keo bike pedals Look KeO Classic 3 PedalsLook KeO Classic 3 Pedals Simple to use, it is possible to adjustment the cleat entry release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedaling stability. The Ko Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

Look KeO Classic 3 Pedals

Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedaling stability.

The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more grueling to the current industry standard, the EN14781.

The new classic two has 400 mm² surface area which is almost 40% more than the competition. The significance of this is the load is spread around the cleat rather than having a small concentrated area, which improves comfort and reduced foot discomfort.