tarp carside Curbside Tarp Joint (Set of 2) – ZEN Camps

tarp carside Curbside Tarp Joint (Set of 2) – ZEN CampsFeature introduction Introduced with practical examples ZEN Camps car side tarp joint is a hook equipped bracket for connecting tarps to vehicles, designed exclusively for vehicles with rain molds. Compatible with light vans, one box vehicles, and SUVs with rain molds such as Hiace, Jimny, Every, NBOX, Atrai, Town Ace, Hijet, Jeep, etc.; safely connects vehicle and tarp for auto camping, car camping, van life, and day camping. The main feature is a

Feature introduction

Introduced with practical examples

ZEN Camps’ car-side tarp joint is a hook-equipped bracket for connecting tarps to vehicles, designed exclusively for vehicles with rain molds.

Compatible with light vans, one-box vehicles, and SUVs with rain molds such as Hiace, Jimny, Every, NBOX, Atrai, Town Ace, Hijet, Jeep, etc.; safely connects vehicle and tarp for auto camping, car camping, van life, and day camping.

The main feature is a three-point hook structure with two points on the sides and one in the center, allowing the tarp to be fixed at two points; this provides greater stability compared to typical single-point car-side tarp brackets or vehicle hooks, preventing issues like loosening, detachment, or bending from wind.

The central hook can hold LED lanterns or camping lanterns and can be attached to tarp poles or sub-poles up to about 1.6cm in diameter, allowing use as a lantern hook or lantern hanger.

No tools required for installation; simple structure with one screw makes setup easy even for beginners; spring washer design prevents screws from loosening due to vibration or strong winds while driving.

Designed to avoid interference with sliding or hinged doors, reducing stress when opening and closing doors; thick rubber coating on attachment points prevents scratches, rubbing, and bolt contact with the vehicle body.

Made of durable, rust-resistant stainless steel with a rugged, minimal outdoor design.

Compatible with rain molds 10mm or wider and 18mm or less in height; body size approximately 5cm × 6cm; weight approximately 97g.

This car-side tarp joint is ideal for those looking for car-side tarp fixing brackets, vehicle tarp joints, vehicle lantern hooks, or car-side tarp accessories, and campers who want to simplify setup.

【Compatibility Conditions】
Compatible installation size: Can be attached to vehicles with rain mold width of 10mm or more and height of 18mm or less.
(※ Please check the installation width shown in the image)

【Body Size】5cm × 6cm
【Weight】97g
【Material】Stainless steel / Rubber

【Special Notes】
• Check in advance whether the rain mold on the vehicle to be installed is compatible and strong enough.
• Depending on the shape of the rain mold, it may not be possible to install even if it is the specified size.
• Make sure the metal parts do not touch the vehicle’s painted surface before attaching.
• Try to avoid using in strong winds.
• Stretch tarp ropes at right angles to the vehicle.
• Avoid driving with the tarp hanger attached.

Various content is being delivered on the official YouTube "ZEN Channel"!

Visit the channel here

We also share usage tips, ways to make the most of it, and other great deals on each SNS!