SKU: 2860093901
xtreme fahrradwerkzeug

xtreme fahrradwerkzeug DIRODI XTREME Electric Bike (GEN 3) – Drift Bikes

$24.98 $27.75
Save 10%
No.2 Bestseller on virtipatel.com >

Pay in installments of $6.94 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 3 - Aug 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

xtreme fahrradwerkzeug DIRODI XTREME Electric Bike (GEN 3) – Drift BikesDIRODI XTREME Electric Bike (GEN 3) Shipping options (choose option at checkout once added to cart): 1. Ship to home ($150) Get your new bike delivered in a box. ATTENTION: Whilst minimal assembly is required, basic mechanical skills and proper tools are a must. If your order includes additional items, they may arrive separately from the bike. We highly recommend taking your bike to a local bicycle mechanic if you are in any doubt when attempting

 

DIRODI XTREME Electric Bike (GEN 3)


Shipping options (choose option at checkout once added to cart):


1. Ship to home ($150)

Get your new bike delivered in a box. ATTENTION: Whilst minimal assembly is required, basic mechanical skills and proper tools are a must. If your order includes additional items, they may arrive separately from the bike. We highly recommend taking your bike to a local bicycle mechanic if you are in any doubt when attempting assembly. If you decide to take your bike to a 3rd party for assembly or to check over of your own work, additional fees will apply and these are at your own expense. If any damage is evident to the box when it arrives please take photos and contact us prior to attempting assembly. 


2. Drift Bikes Fully Assembled Delivery ($300 - within 50km of store. This cost is made up of $150 for Delivery and $150 for Assembly.)

Get your new bike hand-delivered to your shipping address already professionally assembled by Drift Bikes mechanics. Our team will contact you when your bike is built and ready for delivery. If your order includes additional items, they will be delivered with your bike.


3. Pickup in-store (*FREE)

Pick up your new bike in a box. ATTENTION: Whilst minimal assembly is required, basic mechanical skills and proper tools are a must.

*We highly recommend paying our workshop $150 to professionally assemble your bike. If selecting pick up in store we will contact you to check if you would like to pick up your boxed bike or have it professionally assembled. You can pay for assembly upon pickup. If choosing to take your bike in a box for self-assembly you assume any expenses related to your own mechanical work to be at your own expense.

 

Professional assembly includes:

Full assembly of the bike along with recycling the box (we pay for it to be recycled).

Assembly includes: Checking hanger alignment, pre stressing cables, training brake pistons, test derailleur limits, check ALL bolts along with test riding the

bike to bed brakes in along with re-calibration and finally have the bike checked by a second mechanic. The build also insures we cover all

warranty issues in the first 12 months as well as guaranteeing our build for 90 days and offering a free valued at

$140. We feel we offer exceptional value for the $150 build.

Please note, boxed bikes are stored at our warehouse location and may take up to 2 days to be transferred to the retail store.

Professionally assembled bikes can take up to 10 working days in peak season.

ATT: The 250W (500W for NSW) motor is road legal and doesn't require a licence or registration. The 750W and 1000W motor is for off-road (private property) use only.



About this bike:

 

xTreme Gen 3 is one of the most feature-rich electric bikes in the market. it comes with a high torque (60NM) 250W 48V rear hub motor or a 750W 48V (85NM of torque) rear hub motor, integrated 48V 14AH Samsung battery, Schwalbe Bigben balloon feel puncture-resistant tyres, front suspension forks, integrated ABUS wheel lock, integrated front and rear lights, colourful display, Tektro hydraulic brakes, front carrier, MIK-HD revolutionary click system rear rack, throttle, 8-speed Shimano Altus gear system and an optional 48V 20AH dual battery and many more features for a hassle-free ride.

