SKU: 81156432797
jhs boost pedal

jhs boost pedal JHS Morning Glory Clean Overdrive Pedal – Chicago Music Exchange

Sale price$26.41 Regular price$29.34
Save 10%

Pay in installments of $7.33 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 30 - Aug 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

jhs boost pedal JHS Morning Glory Clean Overdrive Pedal – Chicago Music ExchangeWe took our most legendary overdrive to a new level and redefined what it means to be transparent. Clearer pick attack, improved low end, and more versatile gain stacking. This is the ultimate first stage overdrive pedal. It started at soundcheck. I watched Julian Lage dial in his tone at a soundcheck in Chicago. Vintage Fender amp. Collings semi hollow guitar. He adjusted pickup heights, moved positions on stage, chasing the perfect balance. It was

We took our most legendary overdrive to a new level and redefined what it means to be transparent. Clearer pick attack, improved low end, and more versatile gain stacking.

This is the ultimate first-stage overdrive pedal. It start­ed at sound­check.

I watched Ju­lian Lage dial in his tone at a sound­check in Chica­go. Vin­ta­ge Fen­der amp. Collings semi-hol­low gui­tar. He ad­just­ed pickup heights, moved po­si­tions on stage, chas­ing the per­fect bal­ance. It was cap­ti­vat­ing.

Ju­lian has used a Morn­ing Glo­ry for years — he's a big rea­son it end­ed up on jazz ped­al­boards world­wide. Af­ter the sound­check, we dis­cussed what he looked for in an over­drive. One thing led to an­oth­er. My brain start­ed wan­der­ing off into dif­fer­ent ideas. Could we make the Morning Glory even better?

The prob­lem with trans­par­ent.
When you add over­drive — any type of clip­ping — you lose nu­ance. Pick at­tack gets com­pressed. Dy­na­mics nar­row. All overdrives shape frequency response, even the most transparent.

So we tried some­thing no one's done: we took our Morn­ing Glo­ry (a Blues­breaker-style topol­o­gy) and com­plete­ly re­built it around a stu­dio-grade par­al­lel clean blend. Not just a mod­i­fi­ca­tion, a re­design from the ground up.

On pa­per, it seemed point­less — why blend a clean sig­nal into some­thing al­ready trans­par­ent?

Here's why. The Morn­ing Glo­ry's magic happens when you turn up the Drive, the circuit boosts higher harmonics and adds soft com­pres­sion. Jan­g­ly. Per­fect in a mix. The par­al­lel clean cir­cuit lets you keep all that while di­al­ing the nat­ur­al low end back in — all the tone, all the char­ac­ter. Noth­ing com­pro­mised.


This isn't a clean knob slapped on a Morn­ing Glo­ry.
For those won­der­ing — let's talk about what's ac­tu­al­ly hap­pen­ing in­side. The Clean con­trol uses a dual-gang po­ten­tiome­ter. As you turn it, clean gain scales pro­por­tion­al­ly with the drive sig­nal — it’s per­fect­ly en­gi­neered from the ground up. Most clean blends are an af­terthought — a sim­ple mix knob tacked onto an ex­isting cir­cuit. This one was de­signed so the two sig­nals track to­geth­er across all gain settings. No vol­ume jumps. No weird phase is­sues. Just seam­less blend­ing from Morn­ing Glo­ry to pure sig­nal and every­thing in-be­tween.

The pow­er sec­tion runs on a ±9V dual sup­ply — the same topol­o­gy as our V4 — which gives you high­er head­room than the orig­i­nal V1 cir­cuit and any oth­er Bluesbreak­er-style ped­al out there. This is where most clones get it wrong. Think of it as the orig­i­nal Ver­sion 1 Morn­ing Glo­ry voic­ing with the V4 en­gi­neer­ing en­hance­ments.

The Tone con­trol af­fects only the over­drive path. Your clean sig­nal stays par­al­lel and un­touched. For the peo­ple who care about this stuff: this is the most thought-out and so­phis­ticat­ed Morn­ing Glo­ry we've ever built.

