SKU: 65270045597
rockrider mtb 500 helm

rockrider mtb 500 helm Mountain bike helmet st 500 – Sunny Outdoors

Sale price$18.68 Regular price$20.76
Save 10%

Pay in installments of $5.19 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 23 - Jul 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

rockrider mtb 500 helm Mountain bike helmet st 500 – Sunny OutdoorsThis well ventilated, adjustable mountain biking helmet is designed for cycling and MTB USER COMFORT Forget it's there: its comfortable removable foam pads prevent pressure points. ADJUSTABLE The 3D tightening dial guarantees a good hold during your rides. EASE OF USE Fixed side straps. Quick and easy to pull your pony tail through. VENTILATION Air circulates through the 17 vents. COMPATIBILITY Compatible with a ponytail and a rear clip on light

This well-ventilated, adjustable mountain biking helmet is designed for cycling and MTB

USER COMFORT

Forget it's there: its comfortable removable foam pads prevent pressure points.

ADJUSTABLE

The 3D tightening dial guarantees a good hold during your rides.

EASE OF USE

Fixed side straps. Quick and easy to pull your pony tail through.

VENTILATION

Air circulates through the 17 vents.

COMPATIBILITY

Compatible with a ponytail and a rear clip-on light

IMPACT PROTECTION

Complies with EN 1078

LIGHTWEIGHT

Size S: 280 g
Size M: 320 g
Size L: 370 g

FEATURES

17 vents
Chinstrap fastening: clip
Occipital adjustment: 360° dial.
Comfort foam: detachable and washable (available from after-sales)
Visor: fixed, detachable.
Outer shell: polycarbonate Inmold.
Compatibility: ponytail and clip-on light (rear).
Space requirements, size M: Length: 30 cm, width: 21 cm, height: 15.5cm

HOW DO YOU CHOOSE YOUR MOUNTAIN BIKE HELMET SIZE?

To find your helmet size, simply measure your head circumference (around the forehead). This mountain bike helmet is available in three sizes:
S: 52 - 55 cm
M : 55 - 59 cm
L: 59 - 62 cm

EN 1078 CERTIFIED

European standard setting out the requirements and test methods for helmets to be worn by users of rollerblades, skateboards, scooters and bicycles. The corresponding requirements and test methods cover the following aspects: construction, including field of vision; shock absorption properties; characteristics of the retention system, including the chinstrap and tightening devices; marking and information.

CUSHIONING FOAM

A cushioning foam replacement kit is available for this helmet on our website

Please note that on some helmets, the colour of the EVA cushioning foams (those in contact with the top of the head) may vary.

WHEN SHOULD I REPLACE MY HELMET?

We recommend replacing your helmet in 2 cases:

1/ After a fall:
In the event of a fall, your helmet's material can deteriorate or even break. Sometimes, you won't even notice. That is why we recommend replacing it if you have the slightest doubt.

2/After 5 years of use:
The foam deteriorates. It can deteriorate due to impact, where it is stored, the climate, and its use. We therefore recommend replacing your helmet at least every 5 years.

HOW DO YOU ADJUST THE HELMET?

3 quick steps for adjusting your helmet in 2 minutes:
1/ If needed, pull your ponytail through the back of the helmet (lower the dial's rim).

2/ Adjust and clip the buckles on the 2 straps: check that you can still slide 2 fingers between the strap and your chin.

3/ Adjust the tightness around your head using the rear dial.

The helmet should be in contact with your head, without tipping forward, backward, or sideways, even when you're moving.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 65270045597

Discover Niche Categories That Outsell rockrider mtb 500 helm

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
rkruz
Omaha, US
★★★★★ 4
Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab. The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite. To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place. The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me. No backlight on the switch, which is a necessity, and I dont understand why that feature is not present. Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well. 5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023
K
Verified Purchase
Kevin Sanguansukdikosol
Natrona Heights, US
★★★★★ 5
Brightness and quality
Color: 4*2.5in Cube LED Pod
Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
T
Verified Purchase
Thomas Chapman
Pawtucket, US
★★★★★ 5
Bright lights
Color: 4*2.5in Cube LED Pod
Installed these on my Bronco as ditch lights. Very bright light and I like that you can have them be white or put the cover on them for and amber light look. Took about 30 minutes to install and wire to the upfitter switches. They shoot a wide angle covering your blind spots on dark roads. I got these to replace a three inch ditch light. They're made from heavy duty metal and stand up to the extreme weather. I like them so much that I purchased the seven inch lights and install them on the front bumper. For what they cost it was a price that I couldn't pass up. I highly recommend these lights.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
A
Verified Purchase
Abraham Hazim
Draper, US
★★★★★ 5
Great product
Color: 4*2.5in Cube LED Pod, Color: 4*2.5in Cube LED Pod
Great lighting and beautiful design!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
M
Verified Purchase
matt
Massapequa, US
★★★★★ 5
Best lights you can get for the best pricing!
Color: 5in Round LED Pod, Color: 5in Round LED Pod
I have had man different off road lights over the years for many different vehicles. Let me tell you about these 5” aux beams. I ordered these lights to go on my 2500 as ditch lights and I am beyond impressed! The lights showed up well packaged. When opening the box, the instructions where right on top and by far one if the easiest sets of instructions I’ve had for wiring diagrams. The lights were packaged and wrapped in foam all the way around to protect them from shipping. The wrapping of the lenses for scratch prevention was perfect. The included wiring harness was packed in a bag and laid out very easily for installation. The harness hooked to the battery and then to the lights with easy quick connects and had more than enough length to put the lights anywhere. Once they were mounted and installed I hooked them up to my aux beams switch panel with ease. Now for the lights! The brightness is beyond bright enough to see miles away! These lights will shine anything you could ever want to see. The spot flood combo work exceptionally well for all situations and darkness. The side shooter stretch them beam out to the sites and can see all the way across. The running lights tie in very easy with your turn signals for extra turn lights or running lights. Heavy duty is an understatement for the quality of these lights. I’m still running them after several months with no water intrusion and still as bright as the day I installed them. The price for what you get, is far beyond better than other top brands! I will be buying more of these for my next off roading set up!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 23, 2025

recommand products