Pay in installments of $6.33 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
blow up event tent Custom Inflatable Dome Tents: Elevate Every EventProduct Overview Custom inflatable canopy tent in 10x10, 16x16, and 20x20 footprints. The dome silhouette reads at distance in a way a square canopy does not. Print runs on both the exterior canopy and the interior ceiling. 300D ripstop polyester, sealed air design, 3 year warranty. Starting at $2,169. Before you order: initial inflation requires a 3 prong 120V outlet for 10 to 20 minutes. If your primary venues are open fields without outlet access,
Product Overview
Custom inflatable canopy tent in 10x10, 16x16, and 20x20 footprints. The dome silhouette reads at distance in a way a square canopy does not. Print runs on both the exterior canopy and the interior ceiling. 300D ripstop polyester, sealed-air design, 3-year warranty. Starting at $2,169.
Before you order: initial inflation requires a 3-prong 120V outlet for 10 to 20 minutes. If your primary venues are open fields without outlet access, confirm power availability before ordering.
Inflates once. Holds all day.
The sealed-air tube structure reaches full pressure in 10 to 20 minutes, then the blower disconnects. No continuous power required. The dome holds inflation through a full event without sagging or pressure loss under normal conditions.
Print runs inside and out.
Dye sublimation prints across the full exterior canopy and the interior ceiling fabric, so visitors inside look up at a branded surface rather than plain white. Pantone color matching included. The dome reads consistent with your other MVP Visuals products.
300D ripstop construction.
Ripstop weave means a small puncture or surface scuff does not propagate, and a repair patch kit ships with every dome. The most common field issue is a loose connector seal. When that happens, pressure drops gradually rather than suddenly, which gives you time to locate and reseal it before it affects your event.
Connect multiple domes.
A joining cloth bridges two dome openings into a continuous covered structure. A single dome covers a sponsor position or sideline spot. Pair two for a finish line corridor, or scale up to six for a full race village footprint.
No minimums. Free layouts. Free proofs.
Order one dome or a fleet. Digital proofs show how your artwork maps to the curved surface before anything prints. Approve or request changes. Nothing runs until you sign off.
Configure Your Dome
Four decisions: size, walls, awning, and leg color.
Size
| Size | Interior Space | Best For |
|---|---|---|
| 10x10 | 1-2 staff, single footprint | Sponsor tent, sideline position, sampling station |
| 16x16 | 4-6 people, hospitality or staffed booth | Brand activations, race finish setups, multi-use events |
| 20x20 | Large gathering, product launch space | Race village anchor, multi-brand hospitality, entry features |
Walls, Awning & Legs
| Option | What It Does |
|---|---|
| 1, 2, or 3 side walls | Printed panels that enclose part of the perimeter. Single-sided prints the exterior face. Double-sided prints both faces for corridor and center-aisle setups where the reverse is customer-facing. |
| Awning | Extends the front opening as a covered entry arch. Adds a branded surface above the entrance and reads well at approach angle. Common on race finish and entry gate setups. |
| Stock black legs | Ships standard with every dome. No upcharge. |
| Custom-color legs (+$400) | Legs printed to match your brand palette. Most useful when the dome is a centerpiece activation or when ordering multiple domes that need to read as a unified installation. |
What's Included
| Item | Details |
|---|---|
| Air blower | [VERIFY: 250W or 600W] — runs for initial inflation, then disconnects |
| Carry bag | For transport and storage between events |
| Ropes, stakes & D-rings | Ground anchoring on grass and hard surfaces |
| Repair patch kit | Field repairs for punctures and connector seals |
For multi-dome configurations, use the quote form at the bottom of the page. Include your target footprint and event date.
Frequently Asked Questions
Do I need power running to the dome all day?
No. The blower runs for the initial inflation (10 to 20 minutes), then disconnects. The dome holds pressure independently for the rest of the event. You only need outlet access during setup, not throughout the day. An outdoor extension cord to a venue outlet is enough for most setups.
Inflatable dome or traditional canopy: how do I decide?
Traditional pop-up canopy tents set up in 5 to 10 minutes with no power and handle a 40-event season without issue. They're the right product for most trade shows, markets, and general event setups at $500 to $2,000 fully printed. The inflatable dome is right when the tent itself is part of the activation: when the dome silhouette, the interior branded environment, or the multi-dome footprint are part of what you're selling to attendees or sponsors.
