Pay in installments of $5.84 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 3 - Aug 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
nissan nv200 markise Vantech H2.1 Roof Rack for Nissan NV200The H2. 1 is the lighter but just as rigid iteration of Vantech's original H2 system with increased usability and ease of install, while reducing the weight of the entire system by 20%. Vantech did this by reinforcing pressure points and joints while reducing the material needed in non weight bearing areas. They also increased modularity by adding more crossbar mounting holes at shorter intervals so you can decide where and how many crossbars to use.
The H2.1 is the lighter - but just as rigid - iteration of Vantech's original H2 system with increased usability and ease of install, while reducing the weight of the entire system by 20%. Vantech did this by reinforcing pressure points and joints while reducing the material needed in non-weight-bearing areas. They also increased modularity by adding more crossbar mounting holes at shorter intervals so you can decide where and how many crossbars to use. This will allow users to compensate for solar panels, roof vents, etc. Vantech has also designed a series of front and rear end accessories that allow users to tailor our system to their individual needs.
Configuration Options
The AA configuration is simple and clean. Two "loop" or "' style end caps on each end of the system closes off the holes of the side rails, and leaves an open ended rack for cargo such as ladders, canoes, and surfboards.
The AB configuration is simple, yet versatile. The "' front is composed of two "loop" or "' style end caps at the front of the system. The "' roller on the rear allows for easy loading and unloading. It also protects your roof line and any high mounted brake lights or reflectors from accidental loading/unloading damage.
The DD configuration utilizes a 40 degree angled faceplate for both the front and rear end. The angled front faceplate acts as a wind foil, and reduces drag as well as wind noise when traveling. It also channels air over and around any low profile cargo like ladders and folding tents. The rear angled faceplate reduces drag and wind noise by allowing air to pass over and around it in a smoother fashion. It should be noted that both the front and rear end can be installed upside down in order to turn the entire system into a large roof basket.
The EB configuration is ideal for hauling larger and longer cargo. The "E' front end acts as an extension to the overall system by adding an extra cross bar up front. This crossbar adds an extra 19.5 inches of space to the H2.1 system, and allows for fog lights and other clamp-mounted accessories to be seamlessly integrated to the system.The "' roller on the rear allows for easy loading and unloading. It also protects your roof line and any high mounted brake lights or reflectors from accidental loading/unloading damage.
The FD configuration allows for the integration of fog lights without compromising cargo space. The "F' front end extends the system by 19.5 inches, as well as adds a lower bar to mount accessories to. There is an 8 inch space between the bottom and top rail of the "F' piece, which allows for a variety of fog lights and lightbars to be mounted. The top rail of the "F' piece falls in line with the rest of the cross bars, so laying platforms, cargo or paneling can be done seamlessly. The rear "D' faceplate is angled at 40 degrees to reduce drag and wind noise by allowing air to more easily pass over and around it. Please note that the "D' piece can also be installed upside down to create a basket style rear end for the system. *fog lights NOT included*
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Comfortable for daily use!
Color: Dark, Color: Dark
After using this chair for work and general desk time, I think it does a nice job balancing comfort, adjustability, and overall build quality without feeling overly bulky or cheap. It feels designed for people who spend long stretches at a desk and want something supportive but still comfortable enough to relax in occasionally.
Assembly was straightforward. The instructions were clear, the hardware was organized well, and all the holes lined up properly during setup. I put it together by myself in around 20 minutes without needing extra tools. Once assembled, the chair immediately felt sturdy and stable rather than wobbly.
The overall quality is solid for this price range. The PU leather has a soft feel and doesn’t have the stiff plastic-like texture some office chairs use. The stitching looks clean, the armrests feel secure, and the rolling base moves smoothly across the floor. The chair also feels durable overall, especially around the frame and base where cheaper chairs sometimes feel weak or shaky after a few weeks of use.
It's very comfortable. The seat cushion is thick and supportive without feeling overly hard, and it stays comfortable during long work sessions. I’ve spent multiple hours at a time sitting in it without constantly adjusting positions or feeling pressure points. The mesh section in the backrest also helps airflow a bit, which keeps it from feeling too hot during extended use.
The lumbar support is great. The backrest naturally follows the curve of your spine and provides good lower back support while still feeling relaxed enough for casual sitting. I also liked the higher back design since it supports the upper back and shoulders well during longer periods at the desk.
The flip-up armrests ended up being more useful than I expected. They make it easy to slide the chair under the desk when not in use, and they also give more room if you like sitting cross-legged occasionally.
Solid chair overally. It has a good mix of comfort, support, ease of use, and practical features without feeling overpriced.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 4
Comfortable, easy to assemble, but no adjustable armrests
Color: Dark, Color: Dark
The Marsail Executive Office Chair Ergonomic Desk Chair with Flip-up Armrests PU Leather was an easy to assemble chair; I was done within 15 minutes with the included tool. Extra screws were included which was nice as the main pack had broken open and I couldn't find one of the primary screws in the larger box (my guess is I probably tossed it on accident with the packaging material) but had the backup so all was well. The instructions were well written and clear.
I've now had the chair in my office for over a week. For context; I work from home and also am a PC gamer so I spend a sizeable portion of my time at my desk in the chair. I also live in the southeast US and its April when I am writing this review. With that said; its been in the 70s/80s regularly so feel like I can comment fairly on its performance in warmer temps; though I'll have to try and remember to comeback and update it for the summer season when AC is on full blast and humidity is higher (and the inevitable "swamp butt" sets in).
In the first week I've found the chair to be comfortable to sit in. It is wide enough and the arm rests to the side enough that I can sort of lean left and right without much trouble. I like this wider seat and armrests compared to chairs with more narrow span as I tend to shift and move a lot while sitting.
