granite gear crown 3 60l Granite Gear Crown3 60 Unisex

granite gear crown 3 60l Granite Gear Crown3 60 UnisexUSING SUSTAINABLE PRACTICES, the undyed colourway uses 98% undyed fabrics and materials reducing water waste by 55% in materials. There is so much to love about Granite Gear's Crown3 60. Building off the successes of the Crown2, the Crown3 boasts all of the tested and tried features we love plus some savvy design features to cater for trails where heavier loads are unavoidable. New for the Crown3 is the optional add on capability of reinforcing the

USING SUSTAINABLE PRACTICES, the undyed colourway uses 98% undyed fabrics and materials reducing water waste by 55% in materials. 

There is so much to love about Granite Gear's Crown3 60. Building off the successes of the Crown2, the Crown3 boasts all of the tested and tried features we love plus some savvy design features to cater for trails where heavier loads are unavoidable. 

New for the Crown3 is the optional add-on capability of reinforcing the frame sheet with a U-shaped aluminum stay for treks that require base weights of 15 kilograms and above (sold separately).

The new and innovative Vapor Current Mark 3 compression moulded polyethylene frame sheet has moulded reinforcement channels and die-cut holes to minimise weight without sacrificing structural integrity. The frame works in combination with the moulded foam back panel with ventilation channels to support an efficient load transfer of 15 kilograms comfortably. The frame sheet is fully removable for weight savings when the base weight of the pack doesn't call it.

Throw in a removable lid which converts into a chest pack or lumbar pack in conjunction with the hip belt, and it's winner-winner-chicken-dinner.

For ultralight loads, the frame sheet can be removed lowering the weight to 907 grams. 

FEATURES

Fabrics
100D Robic High-tenacity nylon with Barrier DWR
210D Robic High-tenacity ripstop nylon with Barrier DWR
Stretch Mesh Fabric

Suspension 
Vapor Current (V.C.) Mark 3 Frame with 15kg load rating
U-shaped aluminum stay (add on)

Body

• V.C. (Vapor Current) Mark 3 Frame with 15kg load rating
• Dual density shoulder harness with load-lifter straps and dual removable sternum straps
• RE-FIT fully adjustable dual density hip belt 26-42 inches
• Dual large hip belt pockets with DWR treated zippers
• Roll top main compartment opening with top
• Compression straps for quick access and easy compression
• Hydration port & internal hydration sleeve
• Removable lid has a compartment with DWR treated zipper, and mesh divider pocket on interior
• Lid converts to a lumbar pack with hip belt removed
• Lid converts to chest pack for weight distribution and access
• Large side fabric pockets with cinch closure
• Stretch mesh front pocket with wider top opening
• 3M Reflective logo for visibility
• Bottom gear loops for cord customisation
• Pair of elastic bottle holders on both should straps

SPECIFICATIONS

Short
Volume: 60 L
Torso: 15" - 18" inches 
Lid: 5L  |  5g
Weight: (pack) 1045 g excluding lid
              (total) 1050 g
Load capacity: 15 kg 
                          15 kg + with aluminum stay

Regular
Volume: 60 L
Torso: 18" - 21” inches 
Lid: 5L  |  5g
Weight: (pack) 960 g
              (lid)
Load capacity: 15kg

Long
Volume: 60 L
Torso: 21” - 24" 

inches 
Weight: (pack) 992 g with frame sheet
              (5 litre lid) 5g
              (total) 1080 g
Load capacity: 15 kg 
                          15 kg + with aluminum stay

(Please measure torso size correctly before purchasing. Contact us for assistance. Aluminum stays due at the end of August.)