How many people does setup take?
Two people for a 10x10. The 16x16 and 20x20 are more comfortable with three people, mostly because of carry bag weight and the staking process. No poles, no connectors, no hardware assembly. Unpack, stake the base, inflate, done.
What happens if the dome loses pressure during an event?
Most pressure loss comes from a loose connector seal rather than fabric failure. When that happens, pressure drops gradually over the next 30 to 60 minutes, not suddenly. That gives you time to find the source, reseal it, and get back to your event without a crisis. A patch kit and sealing instructions are included.
How does my logo look on a curved surface?
The dome canopy curves, so artwork wraps a 3D surface rather than lying flat. The digital proof we send before production shows exactly how your design maps to the curve from every angle. Most operators use full-bleed brand color with a centered logo scaled to read clearly across the arch. Complex multi-element designs sometimes need adjustments for the curved template. We flag any issues in the proof before anything runs.
Can I connect two domes together?
Yes. A joining cloth bridges adjacent dome openings into a continuous covered structure. Joining cloth sizing depends on the specific dome combination and isn't a standard product page variant. Contact us or use the quote form with your target footprint dimensions and we'll spec it.
What does the warranty cover?
The 3-year warranty covers manufacturing defects: seam failures, zipper failures, and material defects from production. It does not cover puncture damage, high-wind damage beyond rated conditions, or damage from improper storage. The blower carries a separate 1-year manufacturer warranty.
Will I see a proof before production?
Yes. The proof shows your artwork across the exterior canopy, interior ceiling, awning (if included), and leg panels. Approve or request changes. Nothing runs until you sign off.
How long does production and delivery take?
Production runs 6 to 8 business days after artwork approval. Delivery runs 5 to 7 business days. For multi-dome builds or event-specific timeline questions, reach out before ordering and we'll confirm whether the schedule works.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 9 reviews
Sort
Product Reviews
★★★★★ 5
Highly Recommend
Color: Silver
Love this holder of all the things! We purchased this 4 years ago and it has work great, rust-free, until my husband piled two pots on it and it broke last night. I am immediately purchasing another one. It is very easy to install and stays put, no movement at all.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 13, 2025
★★★★★ 4
Works well
Color: Silver
The stainless steel caddy quality is fine, the sticker was easy to install on the inside of my stainless steel sink. I initially used the small movable arm to hang on the hooks, and it did not keep the caddy in place. Anytime it was hit, it fell off or tilted off the hooks. Customer service followed up with me on my purchase, gave me the correct instructions with a picture, and I was able to snap the caddy into the hooks. They were responsive, listened to my concerns and answered my questions, and now it works great. I would recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 3, 2021
★★★★★ 5
It doesn’t take up so much space
Color: Silver
This is perfect for my use. I did have to place the sticker on it to hold it in place. I have a Blanco sink which isn’t smooth.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
Negative reviews are misleading it definitely works just fine.
Color: Silver
Noticed the only negative reviews were because the hooks would not fit and was sort of concerned about that, but I figured it might be one of those things where it’s the person’s fault not the product. Sure enough it was. The hook fits, yea you have to push it in there with a slight bit of force, but it definitely does fit. What those people don’t realize is that by design the hooks are like that to keep a firm hold onto the tray itself. I found it funny how mad people were about that when really it’s very very simple to make it work. Nice product sticks well, seems sturdy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2020
★★★★★ 5
Good product, lousy instructions
Color: Silver, Color: Silver
This is a good product with terrible instructions. I’ve used this adhesive strip before so I know how to install the basket & how to remove the strip. To get a snug fit position one of the basket's vertical wires in the middle of one of the horizontal bars then press down hard until you hear it snap into place, it’s now snug & will not tip over. To remove the adhesive strip I used a putty knife & wiggled it underneath the strip until I had loosened & lifted enough of it to get a good grip & pull the rest off. Mine is installed on a ceramic tile back splash not in the sink so this method did not damage the tile, can't say what it would do to stainless steel. I'm a 72 y/o woman with arthritis, if I can get the adhesive off anyone can.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2023