Pay in installments of $7.04 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 11 - Oct 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
graded card 50 Graded PSAProudly Made in USA, Premium Card Display Case Our sports card display case is handcrafted from solid hardwood w a glossy black, cherry, walnut and golden oak finish. It can hold up to 50 PSA graded sports cards. It has outside dimensions of 38"w x 34. 5"h x 2" deep, while the inside dimensions measure 36. 5" x 33" x 1. 5" deep. The ideal card height is 6". Our graded card display case wall mount is deep enough to keep your sports & playing cards
- 【Proudly Made in USA, Premium Card Display Case】- Our sports card display case is handcrafted from solid hardwood w/ a glossy black, cherry, walnut and golden oak finish. It can hold up to 50 PSA-graded sports cards. It has outside dimensions of 38"w x 34.5"h x 2" deep, while the inside dimensions measure 36.5" x 33" x 1.5" deep. The ideal card height is 6". Our graded card display case wall mount is deep enough to keep your sports & playing cards safe. It comes w/ 2 brass locks for added security.
- 【Display & Protect Your Graded Sports Cards】-Pennzoni display case arrives fully assembled, framed with a hardwood structure and safeguarded by crystal clear acrylic door. Offering ultra-clear viewing and 100% UV protection, it prevents sun damage, fading, and dust accumulation. Equipped with brass hinges and ready-to-hang hooks, this case highlights your collectibles in unparalleled clarity and security
- 【Highlight Your Sports Cards Like No Other】- Display & show off your best PSA graded Pokémon cards, trading cards, hockey cards, baseball cards, basketball cards, & other sports cards with our premium quality sports card waterproof case. This is a perfect wall-hanging display card box for all graded cards. It is meticulously polished to achieve unmatched smoothness and elegance, turning your display more attractive than ever!
- 【Built to Last to Keep Your Collections Safe】- Our PSA-graded card display case has a shelf slot to properly hold your cards on the shelf. For the best viewing of your hockey cards, baseball cards, football cards, or Pokémon cards, our case is built with a crystal clear acrylic framed door. It is made of solid hardwood & thick, sturdy, crystal-clear acrylic framed door to make sure that your collectibles are safe and can withstand deterioration.
-
【Delivered to Your Doorstep Safe & Intact】 - At Pennzoni, we always consider the fragility of our products. We provide safe packaging by placing our product in multiple boxes to relieve shock and pressure during transportation. Your satisfaction is our top priority! For concerns & queries, contact us. Our team will be happy to help and ensure you are 100% satisfied.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 26 reviews
Sort
Product Reviews
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
This will work but prep is key!
I have an older RV that the gelcoat has dulled and is oxidized, but otherwise in good shape. I have buffed and polished in the past only for it to last a short time. I was looking up different products to try and this one has such good reviews, I thought I would give it a try. I bought the kit with the Poliglow and the Poliprep, with the scrubber and the microfiber glove. I started with the poliprep and it did a great job of gettting the streaks and black marks off. You spend a lot of time scrubbing to your likeness because anything that is still on the gelcoat when you apply the poliglow, it will be locked in there. The Poliglow is like a clearcoat that goes over the gelcoat. You have to build up layers and here are some of the tips and tricks I figured out that really helped my finished RV look great. First, make sure the applicator stays damp, this keeps the poliglow more uniform across the glove. Also, stick it in a zip lock bag when not using, you do not want it to dry out while you are using it. I found out that applying this in direct sunlight in warm temps, is the best method. This allows the poliglow to dry really fast. The first 3 or 4 layers will look streaky and dull but this is ok and as you build up the layers, the shine will come back. I found if you do this when its cooler, the layers do not dry as quick and you will get some permanent streaking or running. I had to remove a section I did in the evening because I noticed this. When in direct sunlight, this gave me the best results with no streaking or running. It dries fast and you can keep working. Like it says, do not do big sections at a time, keep it to small what you can reach sections and build those up and move on. As far as how much to buy? I have a 40 ft toy hauler and I got to kits and I had just enough to finish the whole thing minus the nose cap. I have Durabak on the nose cap, so I dont need to worry about that. I ended up buying one more bottle of the poliglow to have for my maintenance coats. Overall, I am pleased with how my 10 year old RV looks and other than some of the decals show age, it looks new again. If I were to buy a new RV, I would put this on right away and preserve the whole RV including the decals. Its not too expensive and its a lot of work, especially the prep, but it does end up with great results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 21, 2023
★★★★★ 5
Excellent shine
Excellent line of products. Looking at the picture, you can see what the camper looked like before the Poli Glow. To the left of the window is the after Poli Glow.
It takes some elbow grease (follow instructions well) but well worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Camping enthusiast approved
One bottle covered my 20ft camping trailer 4 coats and with a little remaining for future touch ups. It definitely increases the gloss. I'm glad I didn't waste my time with wax. This is like an easy wipe on clear coat. I will report back in the future for longevity.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026