At DiroDi, we started a project to design the ideal electric bike that includes all the features required for a premium ride experience without any compromise to save cost. xTreme (the step-over version) and Primo (the step-over version) were the outcomes of that project. We are proud of the outcome, xTreme, which is one of the most feature-rich bikes in the market. xTreme gen 3 comes with a high torque (60NM) 250W 48V rear hub motor (or a 750W 48V rear hub motor with 85NM torque), integrated 48V 14AH Samsung battery, Schwalbe Bigben balloon feel puncture-resistant tyres, front suspension forks, integrated ABUS wheel lock, integrated front and rear lights, colourful display, Tektro hydraulic brakes, front carrier, MIK-HD revolutionary click system rear rack, throttle, 8-speed Shimano Altus gear system and an optional 48V 20AH dual battery and many more features for a hassle-free ride.

xTreme gen 3 is equipped with a brushless powerful and high-torque rear hub motor. For ultimate hill-climbing power, the motor torque has increased by 50% (To 60NM) from 40NM in gen 2. xTreme Gen 3 also has an option of a 750W motor, which is for off-road use only and has 85NM of Torque. 

xTreme Gen 3 uses a large size 48V 14AH Samsung battery hidden inside the frame that gives it an attractive minimal look. The hidden battery might make the bike seem non-electrical at the first glance, and that can reduce the risk of theft by itself! It is a removable battery that can be easily brought inside the home or office for a recharge. The battery is located in the centre of the frame, which brings the centre of gravity towards the middle of the bike. This will make it much easier to lift the bike or to ride the bike without any assistance when the battery is flat. 

xTreme has an average range of 60-80km range. On xTreme Gen 3, you can install an optional massive 48V 20AH battery. With the second battery, the total battery size will be 2.4 times the original battery size (34AH vs 14AH), which will increase the range to 170-200km. xTreme gen 3 comes with a battery balancer, which automatically switches to the second battery once the primary battery becomes flat.

DiroDi xTreme uses Suntour front suspension forks to handle bumps and gives you a smooth and comfortable ride. In fact, xTreme is solely designed for the rider’s comfort part by part, from the wide Big Ben tyres and an oversized saddle to premium suspension forks.

The Suntour XCM suspension also has a Lockout feature meaning you can simply lock it. This option comes in handy when you are riding the bike on smooth terrain where there are no bumps. Locking up the suspension will help you get a faster and more rigid ride without bouncing up and down when you don’t need to.

xTreme gen 3 is equipped with a Shimano Altus 8-speed gear system. Shimano Altus provides a silent and smooth gear change experience. Having 8 gears provides a wide gear ratio, which enables you to ride really fast or climb steep hills with ease when needed.

Don’t worry about transporting your bike in your car. The xTreme comes with a quick-release front wheel, which allows you to remove and reinstall the wheel in a minute! This can help you fit your bike in your car as it takes less space once the wheel is removed. And of course, later you can easily reinstall the wheel in under a minute. 

Braking experience plays a critical role in providing the premium ride experience, which xTreme is all about. xTreme comes with best-in-class, Tektro HD-E350 hydraulic brakes with 180mm rotors. Compared to mechanical brakes, hydraulic brakes provide more stopping power with less pressure required on the brake levers. Moreover, the brake pads in hydraulic disc brakes are self-adjusting. So when the pads are worn, automatically the distance between the pads and the rotor is adjusted so you will always have tight brakes. However, with mechanical brakes, you need to readjust the brakes from time to time.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 2860093901

Discover Niche Categories That Outsell xtreme fahrradwerkzeug

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
hearmeout
Draper, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Lake Worth, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Lowell, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Birmingham, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Louisville, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products

KID'S CONCEPT | Tipi-Zelt - Hellrosa
25.57
Slingfin Portal 1 Seam Sealed – Outdoorfeeling.com
28.03
LoneRider | MotoTent | Motorrad Camping Zelt – Rideparts
29.48
2er-Set: UV-Schutz Imprägnierung & Reinigung
22.89
Faltbares Tipi-Zelt für Kinder, Kleinkinderzelt mit LED
27.89