SKU: 4590162195
sylke dressing

sylke dressing SYLKE® Adhesive Wound Closure

Sale price$22.29 Regular price$24.77
Save 10%
Size: 4

Pay in installments of $6.19 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 29 - Aug 3

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

sylke dressing SYLKE® Adhesive Wound ClosureDEVICE DESCRIPTION: SYLKE Skin Closure is a single use, sterile, woven silk fibroin mesh strip coated on one side with a pressure sensitive adhesive. The adhesive surface is covered by a removable release liner with a pre slit tab. HOW SUPPLIED: Each SYLKE Skin Closure strip is provided sterile in an individually sealed pouch. The device is available in multiple lengths and widths. Refer to product label and regional catalog for specific dimensions

DEVICE DESCRIPTION: 

SYLKE® Skin Closure is a single-use, sterile, woven silk fibroin mesh strip coated on one side with a pressure-sensitive adhesive. The adhesive surface is covered by a removable release liner with a pre-slit tab. 

HOW SUPPLIED: 

Each SYLKE® Skin Closure strip is provided sterile in an individually sealed pouch. The device is available in multiple lengths and widths. Refer to product label and regional catalog for specific dimensions and available packaging configurations.

INTENDED USE:  

SYLKE® Skin Closure is a sterile, single-use, silk fibroin mesh strip with a pressure-sensitive adhesive intended for topical skin closure and wound support. The device is used to hold together well-approximated skin edges of a wound, and to cover and protect the wound. The device is designed for wear of up to 14 days. SYLKE® Skin Closure may be applied by healthcare professionals or, where permitted by applicable laws and regulations, by lay users following the included instructions.  

INDICATIONS:  

SYLKE® Skin Closure is indicated for topical closure and coverage of thoroughly cleansed simple lacerations and minor cuts, where it may be used as the primary skin closure. SYLKE® Skin Closure is also indicated for topical closure and coverage of post-surgical skin incisions in which deeper layers have been closed, where it is used as an adjunct to sutures or staples. Wound edges must be easily approximated without tension. 

CONTRAINDICATIONS: 

  • SYLKE® Skin Closure is contraindicated for use on infected or contaminated wounds. Signs of infection may include: pus, pain, warmth, redness, swelling, and/or fever. If any signs of infection are present, seek medical attention. 

  • SYLKE® Skin Closure is contraindicated for use on wounds containing dirt, debris, or other contaminants. Wounds must be thoroughly cleansed prior to application. Trapping contaminants beneath the device may lead to infection. 

  • SYLKE® Skin Closure is contraindicated for use in high-tension wounds without the support of additional skin closure devices e.g., sutures. 

  • SYLKE® Skin Closure is contraindicated for use on wounds that are actively bleeding. 

  • SYLKE® Skin Closure is contraindicated for use below the skin surface. 

  • SYLKE® Skin Closure is contraindicated for use on mucosal surfaces or surrounding areas including lips, inside the mouth, eyes, eyelids, or the genital and perianal region. 

WARNINGS: 

  • SYLKE® Skin Closure is intended to be worn for up to 14 days. Early removal of SYLKE® Skin Closure may result in skin stripping, pain, and/or redness. To aid in early removal, SYLKE® Skin Closure may be soaked in warm water to soften the adhesive. 

  • If signs of infection are present around the wound covered by SYLKE® Skin Closure, contact a medical professional. 

  • Do not use SYLKE® Skin Closure if the sterile package is damaged or compromised. 

  • Individuals with a history of sensitivity to silk or adhesive materials may be at increased risk for skin irritation or allergic reaction. Monitor for signs of hypersensitivity, including redness, swelling, or rash at the application site. If any of these develop, remove the deviceand contact a healthcare provider. 

 PRECAUTIONS: 

  • Apply SYLKE® Skin Closure only to areas where adhesion can be obtained. Causes of inadequate adhesion include exudate, skin oils, moisture, or areas containing dense hair such as the scalp. 