End­less head­room. Any vol­ume.
End­less head­room. Those mas­sive clean gui­tar sounds that you love on record­ings — most were made at vol­umes that would get you evict­ed. The Morn­ing Glo­ry Clean gives you the stiff­ness and au­thor­i­ty of a high-wattage amp at the edge of breakup — with­out the earplugs.

Think of the Clean con­trol as adding back in wattage, clar­i­ty, and punch.

It goes on every­thing.
Stack a dis­tor­tion in front and the sus­tain opens up in­stead of clos­ing off. Run it af­ter de­lay for new territories of series/parallel textures. First-stage over­drive? This is the best we've ever built. Pe­riod.

It breathes in front of amp mod­el­ers too. The over­drive and pres­ence of the classic Morn­ing Glo­ry, with your at­tack and low-end con­tent di­aled back in — magic in front of a Kem­per, Quad Cor­tex, UAD, or He­lix.

Bass play­ers: the orig­i­nal Morn­ing Glo­ry rolls off low end just like a fi­nal mix. That's why you love it — that's why it's be­come a stan­dard on so many pro bassists' boards. The clean blend di­als that low end back on com­mand for your dif­fer­ent bass and ampli­fi­er needs. This might be the best bass over­drive we've ever made.

Who this isn't for.
This ped­al isn't for every­one and we're con­fi­dent in say­ing that. If you want the dopamine hit of a wild new sound, look else­where. If you want tons of con­trols, tweaka­bil­i­ty, bells and whis­tles — this is not that. This ped­al does less while giv­ing you more. No bad sounds. Im­me­dia­te gra­ti­fi­ca­tion. Leave it on and for­get it's there.

CON­TROLS

  • Vol­ume — Adjusts the overall volume in conjunction with the drive and clean.  
  • Clean — Full left: orig­i­nal Morn­ing Glo­ry. Full right: pure clean sig­nal. Start with Clean and Drive maxed, dial Clean back (counter clockwise) un­til you find your perfect bal­ance.
  • Drive — Sat­u­ra­tion. Crank it and use the Clean con­trol as your bal­ance. This ped­al is de­signed to be used this way.
  • Tone — Clas­sic Morn­ing Glo­ry tone stack. Af­fects only the drive path. Back for warmth, for­ward for clar­i­ty.
  • Clean Boost Pro Tip Morning Glory Clean can be used as a stand-alone clean boost.  Set the Clean to 100% (fully clockwise) and  increase the Drive.  In this configuration, the Drive will not produce any overdrive clipping - only clean volume boosting.

SPEC­I­FI­CA­TIONS

  • ±9V Dual Sup­ply (mas­sive head­room) 
  • Top-mount­ed jacks 
  • 9V DC Cen­ter Neg­a­tive
  • Silent Buffered Bypass Switching
  • THIS PEDAL MEASURES 2.6” X 4.8” X 1.6” AND CONSUMES 60mA. DO NOT USE MORE THAN 9VDC. DAMAGE MAY OCCUR AND YOUR WARRANTY WILL BE VOIDED.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81156432797

