SKU: 42401466539
dress a line pattern

dress a line pattern Ella dress PDF sewing pattern – Silversaga Patterns

$23.43 $26.03
Save 10%
No.2 Bestseller on virtipatel.com >

Pay in installments of $6.51 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 20 - Aug 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

dress a line pattern Ella dress PDF sewing pattern – Silversaga PatternsThe Ella Dress is one of our most beloved designs, known for its softly gathered bust, elegant lines, and graceful movement. The skirt is partially cut on the bias to create a beautiful drape, and the bodice is shaped with thoughtful construction that gives the neckline a close, flattering fit. Choose between two bodice views: View A features the original plunging neckline, while View B offers an adjustable version with a slightly higher cut. You can

The Ella Dress is one of our most beloved designs, known for its softly gathered bust, elegant lines, and graceful movement. The skirt is partially cut on the bias to create a beautiful drape, and the bodice is shaped with thoughtful construction that gives the neckline a close, flattering fit. Choose between two bodice views: View A features the original plunging neckline, while View B offers an adjustable version with a slightly higher cut. You can also choose between three sleeve styles: long voluminous sleeves, short puff sleeves, or flutter sleeves, all with underarm gussets for ease of movement.

Pattern difficulty
The Ella Dress is best suited for intermediate sewists. You’ll need to feel comfortable working with bias-cut pieces, drapey fabrics, and hand-finished details. Key techniques include bias binding, invisible zipper insertion, and setting in the two-part sleeve with gusset.

Fabric suggestions
Ella is designed for lightweight to midweight woven fabrics that offer both drape and a touch of structure. Ideal options include linen, cotton, and block prints. Fabrics with more fluidity, like rayon/viscose or Tencel, will create a softer silhouette.

Fabric usage
Cutting layouts are optimized for fabric 140 cm (55”) wide. We recommend purchasing a little extra to account for shrinkage or print alignment.

Metric (EU34 - EU54):
View A long sleeve: 3.41 m - 4.25 m

Imperial (US2/4 - US24):
View A long sleeve: 3.73 yd - 4.65 yd

Notions and tools
•  56-60 cm (22-24”) invisible zipper.
•  7 mm (1/4”) elastic for long or short puff sleeves.
•  Sewing thread.
•  Sharp fabric scissors or rotary cutter, along with pins, fabric marking pen and a seam ripper.
•  A safety pin small enough to fit into a finished 1 cm (3/8”) channel.
•  Hook and eye for top of zipper.
•  Sharp hand-stitching needle.

Good-to-have tools (optional)
•  A clear plastic ruler, a French curve and tracing paper (for any pattern alterations).

What's included:
•  43 page detailed and easy to follow instructions booklet in English
•  A4/US Letter layered print-at-home PDF
•  A0 layered copy-shop PDF
•  Projector file
•  Layered PDF print-at-home guide to help you only print the pages you need
•  Getting started guide

By purchasing this pattern you agree to the terms and conditions. This pattern is available for personal use only. You may not copy, sell, or distribute the pattern or any of the pieces, or sell the finished garment. You may also not use any of the pattern pieces as base for drafting your own pattern, unless it's strictly personal.

Please note that the PDF files are read-only. If you need to do alterations to the PDF files, reach out to us.

Browse the pattern testing gallery:
Ella Dress gallery

Ella sewing tutorial:
https://www.youtube.com/watch?v=4G8N1gcx_lU

Find more inspiration on Instagram:
@silversagapatterns

Hashtags for the Ella Dress:
#SilversagaPatterns #EllaDressPattern

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 42401466539

Discover Niche Categories That Outsell dress a line pattern

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 20 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
stookie778
Omaha, US
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound. By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up. You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil). I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like. So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too. If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before. I originally did all the above myself, so that's my experience and so your mileage may vary. I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes. I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat. WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot. Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
L
Verified Purchase
Ligia
Pawtucket, US
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
J
Verified Purchase
J M.
Phoenix, US
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
N
Verified Purchase
Nadezhda Gavrish
Boise, US
★★★★★ 5
Essential Tool for Effective Sound Deadening Installation
The Car Sound Deadening Roller Metal Installation Tool is a must-have for anyone looking to enhance their vehicle's acoustics. Designed to aid in the application of soundproofing materials, this roller ensures a smooth and efficient installation process. Key Features: Ergonomic Design: The tool features a comfortable handle that allows for extended use without causing hand fatigue. Durable Construction: Made with high-quality materials, it withstands the pressures of installation, ensuring longevity. Efficient Application: The roller helps in evenly pressing sound deadening materials onto surfaces, reducing air bubbles and ensuring a tight bond. Whether you're a DIY enthusiast or a professional, this tool simplifies the soundproofing process, leading to a quieter and more comfortable ride.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2025
I
Verified Purchase
igomesf
Birmingham, US
★★★★★ 5
Great Quality and Easy to Use
This sound deadening roller set is a must-have for installing car insulation materials The metal wheels are durable and roll smoothly making it easy to apply pressure for a strong bond The different sizes are perfect for working in tight spaces and larger areas ensuring a professional finish The ergonomic handles provide a comfortable grip and allow better control during installation The rollers apply even pressure without damaging the material making the process much faster and more efficient This product offers great value for money excellent functionality and is easy to use If you are installing sound deadening material in your car this set is a great choice Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2025

recommand products

MACloth Straps A Line Satin Long Prom Dress Eggplant Formal Evening Gown with Open Back Eggplant / Above Knee / US10
22.17
Long Formal Dress cd0192 by Ladivine Champagne / 3XLarge
23.31
Adora Design 3147 Pleated Satin A-Line Long Formal Prom Gown
25.47
Prom Long Formal Chiffon Evening Dress
25.18
Formal A-Line Prom Long Dress by LaDivine CD337
21.39