Pay in installments of $5.35 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
bosch e-bike display kiox 300 abnehmen MagCAD Bosch Kiox E-Tube 300 Adhesive MountMount the Bosch Kiox 300 e bike display on your top tube with this MagCAD Mount. What's Included 1x 3D printed mount. 2x M3x12mm cap screws. 1x 3M double sided pad. 1x isopropyl (alcohol) wipe. Please Note: The Bosch Front Rear Plug Interface is typically supplied with the Bosch Smart System on your bike, pictured here for reference only but not supplied. You may also need different cable lengths depending on your specific installation. For UK
Mount the Bosch Kiox 300 e-bike display on your top tube with this MagCAD Mount.
What's Included
- 1x 3D printed mount.
- 2x M3x12mm cap screws.
- 1x 3M double sided pad.
- 1x isopropyl (alcohol) wipe.
Please Note: The Bosch Front/Rear Plug Interface is typically supplied with the Bosch Smart System on your bike, pictured here for reference only but not supplied. You may also need different cable lengths depending on your specific installation. For UK customers these can purchased from True North Cycle Hub and for international customers from your local Bosch dealer.
Overview
This mount is another collaboration with our friends at True North Cycle Hub in the Peak District, specialists in e-bikes and all things MTB.
The mount allows you to position the Bosch Kiox 300 e-bike display on your MTB top tube, removing the requirement for the fairly bulky and unsightly stock handlebar mount. The top tube position allows clear sight of the Bosch display whilst keeping the unit better protected from dirt and debris.
Developed in some of the best and harshest MTB terrain in the UK, the MagCAD mount is extremely robust, designed to out-perform and out-last other display mounts and keep your device secure.
Application
This MagCAD mount has been designed to suit as many MTB top tubes as possible. The contacting face has a subtle radius (see CAD drawing) that our testing showed to work with a wide range of models. We can also produce mounts with a flat contacting surface or more severe radius if required. Feel free to get in contact for more details.
To fit the MagCAD mount follow the below instructions. Particular care should be taken to ensure the mount has good adhesion with your top tube and should be checked regularly. Severe use and harsh conditions may require the tape to be replaced more often.
Removing and separating the Bosch Kiox front/rear plug interface:
- Remove the Bosch Kiox 300 display from the OEM handlebar mount with a pull down and off motion.
- Remove the OEM handlebar mount from your bike by loosening and removing the securing screw.
- Separate the Bosch Kiox 300 front/rear plug interface from the OEM handlebar mount by loosening and remove the two M3 screw in the back of the mount.
- The OEM handlebar mount is no longer required. The Bosch Kiox 300 front/rear plug interface will be attached to the MagCAD mount.
Assemble the MagCAD mount:
- Fit the Bosch front/rear plug interface to the MagCAD mount and torque tighten the 2x M3 cap screws (supplied) to 1Nm, through the rear of the MagCAD mount.
- Offer up the MagCAD mount to your bike's top tube without the double sided pad and check the curvature of the mount is a good match for your top tube.
- Fit the Bosch Kiox 300 display to ensure there is enough clearance to install and remove it once fitted.
- Route the two Bosch cables into the MagCAD mount assembly and check there is sufficient length with your handlebars on full lock both ways. Longer cables can be purchased from your local Bosch dealer.
- Depending on which Bosch plug interface you have (front or rear), the MagCAD mount can be fixed with cables existing the top or bottom. For assemblies with cables existing the bottom you can then loop cables back towards the front of your bike and locate them in the side of the MagCAD mount.
- If the double sided pad needs modifying now is the time to do so. A large contact area is better for adhesion. However, you may wish to trim the double sided pad to avoid overhangs and small features in your top tube.
Fixing the MagCAD mount to your top tube:
- Clean the contacting surface of the MagCAD mount and area of your top tube with the isopropyl (alcohol) wipe, provided. Other products that leave no residue can be used but care should be taken to avoid damage to the paint/lacquer.
- Allow the two cleaned faces to fully dry.
- Peel one side of the double sided tape and install tape on the MagCAD mount.
- Peel the second side of the double sided tape and install the assembly on your top tube.
- Push the assembly down in position for 30 seconds to ensure good adhesion.
- Install the two Bosch cables with a click.
- Install your Bosch Kiox 300 display.
- Turn the system on and check full operation before riding.
Compatible With:
- Bosch Kiox 300 Display.
Specifications
- Weight: 9 grams (without hardware).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 4
German Shepard destroy
Size: Medium (Pack of 1), Color: Orange Gecko, Size: Medium (Pack of 1), Color: Orange Gecko
We've been playing with this lizard for a month now and the fabric has been ripped off within first few days but my dog hasn't got to the squeakers yet.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 10, 2026
★★★★★ 5
This worm, pretty sure it’s a worm and not a snake, can take a lot of abuse.