Discover Niche Categories That Outsell jhs boost pedal

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
M. Gondek
Carnegie, US
★★★★★ 5
A really great portable charger
Color: Golden
Works great with my Samsung Galaxy S25 in a magnetic case. I love the small form factor, which means I can keep it on my phone to charge while I'm using the phone when I need to. It also means it's incredibly easy to take any time I leave the house, not just when I travel. It does get pretty warm, but I find that keeping the phone face down helps that a lot. And of course using the phone while it's charging makes it hotter. One note if You're like me and you've never used one of these: there's a small button on the side that activates or deactivates the magnet. I thought the magnet had died because it was no longer attaching to my phone. Then I randomly held the button down and it snapped right back on. It's a useful feature now that I know that it's there, so I don't leave the magnet on when it might be near swipeable cards in my bag. Funny they don't mention anything about that in all the product images, but now I know.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
Z
Verified Purchase
Zach B.
Fort Morgan, US
★★★★★ 5
Heat and Charging Complaints Are Unjustified
Color: White
Good product overall. I was going to give it 4 stars because it hangs slightly off the bottom of my iPhone 15 Pro but I realized it says 16/17. Those models might have the MagSafe ring slightly higher on the phone in which case it would fit cleaner. I was worried about Heat after reading the reviews. All inductive charging systems generate waste heat and all charging generates waste heat. It’s nothing extreme here. If it’s in your pocket without air flow around it, it gets quite warm on the phone for sure. In my hand, using the phone for a while plane flight, there’s enough flow that it’s just a bit warm. Battery life is as advertised. It’s somewhere around a charge or so, I didn’t check this scientifically. Plenty to keep you topped up through a cross country air trip. It’s very small and much nicer to have on the phone than some other models I’ve borrowed. Reviews have some complaints that it “doesn’t charge the phone”. That’s a goofy complaint. If the phone is dormant it will add charge percentage. If you’re streaming and emailing, on Bluetooth, and WiFi all at once you’re going to use power about as fast as it can supply without it spiking temperature. I was very happy to just sit at 75% my whole flight while constantly using my phone. It doesn’t matter if it added percentage, you don’t get this to charge your phone, you get this to extend the battery and it does just that. If you can leave your phone out of your pocket where it can breath/cool a bit you’ll be happy with this. Good product and some seem to be expecting it to cheat physics.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
J
Verified Purchase
Just Chris
San Leandro, US
★★★★★ 5
Quality 100W capable all-in-one USB-C hub from Anker
Style: 7-in-2 4K@30Hz, Style: 7-in-2 4K@30Hz
I recently added a 16" MacBook Pro to the family and with the extra size/weight wanted to slim down on carrying adapters. I also have a 13" MacBook Pro (2018) and wanted something that would work for both of these without any shortfalls. The Anker delivers and works flawlessly on both of my MacBooks. Charging - It offers full rate charging on either unit and so far - hasn't gotten all that warm in the process. I expected a bake fest and me returning it, so was surprised there. Plugs/Ports - I skipped the Hyper-hub craze as I just never liked the fit into my MacBooks. So this is the first dual-port type device I have used on my Mac's, but it fits very well and doesn't feel like anything needs to be forced to work. Likewise on the receiving side, the card slots are friendly and you won't lose your cards, but it still holds them well. The USB-C ports respond well and have worked with all charger cables and dongles that I have. The USB-A's are classic Anker quality. Thinking about this more...I think I actually like plugging and unplugging things in this. There are some brands (cough: UNI) that I wonder if "this is the time" when it breaks on me or keeps my cable end. So far so good on the Anker. Peripherals and what works - I have only used portables on it a few times so I do not have much testing with NVME there yet, but SSD is just fine and works as normal. Only (1) port of this has Displayport active on it (the charge port). So if you are plugging in two screens to one side of the MacBook - that will need to change. At the same time, if you can convert one of those to HDMI you can connect the HDMI and then Displayport (via USB-C) over the charge port. In addition to fitting the ports well I should also mention - on the 13" MacBook Pro and Air this should lie mostly flush with the work surface you are on and the laptop edge. On the 16" MacBook Pro it does have a little gap under it due to the height of that unit. But it still does not protrude past the top edge and won't bug you if you brush your hand over it. TL;DR: At the time of this review I am about a week in. and have removed all the "docks" from my office and home so I can give this a decent test. At 60$ it is more expensive than other options, but performs very well for my needs. Cons: price I guess. I wouldn't mind a GigE Ethernet port on it at the same price point of 60$, or wait for it on sale if you don't care about the port. Big ANKER on the top of It sort of annoying, if I am picking nits. Pros: Quality interface, known brand, works well on multiple years of MacBook with no weirdness or driver problems. Compatible with latest models and software. Color matches the Apple Space Gray acceptably. I hope you found this review helpful, if not - leave a comment and let me know how we can change that! Thanks for reading my review, Chris
