bmc sattelstütze slr01 BMC Teammachine SLR 01 Two Bike

The BMC Teammachine SLR 01 Two is the premium build on BMC’s fifth-generation climbing race platform — the same Teammachine SLR 01 Gen 5 frame that defines BMC’s lightweight race lineup, now equipped with Shimano Dura-Ace Di2, a dual-sided 4iiii power meter, DT Swiss ARC 1100 38mm carbon wheels, and the ICS Carbon Evo one-piece cockpit. The complete bike weighs 6.6 kilograms at size 54. That’s the kind of weight that makes itself known the moment the road pitches upward, and it’s achieved here without sacrificing any of the drivetrain sophistication or data quality that serious training and racing demand.

The Gen 5 SLR 01 frame was rebuilt for this generation to be lighter and more aerodynamically refined than any previous Teammachine SLR. BMC’s Aerocore Design integrates two carbon bottle cages directly into the tube profiles of the down and seat tubes — the cage geometry follows the frame’s shape so closely that drag remains low whether the bike is loaded with bottles or empty. ICS Technology stealth cable routing eliminates all exposed housing from lever to caliper through both frame and fork. TCC Race Compliance is tuned into the rear triangle: the rear end absorbs road vibration and maintains tire contact on rough surfaces while the front end stays sharp and direct. Tire clearance runs to 32mm. The fork runs 48mm offset in sizes 47–51 and 43mm in 54–61, adjusting the handling character subtly by size to maintain consistent feel across the range.

The drivetrain is Shimano Dura-Ace Di2 from end to end — R9270 shifters, derailleurs, and hydraulic disc brakes with 160mm Dura-Ace rotors front and rear. The Dura-Ace FC-R9200 crankset runs 52/36 chainrings paired with an 11-30T cassette, and the 4iiii Precision Gen3+ power meter measures both left and right independently. That distinction matters: single-sided power meters estimate one leg and multiply by two, which produces accurate total watt data but tells you nothing about balance between legs. The dual-sided Gen3+ on this build gives you genuine left/right data — relevant for training with imbalance correction and for racing with precise effort management. The ICS Carbon Evo one-piece cockpit — 127mm drop, 70mm reach, 8° flare — is BMC’s current-generation integrated bar and stem, stiffer and more aerodynamically refined than the previous Aero Gen 2 version. The Fizik Argo Vento R1 saddle on 140mm width sits at the top of Fizik’s road saddle lineup.

Design Benefits

1. 6.6kg Complete Build Weight: At 6.6 kilograms with Dura-Ace Di2 and a dual-sided power meter, the SLR 01 Two is among the lightest fully-equipped production road bikes available. The Gen 5 frame’s weight reduction over its predecessor compounds with Dura-Ace’s lighter component weights versus Ultegra, producing a total build weight that requires no compromise.
2. Dual-Sided Power Meter: The 4iiii Precision Gen3+ on this build measures both legs independently. For riders who train with structured power data, this means accurate balance information rather than an estimated figure. For anyone returning from injury or managing chronic asymmetry, it’s the only meaningful way to track left/right progress over time.
3. DT Swiss ARC 1100 DICUT 38mm Wheels: At 38mm depth, the ARC 1100 hits the practical sweet spot for a climbing-focused race build: aerodynamically efficient on fast descents and rolling terrain, not a liability in the crosswind conditions common at altitude. DT Swiss 180 DICUT hubs with the ratchet EXP 36 freehub deliver 36 points of engagement and long-term serviceability that deep-section carbon wheels often sacrifice.
4. ICS Carbon Evo Cockpit: BMC’s updated one-piece carbon bar and stem is stiffer and more aerodynamically effective than the previous Aero Gen 2. The 8° flare opens the drops for a more natural wrist position on long descents, and the fully internal routing through the one-piece unit keeps the front end clean from lever to fork crown.
5. Aerocore + TCC Race System: The Aerocore integrated bottle cages reduce drag when the bike is loaded — a detail that matters in a road race where you can’t choose to go without bottles. TCC Race Compliance tunes road feel without softening pedaling response: the rear triangle is compliant where it reduces fatigue, stiff where it converts watts to speed.

Final Take

The BMC Teammachine SLR 01 Two is a complete answer to what the best climbing race bike looks like at a real-world price. The Gen 5 SLR 01 frame is BMC’s most aerodynamically advanced climbing platform, Dura-Ace Di2 is the right groupset, dual-sided power data is the right meter spec, and the DT Swiss ARC 1100 38mm wheels are the right depth for a bike that will spend its best days on mountain passes. At 6.6 kilograms, this is a bike that earns every gram it doesn’t weigh.