The PU leather material feels nice against my clothes and does "grip" the clothing which helps with my tendency to want to slide forward when sitting. At first I thought the "grip" would be annoying but I sort of like it after a week of using the chair.
The cushion material is comfortable for sitting and rebounds well after I've been sitting in it for a long period of time. The armrests feature the same sort of cushion and PU leather material which makes them comfortable to sit back and lean on.
For the price I think this is a solid office chair and a comfortable option. Longevity will only be tested over time so I'll see if I can remember to update this review over time. I am happy with the chair in my office.
A few downsides about the chair that I have:
- The wheels are very stiff and don't roll as smoothly as I'd like. They stay put when I am sitting at the desk but when I need to push away they take a bit of force.
- The arm rests can't be adjusted for height. They are one height and can only be moved out of the way completely. For someone like who likes to lean or shift sides this is less than ideal as I'd normally make adjustments to the armrests. With that said it is nice to be able to move them out of the way completely when I don't need them.
- Lumbar support could be better. I will be using additional support in the chair for my back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2026
★★★★★ 5
Good for sitting on it daily. Not that soft as expected
Color: Dark, Color: Dark
I’ve been using this chair for a few days now and overall it’s pretty solid for a home office setup, especially for the price range. Assembly took me about 30–40 minutes alone and all the parts were labeled clearly. Nothing arrived damaged and the instructions were easy to follow, though attaching the backrest was a little awkward with one person.
Once assembled, the chair looks clean and professional. The PU leather feels smooth and the cushioning is definitely thicker than cheaper office chairs I’ve tried. It’s comfortable for working several hours at a time, although I wouldn’t describe it as super plush or “sink-in” soft. The seat has a firmer feel, which may actually be better for posture during long work sessions.
The ergonomic support is decent. The backrest follows the shape of your back fairly well and gives noticeable lumbar support compared to flat office chairs. I spend a lot of time at my desk and this chair helped reduce some lower back discomfort. The reclining and rocking feature is also nice for quick breaks between meetings or while watching videos. It doesn’t recline extremely far, but enough to relax a bit without feeling unstable.
One feature I ended up liking more than expected was the flip-up armrests. They make it easy to slide the chair completely under the desk and also give more room if you like sitting cross-legged occasionally. The chair rolls smoothly and feels stable even when leaning back.
A couple downsides though. The faux leather can get warm after extended sitting, especially in a warmer room. The mesh section helps airflow a little, but not enough to fully prevent heat buildup. Also, while the chair is comfortable, it doesn’t quite feel “premium executive” level in terms of materials. Some of the plastic components and armrests feel more mid-range than luxury.
Overall, I’d say it’s a good value office chair with solid comfort, decent back support, and practical features. Great for everyday work or study use, just keep expectations realistic if you’re looking for a super high-end executive chair feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 5
Comfortable chair constructed with good quality materials
Color: Dark, Color: Dark
Having purchased several chairs from Amazon over the years, I would rank the Marsail Executive Office Chair Ergonomic Desk Chair as one of the better quality options I've received. Here is a breakdown of my experience:
Build Quality & Aesthetics
I was immediately impressed by the quality of the base. It is crafted from brushed metal and has a substantial, premium feel that sets it apart from cheaper plastic alternatives. Additionally, the pneumatic height adjuster was easy to install and operates very smoothly.
Comfort & Ergonomics
-- Padding: The padding is not quite as thick as I expected, but it has proven to be very comfortable to sit in so far. Sometimes I am in the chair as much as 10 hours per day, and the foam in the seat holds it's form all day.
-- Support: The chair does not include built-in lumbar support, so I am using a lumbar pillow. However, I actually find this preferable; it allows me to adjust the pillow to my exact needs or remove it entirely depending on how I'm feeling.
-- Head support and tilt: I like to work in an upright position, but I sometimes i like to lean back for a rest. The chair leans back just enough to allow me to rest my head, but not so much that I feel like it will tip over. The head support is subtle too - it doesn't hurt my neck or force me to rest in an awkward position.
Functionality
-- The mobility of this chair is excellent. The wheels are high-quality and roll very smoothly on my hardwood floors, which is often a pain point with other office furniture.
Final Verdict
Despite the thinner padding and lack of integrated lumbar support, the superior materials and smooth mechanics make this a decent value for the money. It’s a sturdy, well-made piece of furniture.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 4
Good quality office chair with movable arms
Color: Dark, Color: Dark
This chair was relatively easy to put together. After unboxing and laying out all of the parts, my husband and I built it in 22 minutes. We noticed how the instructions have you put the tilt mechanism bracket on after putting the back and arms on. Another chair we built was the opposite, which made attaching it to the base actually easier. That way just made more sense.
This way, you put the back and seat together using the arms, then you attach the tilt mechanism to the bottom of the seat, but the seat is at an angle when you do this. Then you lift the whole chair and place it down onto the legs. I'm glad there were two of us to do that part. We also noticed one of the holes for screwing in the arm bracket was not lined in metal like the rest of them were. It still worked, though.
It does rock a bit back and forth. The height adjusting rod also locks the chair in place for when you don't want the chair to lean back. There is a knob underneath that allows you to loosen or tighten how much it moves when you lean back or rock.
The material is faux leather. It looks like real leather and feels pretty good. This makes it easy to clean. The arms can be raised level with the back of the chair to make it easy to slide out of the side of the chair. Overall this chair has a pretty classic look to it and is comfortable to sit in. It even has some lumbar support.
The way the back of the chair and the seat of the chair connect together leaves a little bit of a gap. Nothing major, but you could lose coins or keys through the gaps between the cushions. If you have a cat, this would be a great way for them to poke their paws through and say hello.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026