SKU: 45407337471
1980s cocktail dress

1980s cocktail dress vintage 80s little Black dress

Sale price$22.91 Regular price$25.46
Save 10%

Pay in installments of $6.37 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 11 - Sep 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

1980s cocktail dress vintage 80s little Black dressA 1980s black lace cocktail dress. Can be worn strapless or with lacy straps. The little black dress features a fitted bodice and full skirt. The bust is detailed with a fold over lapel trim. The back of the bodice is ruched with elastic. There are belt loops on the sides of the waist. The dress closes on the side with a zipper. CONDITION In good condition. There is no belt. SIZE & MEASUREMENTS 87. 6 cm Tag Size GB 12 F 40 D 38 NL 38 Fits Like Small

A 1980s black lace cocktail dress. Can be worn strapless or with lacy straps. The little black dress features a fitted bodice and full skirt. The bust is detailed with a fold over lapel trim. The back of the bodice is ruched with elastic. There are belt loops on the sides of the waist. The dress closes on the side with a zipper.

CONDITION

In good condition. There is no belt.

    SIZE & MEASUREMENTS

    87.6 cm
    Tag Size GB 12 / F 40 / D 38 / NL 38
    Fits Like Small 
    Bust 31 inch 78.7 cm
    Waist 27 inch 68.6 cm
    Length 25.25 inch 64.1 cm
    Length with straps 34.5 inch 87.6 cm
    Skirt Length 18 inch 45.7 cm
    Hips 45 inch 114.3 cm

    Dresses

    • Bust measured across the front from armpit to armpit. Double the measurement for size. 
    • Length measured down the center of the back from the top neck seam to the bottom of the garment. 
    • Waist measured across the dress on the waist seam, or wear the waist would naturally lie. Double for size. 
    • Hips measured across the dress at the fullest part of the hips (approximately 7-9 inches below the waist).  Double for size. 
    • Sleeves measured down the underarm from the armpit to the end of sleeve.
    • Outer sleeve measured from the shoulder seam to the end of sleeve down the outside of the arm. 
    • Shoulders measured between shoulder seams on the backside. 
    • Center of Neck to Cuff measured from the back center of the neck down the outside of the arm to the end of the sleeve. 
    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 45407337471

    Discover Niche Categories That Outsell 1980s cocktail dress

    Top-Converting Item to Boost Your Average Order

    4.9 ★★★★★
    Based on 29 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    T
    Verified Purchase
    Tony Nowikowski
    Boise, US
    ★★★★★ 1
    TPMS Compatability is a LIE
    Size: Sedan, Crossover, Small Truck
    2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on November 26, 2024
    R
    Verified Purchase
    raspree56
    Draper, US
    ★★★★★ 5
    Forget the gooey stuff, this product WORKS! See UPDATES 1 and 2
    Size: Compact Car, Mid-size Sedan
    I've had a slow leak in one of my tires for some time. It's a common thing with chrome plated alloy wheels, they get corrosion on the bead area where the tire seals and then you get a slow leak. This was the only product which is water soluble so it's not going to make a permanent mess inside the tire; additionally, it contains tiny bits of Tufsyn which is the material some tires are made from. So it's not just a liquid that is sealing the leak, it's tiny bits of rubber. I was putting 5 or 6 lbs of air in my tire every few days, and I could see that the tire was getting low. I installed this TireJect per the instructions a week ago and the tire appears to be doing great, despite the fact that we've had some very cold weather. (I didn't want to check it with a gauge while it was this cold out because just in case the tire's valve didn't seal all the way; I'll check with a gauge when this cold snap is past.) While I can't say for 100% sure that there is no more leak, I suspect that the leak has been sealed up completely. This is a product unlike the others and I think it's worth the price. FIRST UPDATE: It has been two months and I haven't had to add any air at all to the tire where I used this product. There was a slow rim leak which was losing about a pound or so per day and it has been totally fixed. The car has sat for several days a few times, including in single digit cold weather, as well as driven regularly otherwise, and the tire hasn't lost any air. I think it's the micro Tufsyn fibers in this product which seal leaks better than some goopy glue stuff other brands are made of. I totally recommend this product! SECOND UPDATE - it's been eleven months since I added this to my tire with the slow rim leak and I have not had to add air a single time. Not once. THIS STUFF WORKS. Forget the slime and foam and get this.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on December 5, 2024
    J
    Verified Purchase
    Jack
    Fort Morgan, US
    ★★★★★ 5
    Good
    Prefect. It’s exactly what my lawnmower needed.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 2, 2026
    G
    Verified Purchase
    George Gagnon
    Pawtucket, US
    ★★★★★ 5
    Snowblower repair.
    Snowblower spark plugs that work for me.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 28, 2026
    A
    Verified Purchase
    Amazon Customer
    Omaha, US
    ★★★★★ 5
    Fast delivery and good price
    Good price and name brand
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 26, 2026

    recommand products