  • Performance of SYLKE® Skin Closure under a secondary dressing has not been evaluated. Healthcare providers should use clinical judgment when considering the use of a secondary dressing over SYLKE® Skin Closure. Lay users should not apply a secondary dressing over SYLKE® Skin Closure without first consulting a healthcare provider. 

  • Submersion in water may impact the device's performance and duration of use.

ADDITIONAL INFORMATION: 

SYLKE® Skin Closure is not made with natural rubber latex. 

SYLKE® Skin Closure has not been evaluated for use in hyperbaric oxygen therapy (HBOT) environments. Safety and performance under hyperbaric conditions have not been established. Healthcare providers should use clinical judgment when considering the use of SYLKE® Skin Closure on patients undergoing HBOT.  

STORAGE: 

For best results, store in a cool, dry place away from direct sunlight. Do not use after the expiration date printed on the label. 

STERILITY: 

SYLKE® Skin Closure is sterilized by ethylene oxide gas. Do not re-sterilize. Do not use if package is opened or damaged. Do not use SYLKE® Skin Closure if strip is damaged or discolored. Discard any unused material. 

APPLICATION: 

SYLKE® Skin Closure should only be used on clean, dry wounds when the skin edges of the wound are easily approximated without tension. Examine environment where SYLKE® Skin Closure will be handled and applied and ensure the absence of visible dirt or contaminants. 

  1. Thoroughly cleanse and dry wound to prepare skin for proper adhesion of SYLKE® Skin Closure to the wound edges. (FIGURE A)
  2. Open sterile pouch. Remove SYLKE® Skin Closure strip from pouch. (FIGURE B)
  3. With the release liner still in place, hold the strip alongside the wound to measure the required length. The strip should extend at least 1 cm beyond each end of the wound. (FIGURE C)
  4. Using clean scissors, trim the strip to the appropriate length. (FIGURE D)
  5. Hold the strip and peel back the pre-slit tab to expose the adhesive. (FIGURE E)
  6. Place the exposed adhesive section on the skin at least 1 cm beyond one end of the wound. Press firmly to anchor the strip to the skin. (FIGURE F)
  7. While holding the anchored end in place, slowly peel away the release liner and press the adhesive strip along the length of the wound. The strip should extend at least 1 cm beyond the opposite end of the wound. If the wound length exceeds the length of a single strip, repeat previous steps with additional devices. (FIGURE G)
  8. Press firmly along the entire length of the strip to secure. Check that all edges are flat against the skin and no sections are lifted. Proper adhesion is achieved by applying pressure evenly across the strip. (FIGURE H)

INSTRUCTIONS FOR WEAR: 

  • When showering, do not scrub the device with a loofah, exfoliant, or other abrasive. Gently pat dry. 

  • Do not swim or fully submerge the wound while wearing SYLKE® Skin Closure. 

  • Keep wound clean and free of dirt and debris. Dirt trapped in the SYLKE® Skin Closure may cause irritation or infection. 

  • Contact a healthcare provider if the device detaches partially or completely before 14 days or if signs of infection or irritation are present. 

  • Remove SYLKE® Skin Closure after 14 days. 

  • SYLKE® Skin Closure is a single-use device and must not be reapplied after removal 

REMOVAL INSTRUCTIONS: 

  1. Gently lift the edge of SYLKE® Skin Closure at one end of the wound.
  2. Slowly peel SYLKE® Skin Closure away from the skin along the line of the wound. Use other hand to stabilize the surrounding skin to decrease tension as the SYLKE® Skin Closure strip is peeled off.
  3. If SYLKE® Skin Closure does not easily remove from skin, soak strip in warm water to soften adhesive.
  4. Once fully removed, discard the skin closure strip in a standard disposal bin. Do not re-use or re-sterilize the device.
  5. Any residual adhesive and/or dried wound exudate can be gently cleaned from the skin with warm soapy water. If residue remains, a medical adhesive remover may be used to loosen adhesive remnants. 