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 1, 2020
D
Verified Purchase
Dove
Pawtucket, US
★★★★★ 5
The best USB-C Hub on Amazon!
Style: 7-in-2 4K@30Hz, Style: 7-in-2 4K@30Hz
This is the best and most feature complete USB-C hub I have used. I have tested every feature of the hub and have the results below. These tests were performed on my 2019 Macbook Pro 15" Power - As seen in one of my attached pictures this hub provides a consistent 85W to my Macbook pro. This is based on the 85W power brick I have the hub plugged into. This supports up to 100W so it should be future proof for future higher powered adapters up to 100W. Thunderbolt 3 Port - My coworker let me try his 5k@60hz monitor and it looked absolutely gorgeous and worked like a charm (I am going to have to buy one now!!). I also tested my 2x 4k@60hz monitors and they both were working when plugged into a hub. I used the StarTech Thunderbolt 3 to HDMI adapter (Model #TB32HD24K60) and it worked without any additional configuration. HDMI Port - I was able to get my 4k monitor working in 30hz mode. I was not able to get it working in 60hz mode but that is as expected. This matches the description perfectly. USB 3.0 Ports - I tested both ports with an external SSD and multiple different thumb drives. Every device worked as expected. I was able to max out the transfer rates of my external SSD using this port (~500MB/s). I was able to charge my phone and transfer data over both ports. SD/Micro SD - Both ports work as expected. I tested using an ADATA Premier One Micro Class10 SD card which has an advertised transfer rate of 275MB/s. It is one of the fastest Micro SD cards available so is the perfect test device. The maximum I was able to get in either port was ~230MB/s but that is within my acceptable values. I used a cheaper SanDisk Class 10 micro SD while plugging my ADATA into the SD card port with an adapter and was able to use both ports at the same time with the advertised data rates, amazing! Build Quality - This hub is a tank. It feels very solid and I would be shocked if you could break it in normal use. I tested dropping this 5ft off my desk onto hardwood floor and it did not have a scratch on it. Overall thoughts - This hub is a great value and has every feature I would expect in a modern USB-C hub. I am very happy with the purchase and will update my review with any further thoughts. I hope this review helped you make a purchasing decision!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2020
T
Verified Purchase
Tyler
New York, US
★★★★★ 5
One of the best technology purchases I've made!
Style: 7-in-2 4K@30Hz, Style: 7-in-2 4K@30Hz
I've always been a huge Anker fan. Their products are of great quality and I've never had any issues with them. So when I was buying a new Macbook Pro and wanting to set up a docking station setup for my desk I specifically looked for an Anker dock. One of the most important things to me was the ability to make my desk as minimalistic and clutter-free as possible. This dock is different from most in that it plugs directly into the 2 lightning ports without using a dongle/cord. That allows for a clean and solid connection and mount. It is a little more expensive than the others with less connections, but it had what I needed and was the cleanest. I bought the prior version because the newer version is $10 more and only has a lightning audio output which would only be useful for corded Apple earbuds I believe. I didn't need that. It also has the ability to have power pass through which allows you to plug your charger into one of the USB-C ports and when you dock it instantly starts charging. Here's what I have plugged into mine: - HP monitor in HDMI (had extra laying around) - Logitech webcam into one USB - Anker 60W charger - Pebble USB-C speakers (these are awesome and use the USB-C for both power AND audio output eliminating the need for another 3.5mm aux cord. This is crucial because it allows you to dock the laptop and have everything functional with the single dock rather than have to plug an extra cord in as well) I also have an Apple Magic Mouse and Magic Keyboard which are Bluetooth rather than USB wireless so they do not need a spot on the dock. This setup has worked seamlessly and is so much more ergonomic for long Zoom workdays on a larger monitor than staring at your laptop screen all day. It also gives you the flexibility of a laptop by being able to undock and take your computer anywhere. It really is the best of both worlds. Great work by Anker yet again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 13, 2021

recommand products