such is not comparable to our sturdier D-Pole and XXL-Line products, so make sure you add a support bracket to prevent overloading the joints.

Material

The front and joints are made of PLA, and the backing is PETG. PLA is a 100% bio-sourced plastic: it's made of renewable resources such as corn or sugar cane. PLA is also biodegradable and it can be composted. PETG is a 100% reusable material.

Sizing

The standard kit is a dual module kit that includes two single modules that measures 8.5 cm (3.35") in width and 22 cm (8.6") in height, with a depth of 6.5 cm (2.35") to maximise moss volume. So with the standard kit, you are getting 44 cm (17.4") of moss pole when assembled.

Assembly

This pole includes a stake that is designed to be pushed into the soil of an established plant and pot, or you can bury the notches as you pot up a new setup. Keep growing your pole with your plant by purchasing extension kits.

Additional modules can be attached without the use of any tools, with dovetail joints. In the same fashion, the poles may be disassembled for cleaning and reuse if your plant doesn't take to its home. The transparent curved back will allow you to supervise root growth, while retaining moisture for longer.

As hydrated moss can be very heavy, our recommendation is that you use an additional brace if your plant is very heavy, or if you extend your moss pole past the initial kit. 

Small print

Everything we make is printed to order and lovingly squeezed out by our 3D printers at our little workshop, so there may be slight variations and minor visual defects to your products. This is just a standard feature of the production method.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 95492266010

Discover Niche Categories That Outsell diy plant moss pole

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 470 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
sunshine
Belleville, US
★★★★★ 5
Easy of use.
Easy to use for edging driveway. I am not a professional and a senior who is learning to take care of my yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
M
Verified Purchase
Movie Fan
Massapequa, US
★★★★★ 3
Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2022
C
Verified Purchase
Christopher
Belleville, US
★★★★★ 5
Great edger for home use
This WORX 12 Amp Electric Lawn Edger did exactly what I needed it to do. It was easy to use, had plenty of power for cleaning up the edges around my driveway and sidewalk, and gave the yard a much cleaner, finished look. I like that it is corded because I do not have to worry about batteries dying, and it has enough power for regular homeowner use. The first pass took a little extra time since the edges needed cleaned up, but once I got going, it worked great. Overall, this is a solid edger/trencher for the price, and I would definitely recommend it for anyone wanting cleaner lawn edges without dealing with gas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
R
Verified Purchase
rmkd
Bozeman, US
★★★★★ 5
Little work horse!
I LOVE the look of an edged sidewalk. After a few calls to some local landscape companies, I couldn't find anyone with an edger. Crazy! So I bought myself this one! Super easy to put together and just as easy to use. My walk hasn't been edged for many years and was very overgrown. I was nervous that I wouldn't be able to run this thing, but this little work horse did the job for me and did it perfectly. It will be super easy to keep it edged now. Extremely happy with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
B
Verified Purchase
B. Colonna
Birmingham, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020

recommand products