INFORM THE MANUFACTURER: 

If you have any questions or comments, please contact SYLKE®, Inc. at [email protected]. 

Please report a serious incident occurring in relation to the device to SYLKE®, Inc. at quality@sylke.com and the local regulatory authority.  

The Instructions for Use are provided in electronic format. If a paper copy is required, it can be requested free of charge, including shipping, via [email protected] 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 4590162195

Discover Niche Categories That Outsell sylke dressing

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kristina
Louisville, US
★★★★★ 4
Great value
Size: 18-26 Expedition, 15-26 F-150, 18-26 Navigator
The engine air filter fit perfect. The cabin air filter was a bit of a challenge fitting. seemed to be a bit larger but it went in and got the cap back on the box. For the price you cant beat it. Would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
S
Verified Purchase
Storyteller
Phoenix, US
★★★★★ 5
Great Filter Set for Allergy‑Sensitive Families and MPG‑Minded Drivers
Size: 21-25 TLX, 18-25 Odyssey
I bought this set because I prefer handling routine maintenance myself, especially cabin and engine air filters, rather than paying dealership prices for simple jobs. The package included one cabin air filter and one engine air filter, plus a full backup set for the next service interval. Both filters installed easily and fit the 2018 Honda Odyssey exactly as expected. No trimming, no forcing, and no alignment issues. The cabin filter seated cleanly in the glove‑box housing, and the engine filter dropped into the airbox without any airflow restriction or sealing gaps. This setup is ideal for Odyssey owners who want to maintain optimal cabin air quality—especially helpful for families with allergies—and for drivers looking to keep engine airflow unrestricted for the best possible MPG and throttle response. It may not be necessary for anyone who relies exclusively on dealership service or doesn’t perform their own maintenance. Overall, this is a straightforward, high‑value filter set that installs cleanly and supports both air quality and engine efficiency for DIY‑minded Odyssey owners.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
T
Verified Purchase
Tom Crum
Lake Worth, US
★★★★★ 5
Auto air filters
Size: 16-22 Pilot, 14-16 MDX
Perfect - product great - installation easy and much cheaper than having dealer or auto shop do it ——
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
R
Verified Purchase
Ramr Imari
West Palm Beach, US
★★★★★ 5
Excellent Air filter - Easy installation.
Style: BE-743 1-Pack
Excellent AC and Heater Cabinet odor defense air filter. I noticed immediately the smell coming out of the vents was fresher and the musty smell that was coming from the vents was crisper and cleaner. Very easy installation that you can do yourself and don’t need to pay a shop to do. The price is one of the best online and coms in quickly. It’s very sturdy, filter quality is excellent and it definitely improves the air quality and flow in your car. Fits perfectly like any OEM filter, this is a great buy for the price of an installation that will take you Les then 10 minutes to do yourself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
K
Verified Purchase
Khaleesi
Phoenix, US
★★★★★ 5
Great filter and easy installation
Style: BE-159 1-Pack, Style: BE-159 1-Pack
For my 2016 Hyundai Sonata Hybrid Limited. I cannot believe I paid so much more for a brand-name filter that does the same thing as this one. It is made of the same material as the dealer one I took out. Very easy to install, cant believe I paid for this to be done in the past with oil changes. Requires no tools and did not get dirty at all. No mechanical skills needed, especially if you run into trouble and can use YouTube. PROS - great quality, cannot tell that it is after-market - very professionally made, not irregularities seen - excellent fit in position, no adjustment needed - very easy to install, cannot believe I paid to have this done in the past - no mechanical skills needed to install - great price compared to what big name productions want for the same thing - cannot tell the difference in air quality between this and the dealer filter I took out - removes outside odor completely - did not require tools are getting dirty CONS - None
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026

recommand products