Pay in installments of $5.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 22 - Sep 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
woom bike mountainbike Woom Original 4 microSHIFT 20" Bike — PlaytriThe woom 4 introduces children aged six years to the world of gear shifting. The bike's seven speeds in combination with the easy to operate twist shifter expand the bike's range of use and increase the child's mobility. Whether they want to ride their bikes into the woods or up hills the new found freedom of gears makes longer adventures on two wheels child's play. An innovative and ultralight 20" children's bike with 7 gears designed for all round
The woom 4 introduces children aged six years to the world of gear-shifting. The bike's seven speeds in combination with the easy-to-operate twist shifter expand the bike's range of use and increase the child's mobility. Whether they want to ride their bikes into the woods or up hills – the new-found freedom of gears makes longer adventures on two wheels child's play.
An innovative and ultralight 20" children's bike with 7 gears designed for all-round use by children aged 6 years and over.
Age: 6 - 8 years
Height: 45 - 50″
Frame
- Made from light, high-quality AA 6061 aluminum material
- Geometrically designed with 20” wheels with agile and easy handling in mind
- Low entry, lower sitting position, and forgiving steering geometry provide control and comfort
- LEGGIE Kickstand pre-installed
Wheels
- Ultralight SOOPA DOOPA HOOPS aluminum rims
- Aluminum hubs with sealed bearings and mounts for woom click-on fenders
- Quick-release skewers for easy installation and removal
- 20 lightweight, stainless-steel spokes, double-crossed spoking
Tires
- 20 x 1.4″ Schwalbe Little Joe folding tires – woom edition
- High-quality, light tires for low rolling resistance and maximum grip
- Schrader (car-type) valves
- Reflective striping on tire sidewall for optimal visibility even in low-light conditions
Stem
- Lightweight stem made out of forged aluminum
- Adjustable height and reach mean the stem can be adjusted for optimal riding position as the child grows.
- Handlebars attached via two clamps and fixed with two 5 mm hex bolts
- Integrated headset bolt allows for easy compression adjustment
Handlebars
- Wide, ergonomically adapted, light aluminum bars offer more control
- Sandblasted and black anodized
- Width: 54 cm
Grips
- woom Ergogrip – designed specifically for kid’s hands
- Ergonomically formed gripping surface, non-toxic
- Handlebar ends with extra-large diameter for greater protection
- Screw-in grips ensure secure attachment to handlebars
Drive
- Lightweight, forged 4.3" (110 mm) aluminum cranks with narrow tread (Q-factor)
- Narrow-wide chainring with 28 teeth
- Cassette with 11-28 teeth
- Narrow, flat platform plastic pedals
- Sealed cartridge
Gears
- 7 speeds
- microSHIFT MS29 twist shifter
- microSHIFT M21SS rear derailleur
Fork
- Light unicrown fork made out of aluminum
- 1″ shaft
- Generous trail angle for easy handling
Headset
- Fully integrated 1″ headset
- Sealed industrial bearings
- Integrated ahead clamp
Seat
- Ergonomically designed to fit children's pelvis
- Non-toxic
- Side protection to lean against walls
Seatpost
- Anodized aluminum seatpost
- Minimum insertion point marked, plus integrated guide in seat tube
Seatpost clamp
- Secure aluminum seatpost clamp eliminates risk of turning/twisting
- Extra-long quick-release skewer makes it easier for kids to release and close
Brakes
- Two independently operated V-brakes with braking power adapted for children
- Brake levers are ergonomically adapted, reach-adjustable, and suitable for kid’s hands
- High-quality Jagwire cables provide reduced friction and smooth performance
Enclosed tools
- 15 mm spanner for pedals
- 5 mm hex key for stem
Weight
- 7.7 kg / 16.9 lbs (without pedals)
Weight limit
- 155 lbs (70 kg)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial.
These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings.
The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure.
In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily.
The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads.
The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top.
Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid.
The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece.
Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top.
The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.)
If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
recommand products
Fiamma Markisen-Adapter für F45 S / F45 L / Zip an VW Volkswagen T4 Ar – Camper-Forum-Münsterland
21.38
Thule Adapter für Eriba Touring – Markisenbefestigung an der Regenrinne
25.03
Verbesserter Wasserablauf für die Thule Omnistor Markise
27.96
Vickywood Markisen-Einzelwand – Flexibler Schutz für Sonne und Wind – Horonto: Dachzelte Emsland & Grafschaft Bentheim
27.02
SkyMotion LED Pergola 3x3: Luxus für Ihren Garten – Sky P
24.27