Size: X-Large (Pack of 1), Color: Blue Snake, Size: X-Large (Pack of 1), Color: Blue Snake
Snake, worm, whatever, my dog doesn’t care, she loves it all the same. My little friend can be kinda rough with her toys. This is no exception. The pictures are from roughly one month of giving it to her and include playing with it at least every other day or so. The top is holding up well, but the bottom has taken some damage, and two of the squeakers have long since been destroyed. Despite this, my dog still loves playing with it. We normally play tug of war together, but on her own she chews at it to get to the squeakers inside, which she promptly destroys, which I’m totally fine with, as quiet toys are much preferred, by me, not her. I believe there are 4 in the XL size that we got. We’ve had a few of these in the past. We tend to get about 6 months out of them. After she “lovingly” removes the squeakers, she doesn’t chew on it much, and we just use it for tug of war, but at that point she’s done enough damage to the underside that its time is limited. But, as it’s pretty low priced, for the time and enjoyment we do get out of it, it’s very much worth it. I do need to clarify, the durability is actually quite good, I don’t fault the product as at all, it’s just my dog is equally as good with destruction, but it should be noted this toy does last much longer than most of her victims. The color, (we got the blue and green) is also very vivid and nice, as is the texture. We’ll be purchasing again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 23, 2024
★★★★★ 5
Awesome toy!
Size: X-Large (Pack of 1), Color: Blue Snake
My pitbull Stella loves these! Ive bought her two of the smaller snake toys in the past and she Absolutly loves them! The first one lasted about 6 months which is a lifetime compared to how long her other toys last lol and the second one lasted about the same. This time I decided to get the XL version. It has 6 squeakers instead of 3 like the smaller versions. I picked the teal and purple colors and it's like 43 inches long I think. Its the same length as her and shes a large size dog. She loves this thing! Its so cute watching her squeak each of the squeakers with her nose.
While this is a great toy it is not chew proof. In fact its quite easy for an experienced chewer to get into this toy. It is relatively strong but it wont stand a chance with a power chewer. Like I said this is the third one of these I have bought in roughly a year. They do last longer then more soft toys I will give them that. This is the only soft toy she has not destroyed in 5 mins. But after a week or so at least one squeaker will be missing.
For the average dog one of these snake toys will last a really long time and they are fun to play with. We play tug of war and fetch with it. Stella also loves when I squeak the toy she will squeak it back and we'll go back and forth for hours lol. One last thing it is loud! If noisy toys bug you, don't get this. The sqeakers are industrial strength lol
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 7, 2021
★★★★★ 4
Durable toy but definitely NOT invincible
Size: Medium (Pack of 1), Color: Orange Gecko
BACKGROUND
I have two labradors and, with my friends dogs over, we have a combined combination of five labradors at a time. If you have seen the film "Marley & Me" then you will understand our dogs. They tear through concrete, dry wall, and, well, just about anything they can get their paws and mouths on. It is very important to have plenty of toys for them to keep pre-occupied as most of the destruction is caused by dogs that are bored.
Unfortunately, many items are not able to withstand this combined destructive force. I spotted these "Invincible" line of toys and thought they were worth a try. I ended up ordering basically one of every style and size.
APPEARANCE
The toys come in different sizes, colors, and shapes. The most common are the Gecko and the Snake. The toys are covered with a more durable cloth that is fuzzy and suppose to withstand quite a bit of chewing. Inside the toys are what are described as durable squeakers that, if punctured, will still squeak even after hours of being bitten and chewed upon. The larger the toy ordered, the more squeakers that are sewn into the toy.
RELIABILITY
I have to admit these toys did last about ten times as long as any other toy I have given my dogs. Unfortunately, nothing is indestructible. My dogs managed to find kinks in the lining of the toys that, once penetrated, will cause the toys to open leaving stuffing and squeak toys all over the place. The squeakers did withstand quite a bit of chewing before the squeaking went silent.
I noticed that the snake toy did last quite a bit longer than the gecko or the little dragon characters. The snake had separate compartments for the squeakers and so, if one was torn out, the others survived. On the Gecko once its middle section was torn open the squeakers were lost.
CUSTOMER SUPPORT
Not utilized
PROS:
++ Lasted about 10X times the length of time as other "invincible" toys
CONS:
++ They are not truly "invincible" and will be destroyed over time
CONCLUSION
The invincible line of toys did last a lot longer than most toys that I have purchased for my labradors. I would recommend the snake over the gecko or other styles. I have had to toss the geckos as they were shredded but the snakes are still with me to this day six months later. Also note, even though "Invincible" is in the title, these toys are definitely not although you will save an incredible amount purchasing these toys once and having a gradual destruction process versus having to buy new toys continuously over the same period of time that these lasted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 18, 2012
★★★★★ 3
The toy is no match for my dogs.
Size: Large (Pack of 1), Color: Pink Snake
The toy itself is well made and the squeaker work well. Unfortunately, it only lasted about 2 weeks before my Treeing Walker Coonhound pup (super chewer) had it shredded. My Plott hound ( heavy chewer) just loved these! She is older and they last longer for her. However she does love to go for the seems first then rips out the squeaker. But she will carry it around for months like that. I think she like the material. I'll probably go back to Walmart for the smaller cheaper ones for now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2026